forked from rrcarlosr/Jetpack
298 lines
9.3 KiB
C
298 lines
9.3 KiB
C
/*
|
|
* Copyright (C) 2014 Freescale Semiconductor
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __LS2_COMMON_H
|
|
#define __LS2_COMMON_H
|
|
|
|
#define CONFIG_REMAKE_ELF
|
|
#define CONFIG_FSL_LAYERSCAPE
|
|
#define CONFIG_FSL_LSCH3
|
|
#define CONFIG_MP
|
|
#define CONFIG_GICV3
|
|
#define CONFIG_FSL_TZPC_BP147
|
|
|
|
#include <asm/arch/ls2080a_stream_id.h>
|
|
#include <asm/arch/config.h>
|
|
#if (defined(CONFIG_SYS_FSL_SRDS_1) || defined(CONFIG_SYS_FSL_SRDS_2))
|
|
#define CONFIG_SYS_HAS_SERDES
|
|
#endif
|
|
|
|
/* Link Definitions */
|
|
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
|
|
|
|
/* We need architecture specific misc initializations */
|
|
#define CONFIG_ARCH_MISC_INIT
|
|
|
|
#define CONFIG_FSL_CAAM /* Enable SEC/CAAM */
|
|
|
|
/* Link Definitions */
|
|
#ifndef CONFIG_QSPI_BOOT
|
|
#ifdef CONFIG_SPL
|
|
#define CONFIG_SYS_TEXT_BASE 0x80400000
|
|
#else
|
|
#define CONFIG_SYS_TEXT_BASE 0x30100000
|
|
#endif
|
|
#endif
|
|
|
|
#ifdef CONFIG_EMU
|
|
#define CONFIG_SYS_NO_FLASH
|
|
#endif
|
|
|
|
#define CONFIG_SUPPORT_RAW_INITRD
|
|
|
|
#define CONFIG_SKIP_LOWLEVEL_INIT
|
|
#define CONFIG_BOARD_EARLY_INIT_F 1
|
|
|
|
#ifndef CONFIG_SPL
|
|
#define CONFIG_FSL_DDR_INTERACTIVE /* Interactive debugging */
|
|
#endif
|
|
#ifndef CONFIG_SYS_FSL_DDR4
|
|
#define CONFIG_SYS_FSL_DDR3 /* Use DDR3 memory */
|
|
#define CONFIG_SYS_DDR_RAW_TIMING
|
|
#endif
|
|
|
|
#define CONFIG_SYS_FSL_DDR_INTLV_256B /* force 256 byte interleaving */
|
|
|
|
#define CONFIG_VERY_BIG_RAM
|
|
#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL
|
|
#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0
|
|
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
|
|
#define CONFIG_SYS_DDR_BLOCK2_BASE 0x8080000000ULL
|
|
#define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS 2
|
|
|
|
/*
|
|
* SMP Definitinos
|
|
*/
|
|
#define CPU_RELEASE_ADDR secondary_boot_func
|
|
|
|
#define CONFIG_SYS_FSL_OTHER_DDR_NUM_CTRLS
|
|
#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
|
|
#define CONFIG_SYS_DP_DDR_BASE 0x6000000000ULL
|
|
/*
|
|
* DDR controller use 0 as the base address for binding.
|
|
* It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access.
|
|
*/
|
|
#define CONFIG_SYS_DP_DDR_BASE_PHY 0
|
|
#define CONFIG_DP_DDR_CTRL 2
|
|
#define CONFIG_DP_DDR_NUM_CTRLS 1
|
|
#endif
|
|
|
|
/* Generic Timer Definitions */
|
|
/*
|
|
* This is not an accurate number. It is used in start.S. The frequency
|
|
* will be udpated later when get_bus_freq(0) is available.
|
|
*/
|
|
#define COUNTER_FREQUENCY 25000000 /* 25MHz */
|
|
|
|
/* Size of malloc() pool */
|
|
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2048 * 1024)
|
|
|
|
/* I2C */
|
|
#define CONFIG_SYS_I2C
|
|
#define CONFIG_SYS_I2C_MXC
|
|
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
|
|
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
|
|
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
|
|
#define CONFIG_SYS_I2C_MXC_I2C4 /* enable I2C bus 4 */
|
|
|
|
/* Serial Port */
|
|
#define CONFIG_CONS_INDEX 1
|
|
#define CONFIG_SYS_NS16550_SERIAL
|
|
#define CONFIG_SYS_NS16550_REG_SIZE 1
|
|
#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2)
|
|
|
|
#define CONFIG_BAUDRATE 115200
|
|
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
|
|
|
|
/* IFC */
|
|
#define CONFIG_FSL_IFC
|
|
|
|
/*
|
|
* During booting, IFC is mapped at the region of 0x30000000.
|
|
* But this region is limited to 256MB. To accommodate NOR, promjet
|
|
* and FPGA. This region is divided as below:
|
|
* 0x30000000 - 0x37ffffff : 128MB : NOR flash
|
|
* 0x38000000 - 0x3BFFFFFF : 64MB : Promjet
|
|
* 0x3C000000 - 0x40000000 : 64MB : FPGA etc
|
|
*
|
|
* To accommodate bigger NOR flash and other devices, we will map IFC
|
|
* chip selects to as below:
|
|
* 0x5_1000_0000..0x5_1fff_ffff Memory Hole
|
|
* 0x5_2000_0000..0x5_3fff_ffff IFC CSx (FPGA, NAND and others 512MB)
|
|
* 0x5_4000_0000..0x5_7fff_ffff ASIC or others 1GB
|
|
* 0x5_8000_0000..0x5_bfff_ffff IFC CS0 1GB (NOR/Promjet)
|
|
* 0x5_C000_0000..0x5_ffff_ffff IFC CS1 1GB (NOR/Promjet)
|
|
*
|
|
* For e.g. NOR flash at CS0 will be mapped to 0x580000000 after relocation.
|
|
* CONFIG_SYS_FLASH_BASE has the final address (core view)
|
|
* CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view)
|
|
* CONFIG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address
|
|
* CONFIG_SYS_TEXT_BASE is linked to 0x30000000 for booting
|
|
*/
|
|
|
|
#define CONFIG_SYS_FLASH_BASE 0x580000000ULL
|
|
#define CONFIG_SYS_FLASH_BASE_PHYS 0x80000000
|
|
#define CONFIG_SYS_FLASH_BASE_PHYS_EARLY 0x00000000
|
|
|
|
#define CONFIG_SYS_FLASH1_BASE_PHYS 0xC0000000
|
|
#define CONFIG_SYS_FLASH1_BASE_PHYS_EARLY 0x8000000
|
|
|
|
#ifndef __ASSEMBLY__
|
|
unsigned long long get_qixis_addr(void);
|
|
#endif
|
|
#define QIXIS_BASE get_qixis_addr()
|
|
#define QIXIS_BASE_PHYS 0x20000000
|
|
#define QIXIS_BASE_PHYS_EARLY 0xC000000
|
|
#define QIXIS_STAT_PRES1 0xb
|
|
#define QIXIS_SDID_MASK 0x07
|
|
#define QIXIS_ESDHC_NO_ADAPTER 0x7
|
|
|
|
#define CONFIG_SYS_NAND_BASE 0x530000000ULL
|
|
#define CONFIG_SYS_NAND_BASE_PHYS 0x30000000
|
|
|
|
/* Debug Server firmware */
|
|
#define CONFIG_FSL_DEBUG_SERVER
|
|
/* 2 sec timeout */
|
|
#define CONFIG_SYS_DEBUG_SERVER_TIMEOUT (2 * 1000 * 1000)
|
|
|
|
/* MC firmware */
|
|
#define CONFIG_FSL_MC_ENET
|
|
/* TODO Actual DPL max length needs to be confirmed with the MC FW team */
|
|
#define CONFIG_SYS_LS_MC_DPC_MAX_LENGTH 0x20000
|
|
#define CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET 0x00F00000
|
|
#define CONFIG_SYS_LS_MC_DPL_MAX_LENGTH 0x20000
|
|
#define CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET 0x00F20000
|
|
/* For LS2085A */
|
|
#define CONFIG_SYS_LS_MC_AIOP_IMG_MAX_LENGTH 0x200000
|
|
#define CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET 0x07000000
|
|
|
|
/*
|
|
* Carve out a DDR region which will not be used by u-boot/Linux
|
|
*
|
|
* It will be used by MC and Debug Server. The MC region must be
|
|
* 512MB aligned, so the min size to hide is 512MB.
|
|
*/
|
|
#if defined(CONFIG_FSL_MC_ENET) || defined(CONFIG_FSL_DEBUG_SERVER)
|
|
#define CONFIG_SYS_DEBUG_SERVER_DRAM_BLOCK_MIN_SIZE (254UL * 1024 * 1024)
|
|
#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (512UL * 1024 * 1024)
|
|
#define CONFIG_SYS_MC_RSV_MEM_ALIGN (512UL * 1024 * 1024)
|
|
#endif
|
|
|
|
/* PCIe */
|
|
#define CONFIG_PCIE1 /* PCIE controller 1 */
|
|
#define CONFIG_PCIE2 /* PCIE controller 2 */
|
|
#define CONFIG_PCIE3 /* PCIE controller 3 */
|
|
#define CONFIG_PCIE4 /* PCIE controller 4 */
|
|
#define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */
|
|
#ifdef CONFIG_LS2080A
|
|
#define FSL_PCIE_COMPAT "fsl,ls2080a-pcie"
|
|
#endif
|
|
|
|
#define CONFIG_SYS_PCI_64BIT
|
|
|
|
#define CONFIG_SYS_PCIE_CFG0_PHYS_OFF 0x00000000
|
|
#define CONFIG_SYS_PCIE_CFG0_SIZE 0x00001000 /* 4k */
|
|
#define CONFIG_SYS_PCIE_CFG1_PHYS_OFF 0x00001000
|
|
#define CONFIG_SYS_PCIE_CFG1_SIZE 0x00001000 /* 4k */
|
|
|
|
#define CONFIG_SYS_PCIE_IO_BUS 0x00000000
|
|
#define CONFIG_SYS_PCIE_IO_PHYS_OFF 0x00010000
|
|
#define CONFIG_SYS_PCIE_IO_SIZE 0x00010000 /* 64k */
|
|
|
|
#define CONFIG_SYS_PCIE_MEM_BUS 0x40000000
|
|
#define CONFIG_SYS_PCIE_MEM_PHYS_OFF 0x40000000
|
|
#define CONFIG_SYS_PCIE_MEM_SIZE 0x40000000 /* 1G */
|
|
|
|
/* Command line configuration */
|
|
#define CONFIG_CMD_ENV
|
|
|
|
/* Miscellaneous configurable options */
|
|
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
|
|
#define CONFIG_ARCH_EARLY_INIT_R
|
|
|
|
/* Physical Memory Map */
|
|
/* fixme: these need to be checked against the board */
|
|
#define CONFIG_CHIP_SELECTS_PER_CTRL 4
|
|
|
|
#define CONFIG_NR_DRAM_BANKS 3
|
|
|
|
#define CONFIG_HWCONFIG
|
|
#define HWCONFIG_BUFFER_SIZE 128
|
|
|
|
#define CONFIG_DISPLAY_CPUINFO
|
|
|
|
/* Allow to overwrite serial and ethaddr */
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
/* Initial environment variables */
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
|
|
"loadaddr=0x80100000\0" \
|
|
"kernel_addr=0x100000\0" \
|
|
"ramdisk_addr=0x800000\0" \
|
|
"ramdisk_size=0x2000000\0" \
|
|
"fdt_high=0xa0000000\0" \
|
|
"initrd_high=0xffffffffffffffff\0" \
|
|
"kernel_start=0x581200000\0" \
|
|
"kernel_load=0xa0000000\0" \
|
|
"kernel_size=0x2800000\0" \
|
|
"console=ttyAMA0,38400n8\0" \
|
|
"mcinitcmd=fsl_mc start mc 0x580300000" \
|
|
" 0x580800000 \0"
|
|
|
|
#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0 " \
|
|
"earlycon=uart8250,mmio,0x21c0500 " \
|
|
"ramdisk_size=0x2000000 default_hugepagesz=2m" \
|
|
" hugepagesz=2m hugepages=256"
|
|
#define CONFIG_BOOTCOMMAND "fsl_mc apply dpl 0x580700000 &&" \
|
|
" cp.b $kernel_start $kernel_load" \
|
|
" $kernel_size && bootm $kernel_load"
|
|
|
|
/* Monitor Command Prompt */
|
|
#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
|
|
sizeof(CONFIG_SYS_PROMPT) + 16)
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */
|
|
#define CONFIG_SYS_LONGHELP
|
|
#define CONFIG_CMDLINE_EDITING 1
|
|
#define CONFIG_AUTO_COMPLETE
|
|
#define CONFIG_SYS_MAXARGS 64 /* max command args */
|
|
|
|
#define CONFIG_PANIC_HANG /* do not reset board on panic */
|
|
|
|
#define CONFIG_SPL_BSS_START_ADDR 0x80100000
|
|
#define CONFIG_SPL_BSS_MAX_SIZE 0x00100000
|
|
#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
|
|
#define CONFIG_SPL_ENV_SUPPORT
|
|
#define CONFIG_SPL_FRAMEWORK
|
|
#define CONFIG_SPL_I2C_SUPPORT
|
|
#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"
|
|
#define CONFIG_SPL_LIBCOMMON_SUPPORT
|
|
#define CONFIG_SPL_LIBGENERIC_SUPPORT
|
|
#define CONFIG_SPL_MAX_SIZE 0x16000
|
|
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
|
|
#define CONFIG_SPL_NAND_SUPPORT
|
|
#define CONFIG_SPL_SERIAL_SUPPORT
|
|
#define CONFIG_SPL_STACK (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0)
|
|
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
|
|
#define CONFIG_SPL_TEXT_BASE 0x1800a000
|
|
|
|
#define CONFIG_SYS_NAND_U_BOOT_DST 0x80400000
|
|
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST
|
|
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000
|
|
#define CONFIG_SYS_SPL_MALLOC_START 0x80200000
|
|
#define CONFIG_SYS_MONITOR_LEN (640 * 1024)
|
|
|
|
#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
|
|
|
|
/* Hash command with SHA acceleration supported in hardware */
|
|
#ifdef CONFIG_FSL_CAAM
|
|
#define CONFIG_CMD_HASH
|
|
#define CONFIG_SHA_HW_ACCEL
|
|
#endif
|
|
|
|
#endif /* __LS2_COMMON_H */
|