forked from rrcarlosr/Jetpack
148 lines
4.8 KiB
Plaintext
148 lines
4.8 KiB
Plaintext
NVIDIA Tegra SCE aux CPU, with communication via the "IVC" IPC protocol.
|
|
|
|
SCE is an aux CPU which talks to CCPLEX over IVC.
|
|
|
|
The SCE FW implements IVC, and uses HSP IRQs as part of IVC. The
|
|
SCE FW expects AST regions 0/1/2 are already set up for the SCE to
|
|
access FW in DRAM, SYSRAM if applicable, and the IVC memory.
|
|
|
|
== SCE top-level node ==
|
|
|
|
The SCE core is represented by the top-level node including direct HW resources
|
|
such as clocks, resets etc.
|
|
|
|
Required properties:
|
|
- compatible: Should be "nvidia,tegra186-sce-ivc" for T18x.
|
|
- reg: Address entries (SCE EVP, SCE PM. SCE CFG BASE, SCE CPU AST,
|
|
SCE DMA AST)
|
|
Formatted as per standard rules for this property.
|
|
- reg-names: "sce-evp", "sce-pm", "sce-cfg", "ast-cpu", "ast-dma"
|
|
as per the reg property.
|
|
- clock-names: Names of the clocks required by SCE.
|
|
Must include following entry:
|
|
- sce-apb
|
|
- clocks: Should contain an entry for each entry in clock-names.
|
|
See ../clock/clock-bindings.txt for details.
|
|
- reset-names: Names of the resets required for SCE.
|
|
Must include following entries:
|
|
- sce-apb
|
|
- sce-nsysporeset
|
|
- sce-nreset
|
|
- sce-dbgresetn
|
|
- sce-presetdbgn
|
|
- sce-actmon
|
|
- sce-pm
|
|
- sce-dma
|
|
- sce-hsp
|
|
- tsctnsce
|
|
- sce-tke
|
|
- sce-gte
|
|
- sce-cfg
|
|
- resets: Should contain an entry for each entry in reset-names.
|
|
See ../reset/reset.txt for details.
|
|
- nvidia,ivc-channels: List of IVC channel regions.
|
|
For each IVC channel regions (usually, there is only one region):
|
|
- an OF phandle pointing to the list,
|
|
- the region number for Tegra AST,
|
|
- the base address of the region in the remote processor (for address space
|
|
translation),
|
|
- the length of the region in bytes (must be a power of two).
|
|
For IVC channel details, please refer to: ./tegra-ivc-channel.txt
|
|
|
|
Optional properties:
|
|
- nvidia,stream-id: should contain the SMMU Stream ID used.
|
|
|
|
== SCE sub nodes ==
|
|
|
|
* hsp
|
|
|
|
Describes the hardware synchronization primitive(s) used between CCPLEX
|
|
and SCE to signal incoming IVC messages or IVC write room.
|
|
|
|
Required property:
|
|
- compatible: Should match with the device driver implementing the
|
|
cross-processor synchronization primitive.
|
|
|
|
If the HSP doorbell is used for IVC notifications:
|
|
|
|
- compatible: "nvidia,tegra186-hsp-doorbell"
|
|
|
|
- nvidia,hsp-doorbell: <HSP-phandle HSP-ID HSP-DB>
|
|
* HSP is a set of HW synchronization primitives used in Tegra to allow
|
|
multiple processors to share resources and communicate together.
|
|
* HSP-ID is NVIDIA Tegra HSP unique source ID for SCE, used in IPC.
|
|
* HSP-DB is NVIDIA Tegra HSP unique doorbell number allotted to SCE.
|
|
A HSP doorbell allows a set of source agents in Tegra to request the
|
|
attention of specified target agent. In general the agents are processors
|
|
and doorbell used as part of an IPC protocol.
|
|
* For more HSP details, refer: ./tegra-hsp.txt.
|
|
|
|
If the HSP shared mailbox is used for IVC notifications:
|
|
|
|
- nvidia,hsp-shared-mailbox: <HSP-phandle MBOX-NUMBER HSP-phandle MBOX-NUMBER...>
|
|
* HSP is a set of HW synchronization primitives used in Tegra to allow
|
|
multiple processors to share resources and communicate together.
|
|
* MBOX-NUMBER is number of shared mailbox pair
|
|
* For more HSP details, refer: ../tegra-hsp.txt.
|
|
|
|
- nvidia,hsp-shared-mailbox-names:
|
|
Must include following entry:
|
|
- ivc-pair
|
|
|
|
If the HSP shared mailbox is used for boot synchronization:
|
|
|
|
- nvidia,hsp-shared-mailbox: <HSP-phandle MBOX-NUMBER...>
|
|
- nvidia,hsp-shared-mailbox-names:
|
|
Must include following entry:
|
|
- cmd-pair
|
|
|
|
== Possible example ==
|
|
|
|
tegra_sce: rtcpu@b000000 {
|
|
compatible = "nvidia,tegra186-sce-ivc";
|
|
nvidia,stream-id = <TEGRA_SID_RCE>;
|
|
reg = <0 0xb000000 0 0x1000>,
|
|
<0 0xb1f0000 0 0x40000>,
|
|
<0 0xb230000 0 0x10000>,
|
|
<0 0xb040000 0 0x10000>,
|
|
<0 0xb050000 0 0x10000>;
|
|
reg-names = "sce-evp", "sce-pm", "sce-cfg", "ast-cpu", "ast-dma";
|
|
clocks = <&tegra_car TEGRA186_CLK_SCE_APB>;
|
|
clock-names = "sce-apb";
|
|
resets =
|
|
<&tegra_car TEGRA186_RESET_SCE_APB>,
|
|
<&tegra_car TEGRA186_RESET_SCE_NSYSPORESET>,
|
|
<&tegra_car TEGRA186_RESET_SCE_NRESET>,
|
|
<&tegra_car TEGRA186_RESET_SCE_DBGRESETN>,
|
|
<&tegra_car TEGRA186_RESET_SCE_PRESETDBGN>,
|
|
<&tegra_car TEGRA186_RESET_SCE_ACTMON>,
|
|
<&tegra_car TEGRA186_RESET_SCE_PM>,
|
|
<&tegra_car TEGRA186_RESET_SCE_DMA>,
|
|
<&tegra_car TEGRA186_RESET_SCE_HSP>,
|
|
<&tegra_car TEGRA186_RESET_TSCTNSCE>,
|
|
<&tegra_car TEGRA186_RESET_SCE_TKE>,
|
|
<&tegra_car TEGRA186_RESET_SCE_GTE>,
|
|
<&tegra_car TEGRA186_RESET_SCE_CFG>;
|
|
reset-names =
|
|
"sce-apb",
|
|
"sce-nsysporeset",
|
|
"sce-nreset",
|
|
"sce-dbgresetn",
|
|
"sce-presetdbgn",
|
|
"sce-actmon",
|
|
"sce-pm",
|
|
"sce-dma",
|
|
"sce-hsp",
|
|
"tsctnsce",
|
|
"sce-tke",
|
|
"sce-gte",
|
|
"sce-cfg";
|
|
nvidia,ivc-channels = <&tegra_camera_ivc 0x90000000 0x10000>;
|
|
|
|
hsp {
|
|
compatible = "nvidia,tegra186-hsp-mailbox";
|
|
nvidia,hsp-shared-mailbox = <&sce_hsp 1 &sce_hsp 7>;
|
|
nvidia,hsp-shared-mailbox-names = "ivc-pair", "cmd-pair";
|
|
};
|
|
};
|