forked from rrcarlosr/Jetpack
389 lines
9.6 KiB
C
389 lines
9.6 KiB
C
/*
|
|
* bf5xx-ac97.c -- AC97 support for the ADI blackfin chip.
|
|
*
|
|
* Author: Roy Huang
|
|
* Created: 11th. June 2007
|
|
* Copyright: Analog Device Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/wait.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <sound/core.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/ac97_codec.h>
|
|
#include <sound/initval.h>
|
|
#include <sound/soc.h>
|
|
|
|
#include <asm/irq.h>
|
|
#include <asm/portmux.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/gpio.h>
|
|
|
|
#include "bf5xx-sport.h"
|
|
#include "bf5xx-ac97.h"
|
|
|
|
/* Anomaly notes:
|
|
* 05000250 - AD1980 is running in TDM mode and RFS/TFS are generated by SPORT
|
|
* contrtoller. But, RFSDIV and TFSDIV are always set to 16*16-1,
|
|
* while the max AC97 data size is 13*16. The DIV is always larger
|
|
* than data size. AD73311 and ad2602 are not running in TDM mode.
|
|
* AD1836 and AD73322 depend on external RFS/TFS only. So, this
|
|
* anomaly does not affect blackfin sound drivers.
|
|
*/
|
|
|
|
static struct sport_device *ac97_sport_handle;
|
|
|
|
void bf5xx_pcm_to_ac97(struct ac97_frame *dst, const __u16 *src,
|
|
size_t count, unsigned int chan_mask)
|
|
{
|
|
while (count--) {
|
|
dst->ac97_tag = TAG_VALID;
|
|
if (chan_mask & SP_FL) {
|
|
dst->ac97_pcm_r = *src++;
|
|
dst->ac97_tag |= TAG_PCM_RIGHT;
|
|
}
|
|
if (chan_mask & SP_FR) {
|
|
dst->ac97_pcm_l = *src++;
|
|
dst->ac97_tag |= TAG_PCM_LEFT;
|
|
|
|
}
|
|
#if defined(CONFIG_SND_BF5XX_MULTICHAN_SUPPORT)
|
|
if (chan_mask & SP_SR) {
|
|
dst->ac97_sl = *src++;
|
|
dst->ac97_tag |= TAG_PCM_SL;
|
|
}
|
|
if (chan_mask & SP_SL) {
|
|
dst->ac97_sr = *src++;
|
|
dst->ac97_tag |= TAG_PCM_SR;
|
|
}
|
|
if (chan_mask & SP_LFE) {
|
|
dst->ac97_lfe = *src++;
|
|
dst->ac97_tag |= TAG_PCM_LFE;
|
|
}
|
|
if (chan_mask & SP_FC) {
|
|
dst->ac97_center = *src++;
|
|
dst->ac97_tag |= TAG_PCM_CENTER;
|
|
}
|
|
#endif
|
|
dst++;
|
|
}
|
|
}
|
|
EXPORT_SYMBOL(bf5xx_pcm_to_ac97);
|
|
|
|
void bf5xx_ac97_to_pcm(const struct ac97_frame *src, __u16 *dst,
|
|
size_t count)
|
|
{
|
|
while (count--) {
|
|
*(dst++) = src->ac97_pcm_l;
|
|
*(dst++) = src->ac97_pcm_r;
|
|
src++;
|
|
}
|
|
}
|
|
EXPORT_SYMBOL(bf5xx_ac97_to_pcm);
|
|
|
|
static unsigned int sport_tx_curr_frag(struct sport_device *sport)
|
|
{
|
|
return sport->tx_curr_frag = sport_curr_offset_tx(sport) /
|
|
sport->tx_fragsize;
|
|
}
|
|
|
|
static void enqueue_cmd(struct snd_ac97 *ac97, __u16 addr, __u16 data)
|
|
{
|
|
struct sport_device *sport = ac97_sport_handle;
|
|
int *cmd_count = sport->private_data;
|
|
int nextfrag = sport_tx_curr_frag(sport);
|
|
struct ac97_frame *nextwrite;
|
|
|
|
sport_incfrag(sport, &nextfrag, 1);
|
|
|
|
nextwrite = (struct ac97_frame *)(sport->tx_buf +
|
|
nextfrag * sport->tx_fragsize);
|
|
pr_debug("sport->tx_buf:%p, nextfrag:0x%x nextwrite:%p, cmd_count:%d\n",
|
|
sport->tx_buf, nextfrag, nextwrite, cmd_count[nextfrag]);
|
|
nextwrite[cmd_count[nextfrag]].ac97_tag |= TAG_CMD;
|
|
nextwrite[cmd_count[nextfrag]].ac97_addr = addr;
|
|
nextwrite[cmd_count[nextfrag]].ac97_data = data;
|
|
++cmd_count[nextfrag];
|
|
pr_debug("ac97_sport: Inserting %02x/%04x into fragment %d\n",
|
|
addr >> 8, data, nextfrag);
|
|
}
|
|
|
|
static unsigned short bf5xx_ac97_read(struct snd_ac97 *ac97,
|
|
unsigned short reg)
|
|
{
|
|
struct sport_device *sport_handle = ac97_sport_handle;
|
|
struct ac97_frame out_frame[2], in_frame[2];
|
|
|
|
pr_debug("%s enter 0x%x\n", __func__, reg);
|
|
|
|
/* When dma descriptor is enabled, the register should not be read */
|
|
if (sport_handle->tx_run || sport_handle->rx_run) {
|
|
pr_err("Could you send a mail to cliff.cai@analog.com "
|
|
"to report this?\n");
|
|
return -EFAULT;
|
|
}
|
|
|
|
memset(&out_frame, 0, 2 * sizeof(struct ac97_frame));
|
|
memset(&in_frame, 0, 2 * sizeof(struct ac97_frame));
|
|
out_frame[0].ac97_tag = TAG_VALID | TAG_CMD;
|
|
out_frame[0].ac97_addr = ((reg << 8) | 0x8000);
|
|
sport_send_and_recv(sport_handle, (unsigned char *)&out_frame,
|
|
(unsigned char *)&in_frame,
|
|
2 * sizeof(struct ac97_frame));
|
|
return in_frame[1].ac97_data;
|
|
}
|
|
|
|
void bf5xx_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
|
|
unsigned short val)
|
|
{
|
|
struct sport_device *sport_handle = ac97_sport_handle;
|
|
|
|
pr_debug("%s enter 0x%x:0x%04x\n", __func__, reg, val);
|
|
|
|
if (sport_handle->tx_run) {
|
|
enqueue_cmd(ac97, (reg << 8), val); /* write */
|
|
enqueue_cmd(ac97, (reg << 8) | 0x8000, 0); /* read back */
|
|
} else {
|
|
struct ac97_frame frame;
|
|
memset(&frame, 0, sizeof(struct ac97_frame));
|
|
frame.ac97_tag = TAG_VALID | TAG_CMD;
|
|
frame.ac97_addr = (reg << 8);
|
|
frame.ac97_data = val;
|
|
sport_send_and_recv(sport_handle, (unsigned char *)&frame, \
|
|
NULL, sizeof(struct ac97_frame));
|
|
}
|
|
}
|
|
|
|
static void bf5xx_ac97_warm_reset(struct snd_ac97 *ac97)
|
|
{
|
|
struct sport_device *sport_handle = ac97_sport_handle;
|
|
u16 gpio = P_IDENT(sport_handle->pin_req[3]);
|
|
|
|
pr_debug("%s enter\n", __func__);
|
|
|
|
peripheral_free_list(sport_handle->pin_req);
|
|
gpio_request(gpio, "bf5xx-ac97");
|
|
gpio_direction_output(gpio, 1);
|
|
udelay(2);
|
|
gpio_set_value(gpio, 0);
|
|
udelay(1);
|
|
gpio_free(gpio);
|
|
peripheral_request_list(sport_handle->pin_req, "soc-audio");
|
|
}
|
|
|
|
static void bf5xx_ac97_cold_reset(struct snd_ac97 *ac97)
|
|
{
|
|
#ifdef CONFIG_SND_BF5XX_HAVE_COLD_RESET
|
|
pr_debug("%s enter\n", __func__);
|
|
|
|
/* It is specified for bf548-ezkit */
|
|
gpio_set_value(CONFIG_SND_BF5XX_RESET_GPIO_NUM, 0);
|
|
/* Keep reset pin low for 1 ms */
|
|
mdelay(1);
|
|
gpio_set_value(CONFIG_SND_BF5XX_RESET_GPIO_NUM, 1);
|
|
/* Wait for bit clock recover */
|
|
mdelay(1);
|
|
#else
|
|
pr_info("%s: Not implemented\n", __func__);
|
|
#endif
|
|
}
|
|
|
|
static struct snd_ac97_bus_ops bf5xx_ac97_ops = {
|
|
.read = bf5xx_ac97_read,
|
|
.write = bf5xx_ac97_write,
|
|
.warm_reset = bf5xx_ac97_warm_reset,
|
|
.reset = bf5xx_ac97_cold_reset,
|
|
};
|
|
|
|
#ifdef CONFIG_PM
|
|
static int bf5xx_ac97_suspend(struct snd_soc_dai *dai)
|
|
{
|
|
struct sport_device *sport = snd_soc_dai_get_drvdata(dai);
|
|
|
|
pr_debug("%s : sport %d\n", __func__, dai->id);
|
|
if (!dai->active)
|
|
return 0;
|
|
if (dai->capture_active)
|
|
sport_rx_stop(sport);
|
|
if (dai->playback_active)
|
|
sport_tx_stop(sport);
|
|
return 0;
|
|
}
|
|
|
|
static int bf5xx_ac97_resume(struct snd_soc_dai *dai)
|
|
{
|
|
int ret;
|
|
struct sport_device *sport = snd_soc_dai_get_drvdata(dai);
|
|
|
|
pr_debug("%s : sport %d\n", __func__, dai->id);
|
|
if (!dai->active)
|
|
return 0;
|
|
|
|
#if defined(CONFIG_SND_BF5XX_MULTICHAN_SUPPORT)
|
|
ret = sport_set_multichannel(sport, 16, 0x3FF, 0x3FF, 1);
|
|
#else
|
|
ret = sport_set_multichannel(sport, 16, 0x1F, 0x1F, 1);
|
|
#endif
|
|
if (ret) {
|
|
pr_err("SPORT is busy!\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
ret = sport_config_rx(sport, IRFS, 0xF, 0, (16*16-1));
|
|
if (ret) {
|
|
pr_err("SPORT is busy!\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
ret = sport_config_tx(sport, ITFS, 0xF, 0, (16*16-1));
|
|
if (ret) {
|
|
pr_err("SPORT is busy!\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#else
|
|
#define bf5xx_ac97_suspend NULL
|
|
#define bf5xx_ac97_resume NULL
|
|
#endif
|
|
|
|
static struct snd_soc_dai_driver bfin_ac97_dai = {
|
|
.bus_control = true,
|
|
.suspend = bf5xx_ac97_suspend,
|
|
.resume = bf5xx_ac97_resume,
|
|
.playback = {
|
|
.stream_name = "AC97 Playback",
|
|
.channels_min = 2,
|
|
#if defined(CONFIG_SND_BF5XX_MULTICHAN_SUPPORT)
|
|
.channels_max = 6,
|
|
#else
|
|
.channels_max = 2,
|
|
#endif
|
|
.rates = SNDRV_PCM_RATE_48000,
|
|
.formats = SNDRV_PCM_FMTBIT_S16_LE, },
|
|
.capture = {
|
|
.stream_name = "AC97 Capture",
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
.rates = SNDRV_PCM_RATE_48000,
|
|
.formats = SNDRV_PCM_FMTBIT_S16_LE, },
|
|
};
|
|
|
|
static const struct snd_soc_component_driver bfin_ac97_component = {
|
|
.name = "bfin-ac97",
|
|
};
|
|
|
|
static int asoc_bfin_ac97_probe(struct platform_device *pdev)
|
|
{
|
|
struct sport_device *sport_handle;
|
|
int ret;
|
|
|
|
#ifdef CONFIG_SND_BF5XX_HAVE_COLD_RESET
|
|
/* Request PB3 as reset pin */
|
|
ret = devm_gpio_request_one(&pdev->dev,
|
|
CONFIG_SND_BF5XX_RESET_GPIO_NUM,
|
|
GPIOF_OUT_INIT_HIGH, "SND_AD198x RESET");
|
|
if (ret) {
|
|
dev_err(&pdev->dev,
|
|
"Failed to request GPIO_%d for reset: %d\n",
|
|
CONFIG_SND_BF5XX_RESET_GPIO_NUM, ret);
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
sport_handle = sport_init(pdev, 2, sizeof(struct ac97_frame),
|
|
PAGE_SIZE);
|
|
if (!sport_handle) {
|
|
ret = -ENODEV;
|
|
goto sport_err;
|
|
}
|
|
|
|
/*SPORT works in TDM mode to simulate AC97 transfers*/
|
|
#if defined(CONFIG_SND_BF5XX_MULTICHAN_SUPPORT)
|
|
ret = sport_set_multichannel(sport_handle, 16, 0x3FF, 0x3FF, 1);
|
|
#else
|
|
ret = sport_set_multichannel(sport_handle, 16, 0x1F, 0x1F, 1);
|
|
#endif
|
|
if (ret) {
|
|
pr_err("SPORT is busy!\n");
|
|
ret = -EBUSY;
|
|
goto sport_config_err;
|
|
}
|
|
|
|
ret = sport_config_rx(sport_handle, IRFS, 0xF, 0, (16*16-1));
|
|
if (ret) {
|
|
pr_err("SPORT is busy!\n");
|
|
ret = -EBUSY;
|
|
goto sport_config_err;
|
|
}
|
|
|
|
ret = sport_config_tx(sport_handle, ITFS, 0xF, 0, (16*16-1));
|
|
if (ret) {
|
|
pr_err("SPORT is busy!\n");
|
|
ret = -EBUSY;
|
|
goto sport_config_err;
|
|
}
|
|
|
|
ret = snd_soc_set_ac97_ops(&bf5xx_ac97_ops);
|
|
if (ret != 0) {
|
|
dev_err(&pdev->dev, "Failed to set AC'97 ops: %d\n", ret);
|
|
goto sport_config_err;
|
|
}
|
|
|
|
ret = snd_soc_register_component(&pdev->dev, &bfin_ac97_component,
|
|
&bfin_ac97_dai, 1);
|
|
if (ret) {
|
|
pr_err("Failed to register DAI: %d\n", ret);
|
|
goto sport_config_err;
|
|
}
|
|
|
|
ac97_sport_handle = sport_handle;
|
|
|
|
return 0;
|
|
|
|
sport_config_err:
|
|
sport_done(sport_handle);
|
|
sport_err:
|
|
snd_soc_set_ac97_ops(NULL);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int asoc_bfin_ac97_remove(struct platform_device *pdev)
|
|
{
|
|
struct sport_device *sport_handle = platform_get_drvdata(pdev);
|
|
|
|
snd_soc_unregister_component(&pdev->dev);
|
|
sport_done(sport_handle);
|
|
snd_soc_set_ac97_ops(NULL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver asoc_bfin_ac97_driver = {
|
|
.driver = {
|
|
.name = "bfin-ac97",
|
|
},
|
|
|
|
.probe = asoc_bfin_ac97_probe,
|
|
.remove = asoc_bfin_ac97_remove,
|
|
};
|
|
|
|
module_platform_driver(asoc_bfin_ac97_driver);
|
|
|
|
MODULE_AUTHOR("Roy Huang");
|
|
MODULE_DESCRIPTION("AC97 driver for ADI Blackfin");
|
|
MODULE_LICENSE("GPL");
|