forked from rrcarlosr/Jetpack
187 lines
8.8 KiB
Plaintext
187 lines
8.8 KiB
Plaintext
Overview
|
|
========
|
|
|
|
Page Table Isolation (pti, previously known as KAISER[1]) is a
|
|
countermeasure against attacks on the shared user/kernel address
|
|
space such as the "Meltdown" approach[2].
|
|
|
|
To mitigate this class of attacks, we create an independent set of
|
|
page tables for use only when running userspace applications. When
|
|
the kernel is entered via syscalls, interrupts or exceptions, the
|
|
page tables are switched to the full "kernel" copy. When the system
|
|
switches back to user mode, the user copy is used again.
|
|
|
|
The userspace page tables contain only a minimal amount of kernel
|
|
data: only what is needed to enter/exit the kernel such as the
|
|
entry/exit functions themselves and the interrupt descriptor table
|
|
(IDT). There are a few strictly unnecessary things that get mapped
|
|
such as the first C function when entering an interrupt (see
|
|
comments in pti.c).
|
|
|
|
This approach helps to ensure that side-channel attacks leveraging
|
|
the paging structures do not function when PTI is enabled. It can be
|
|
enabled by setting CONFIG_PAGE_TABLE_ISOLATION=y at compile time.
|
|
Once enabled at compile-time, it can be disabled at boot with the
|
|
'nopti' or 'pti=' kernel parameters (see kernel-parameters.txt).
|
|
|
|
Page Table Management
|
|
=====================
|
|
|
|
When PTI is enabled, the kernel manages two sets of page tables.
|
|
The first set is very similar to the single set which is present in
|
|
kernels without PTI. This includes a complete mapping of userspace
|
|
that the kernel can use for things like copy_to_user().
|
|
|
|
Although _complete_, the user portion of the kernel page tables is
|
|
crippled by setting the NX bit in the top level. This ensures
|
|
that any missed kernel->user CR3 switch will immediately crash
|
|
userspace upon executing its first instruction.
|
|
|
|
The userspace page tables map only the kernel data needed to enter
|
|
and exit the kernel. This data is entirely contained in the 'struct
|
|
cpu_entry_area' structure which is placed in the fixmap which gives
|
|
each CPU's copy of the area a compile-time-fixed virtual address.
|
|
|
|
For new userspace mappings, the kernel makes the entries in its
|
|
page tables like normal. The only difference is when the kernel
|
|
makes entries in the top (PGD) level. In addition to setting the
|
|
entry in the main kernel PGD, a copy of the entry is made in the
|
|
userspace page tables' PGD.
|
|
|
|
This sharing at the PGD level also inherently shares all the lower
|
|
layers of the page tables. This leaves a single, shared set of
|
|
userspace page tables to manage. One PTE to lock, one set of
|
|
accessed bits, dirty bits, etc...
|
|
|
|
Overhead
|
|
========
|
|
|
|
Protection against side-channel attacks is important. But,
|
|
this protection comes at a cost:
|
|
|
|
1. Increased Memory Use
|
|
a. Each process now needs an order-1 PGD instead of order-0.
|
|
(Consumes an additional 4k per process).
|
|
b. The 'cpu_entry_area' structure must be 2MB in size and 2MB
|
|
aligned so that it can be mapped by setting a single PMD
|
|
entry. This consumes nearly 2MB of RAM once the kernel
|
|
is decompressed, but no space in the kernel image itself.
|
|
|
|
2. Runtime Cost
|
|
a. CR3 manipulation to switch between the page table copies
|
|
must be done at interrupt, syscall, and exception entry
|
|
and exit (it can be skipped when the kernel is interrupted,
|
|
though.) Moves to CR3 are on the order of a hundred
|
|
cycles, and are required at every entry and exit.
|
|
b. A "trampoline" must be used for SYSCALL entry. This
|
|
trampoline depends on a smaller set of resources than the
|
|
non-PTI SYSCALL entry code, so requires mapping fewer
|
|
things into the userspace page tables. The downside is
|
|
that stacks must be switched at entry time.
|
|
c. Global pages are disabled for all kernel structures not
|
|
mapped into both kernel and userspace page tables. This
|
|
feature of the MMU allows different processes to share TLB
|
|
entries mapping the kernel. Losing the feature means more
|
|
TLB misses after a context switch. The actual loss of
|
|
performance is very small, however, never exceeding 1%.
|
|
d. Process Context IDentifiers (PCID) is a CPU feature that
|
|
allows us to skip flushing the entire TLB when switching page
|
|
tables by setting a special bit in CR3 when the page tables
|
|
are changed. This makes switching the page tables (at context
|
|
switch, or kernel entry/exit) cheaper. But, on systems with
|
|
PCID support, the context switch code must flush both the user
|
|
and kernel entries out of the TLB. The user PCID TLB flush is
|
|
deferred until the exit to userspace, minimizing the cost.
|
|
See intel.com/sdm for the gory PCID/INVPCID details.
|
|
e. The userspace page tables must be populated for each new
|
|
process. Even without PTI, the shared kernel mappings
|
|
are created by copying top-level (PGD) entries into each
|
|
new process. But, with PTI, there are now *two* kernel
|
|
mappings: one in the kernel page tables that maps everything
|
|
and one for the entry/exit structures. At fork(), we need to
|
|
copy both.
|
|
f. In addition to the fork()-time copying, there must also
|
|
be an update to the userspace PGD any time a set_pgd() is done
|
|
on a PGD used to map userspace. This ensures that the kernel
|
|
and userspace copies always map the same userspace
|
|
memory.
|
|
g. On systems without PCID support, each CR3 write flushes
|
|
the entire TLB. That means that each syscall, interrupt
|
|
or exception flushes the TLB.
|
|
h. INVPCID is a TLB-flushing instruction which allows flushing
|
|
of TLB entries for non-current PCIDs. Some systems support
|
|
PCIDs, but do not support INVPCID. On these systems, addresses
|
|
can only be flushed from the TLB for the current PCID. When
|
|
flushing a kernel address, we need to flush all PCIDs, so a
|
|
single kernel address flush will require a TLB-flushing CR3
|
|
write upon the next use of every PCID.
|
|
|
|
Possible Future Work
|
|
====================
|
|
1. We can be more careful about not actually writing to CR3
|
|
unless its value is actually changed.
|
|
2. Allow PTI to be enabled/disabled at runtime in addition to the
|
|
boot-time switching.
|
|
|
|
Testing
|
|
========
|
|
|
|
To test stability of PTI, the following test procedure is recommended,
|
|
ideally doing all of these in parallel:
|
|
|
|
1. Set CONFIG_DEBUG_ENTRY=y
|
|
2. Run several copies of all of the tools/testing/selftests/x86/ tests
|
|
(excluding MPX and protection_keys) in a loop on multiple CPUs for
|
|
several minutes. These tests frequently uncover corner cases in the
|
|
kernel entry code. In general, old kernels might cause these tests
|
|
themselves to crash, but they should never crash the kernel.
|
|
3. Run the 'perf' tool in a mode (top or record) that generates many
|
|
frequent performance monitoring non-maskable interrupts (see "NMI"
|
|
in /proc/interrupts). This exercises the NMI entry/exit code which
|
|
is known to trigger bugs in code paths that did not expect to be
|
|
interrupted, including nested NMIs. Using "-c" boosts the rate of
|
|
NMIs, and using two -c with separate counters encourages nested NMIs
|
|
and less deterministic behavior.
|
|
|
|
while true; do perf record -c 10000 -e instructions,cycles -a sleep 10; done
|
|
|
|
4. Launch a KVM virtual machine.
|
|
5. Run 32-bit binaries on systems supporting the SYSCALL instruction.
|
|
This has been a lightly-tested code path and needs extra scrutiny.
|
|
|
|
Debugging
|
|
=========
|
|
|
|
Bugs in PTI cause a few different signatures of crashes
|
|
that are worth noting here.
|
|
|
|
* Failures of the selftests/x86 code. Usually a bug in one of the
|
|
more obscure corners of entry_64.S
|
|
* Crashes in early boot, especially around CPU bringup. Bugs
|
|
in the trampoline code or mappings cause these.
|
|
* Crashes at the first interrupt. Caused by bugs in entry_64.S,
|
|
like screwing up a page table switch. Also caused by
|
|
incorrectly mapping the IRQ handler entry code.
|
|
* Crashes at the first NMI. The NMI code is separate from main
|
|
interrupt handlers and can have bugs that do not affect
|
|
normal interrupts. Also caused by incorrectly mapping NMI
|
|
code. NMIs that interrupt the entry code must be very
|
|
careful and can be the cause of crashes that show up when
|
|
running perf.
|
|
* Kernel crashes at the first exit to userspace. entry_64.S
|
|
bugs, or failing to map some of the exit code.
|
|
* Crashes at first interrupt that interrupts userspace. The paths
|
|
in entry_64.S that return to userspace are sometimes separate
|
|
from the ones that return to the kernel.
|
|
* Double faults: overflowing the kernel stack because of page
|
|
faults upon page faults. Caused by touching non-pti-mapped
|
|
data in the entry code, or forgetting to switch to kernel
|
|
CR3 before calling into C functions which are not pti-mapped.
|
|
* Userspace segfaults early in boot, sometimes manifesting
|
|
as mount(8) failing to mount the rootfs. These have
|
|
tended to be TLB invalidation issues. Usually invalidating
|
|
the wrong PCID, or otherwise missing an invalidation.
|
|
|
|
1. https://gruss.cc/files/kaiser.pdf
|
|
2. https://meltdownattack.com/meltdown.pdf
|