forked from rrcarlosr/Jetpack
517 lines
22 KiB
Plaintext
517 lines
22 KiB
Plaintext
= Transparent Hugepage Support =
|
|
|
|
== Objective ==
|
|
|
|
Performance critical computing applications dealing with large memory
|
|
working sets are already running on top of libhugetlbfs and in turn
|
|
hugetlbfs. Transparent Hugepage Support is an alternative means of
|
|
using huge pages for the backing of virtual memory with huge pages
|
|
that supports the automatic promotion and demotion of page sizes and
|
|
without the shortcomings of hugetlbfs.
|
|
|
|
Currently it only works for anonymous memory mappings and tmpfs/shmem.
|
|
But in the future it can expand to other filesystems.
|
|
|
|
The reason applications are running faster is because of two
|
|
factors. The first factor is almost completely irrelevant and it's not
|
|
of significant interest because it'll also have the downside of
|
|
requiring larger clear-page copy-page in page faults which is a
|
|
potentially negative effect. The first factor consists in taking a
|
|
single page fault for each 2M virtual region touched by userland (so
|
|
reducing the enter/exit kernel frequency by a 512 times factor). This
|
|
only matters the first time the memory is accessed for the lifetime of
|
|
a memory mapping. The second long lasting and much more important
|
|
factor will affect all subsequent accesses to the memory for the whole
|
|
runtime of the application. The second factor consist of two
|
|
components: 1) the TLB miss will run faster (especially with
|
|
virtualization using nested pagetables but almost always also on bare
|
|
metal without virtualization) and 2) a single TLB entry will be
|
|
mapping a much larger amount of virtual memory in turn reducing the
|
|
number of TLB misses. With virtualization and nested pagetables the
|
|
TLB can be mapped of larger size only if both KVM and the Linux guest
|
|
are using hugepages but a significant speedup already happens if only
|
|
one of the two is using hugepages just because of the fact the TLB
|
|
miss is going to run faster.
|
|
|
|
== Design ==
|
|
|
|
- "graceful fallback": mm components which don't have transparent hugepage
|
|
knowledge fall back to breaking huge pmd mapping into table of ptes and,
|
|
if necessary, split a transparent hugepage. Therefore these components
|
|
can continue working on the regular pages or regular pte mappings.
|
|
|
|
- if a hugepage allocation fails because of memory fragmentation,
|
|
regular pages should be gracefully allocated instead and mixed in
|
|
the same vma without any failure or significant delay and without
|
|
userland noticing
|
|
|
|
- if some task quits and more hugepages become available (either
|
|
immediately in the buddy or through the VM), guest physical memory
|
|
backed by regular pages should be relocated on hugepages
|
|
automatically (with khugepaged)
|
|
|
|
- it doesn't require memory reservation and in turn it uses hugepages
|
|
whenever possible (the only possible reservation here is kernelcore=
|
|
to avoid unmovable pages to fragment all the memory but such a tweak
|
|
is not specific to transparent hugepage support and it's a generic
|
|
feature that applies to all dynamic high order allocations in the
|
|
kernel)
|
|
|
|
Transparent Hugepage Support maximizes the usefulness of free memory
|
|
if compared to the reservation approach of hugetlbfs by allowing all
|
|
unused memory to be used as cache or other movable (or even unmovable
|
|
entities). It doesn't require reservation to prevent hugepage
|
|
allocation failures to be noticeable from userland. It allows paging
|
|
and all other advanced VM features to be available on the
|
|
hugepages. It requires no modifications for applications to take
|
|
advantage of it.
|
|
|
|
Applications however can be further optimized to take advantage of
|
|
this feature, like for example they've been optimized before to avoid
|
|
a flood of mmap system calls for every malloc(4k). Optimizing userland
|
|
is by far not mandatory and khugepaged already can take care of long
|
|
lived page allocations even for hugepage unaware applications that
|
|
deals with large amounts of memory.
|
|
|
|
In certain cases when hugepages are enabled system wide, application
|
|
may end up allocating more memory resources. An application may mmap a
|
|
large region but only touch 1 byte of it, in that case a 2M page might
|
|
be allocated instead of a 4k page for no good. This is why it's
|
|
possible to disable hugepages system-wide and to only have them inside
|
|
MADV_HUGEPAGE madvise regions.
|
|
|
|
Embedded systems should enable hugepages only inside madvise regions
|
|
to eliminate any risk of wasting any precious byte of memory and to
|
|
only run faster.
|
|
|
|
Applications that gets a lot of benefit from hugepages and that don't
|
|
risk to lose memory by using hugepages, should use
|
|
madvise(MADV_HUGEPAGE) on their critical mmapped regions.
|
|
|
|
== sysfs ==
|
|
|
|
Transparent Hugepage Support for anonymous memory can be entirely disabled
|
|
(mostly for debugging purposes) or only enabled inside MADV_HUGEPAGE
|
|
regions (to avoid the risk of consuming more memory resources) or enabled
|
|
system wide. This can be achieved with one of:
|
|
|
|
echo always >/sys/kernel/mm/transparent_hugepage/enabled
|
|
echo madvise >/sys/kernel/mm/transparent_hugepage/enabled
|
|
echo never >/sys/kernel/mm/transparent_hugepage/enabled
|
|
|
|
It's also possible to limit defrag efforts in the VM to generate
|
|
anonymous hugepages in case they're not immediately free to madvise
|
|
regions or to never try to defrag memory and simply fallback to regular
|
|
pages unless hugepages are immediately available. Clearly if we spend CPU
|
|
time to defrag memory, we would expect to gain even more by the fact we
|
|
use hugepages later instead of regular pages. This isn't always
|
|
guaranteed, but it may be more likely in case the allocation is for a
|
|
MADV_HUGEPAGE region.
|
|
|
|
echo always >/sys/kernel/mm/transparent_hugepage/defrag
|
|
echo defer >/sys/kernel/mm/transparent_hugepage/defrag
|
|
echo madvise >/sys/kernel/mm/transparent_hugepage/defrag
|
|
echo never >/sys/kernel/mm/transparent_hugepage/defrag
|
|
|
|
"always" means that an application requesting THP will stall on allocation
|
|
failure and directly reclaim pages and compact memory in an effort to
|
|
allocate a THP immediately. This may be desirable for virtual machines
|
|
that benefit heavily from THP use and are willing to delay the VM start
|
|
to utilise them.
|
|
|
|
"defer" means that an application will wake kswapd in the background
|
|
to reclaim pages and wake kcompact to compact memory so that THP is
|
|
available in the near future. It's the responsibility of khugepaged
|
|
to then install the THP pages later.
|
|
|
|
"madvise" will enter direct reclaim like "always" but only for regions
|
|
that are have used madvise(MADV_HUGEPAGE). This is the default behaviour.
|
|
|
|
"never" should be self-explanatory.
|
|
|
|
By default kernel tries to use huge zero page on read page fault to
|
|
anonymous mapping. It's possible to disable huge zero page by writing 0
|
|
or enable it back by writing 1:
|
|
|
|
echo 0 >/sys/kernel/mm/transparent_hugepage/use_zero_page
|
|
echo 1 >/sys/kernel/mm/transparent_hugepage/use_zero_page
|
|
|
|
khugepaged will be automatically started when
|
|
transparent_hugepage/enabled is set to "always" or "madvise, and it'll
|
|
be automatically shutdown if it's set to "never".
|
|
|
|
khugepaged runs usually at low frequency so while one may not want to
|
|
invoke defrag algorithms synchronously during the page faults, it
|
|
should be worth invoking defrag at least in khugepaged. However it's
|
|
also possible to disable defrag in khugepaged by writing 0 or enable
|
|
defrag in khugepaged by writing 1:
|
|
|
|
echo 0 >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag
|
|
echo 1 >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag
|
|
|
|
You can also control how many pages khugepaged should scan at each
|
|
pass:
|
|
|
|
/sys/kernel/mm/transparent_hugepage/khugepaged/pages_to_scan
|
|
|
|
and how many milliseconds to wait in khugepaged between each pass (you
|
|
can set this to 0 to run khugepaged at 100% utilization of one core):
|
|
|
|
/sys/kernel/mm/transparent_hugepage/khugepaged/scan_sleep_millisecs
|
|
|
|
and how many milliseconds to wait in khugepaged if there's an hugepage
|
|
allocation failure to throttle the next allocation attempt.
|
|
|
|
/sys/kernel/mm/transparent_hugepage/khugepaged/alloc_sleep_millisecs
|
|
|
|
The khugepaged progress can be seen in the number of pages collapsed:
|
|
|
|
/sys/kernel/mm/transparent_hugepage/khugepaged/pages_collapsed
|
|
|
|
for each pass:
|
|
|
|
/sys/kernel/mm/transparent_hugepage/khugepaged/full_scans
|
|
|
|
max_ptes_none specifies how many extra small pages (that are
|
|
not already mapped) can be allocated when collapsing a group
|
|
of small pages into one large page.
|
|
|
|
/sys/kernel/mm/transparent_hugepage/khugepaged/max_ptes_none
|
|
|
|
A higher value leads to use additional memory for programs.
|
|
A lower value leads to gain less thp performance. Value of
|
|
max_ptes_none can waste cpu time very little, you can
|
|
ignore it.
|
|
|
|
max_ptes_swap specifies how many pages can be brought in from
|
|
swap when collapsing a group of pages into a transparent huge page.
|
|
|
|
/sys/kernel/mm/transparent_hugepage/khugepaged/max_ptes_swap
|
|
|
|
A higher value can cause excessive swap IO and waste
|
|
memory. A lower value can prevent THPs from being
|
|
collapsed, resulting fewer pages being collapsed into
|
|
THPs, and lower memory access performance.
|
|
|
|
== Boot parameter ==
|
|
|
|
You can change the sysfs boot time defaults of Transparent Hugepage
|
|
Support by passing the parameter "transparent_hugepage=always" or
|
|
"transparent_hugepage=madvise" or "transparent_hugepage=never"
|
|
(without "") to the kernel command line.
|
|
|
|
== Hugepages in tmpfs/shmem ==
|
|
|
|
You can control hugepage allocation policy in tmpfs with mount option
|
|
"huge=". It can have following values:
|
|
|
|
- "always":
|
|
Attempt to allocate huge pages every time we need a new page;
|
|
|
|
- "never":
|
|
Do not allocate huge pages;
|
|
|
|
- "within_size":
|
|
Only allocate huge page if it will be fully within i_size.
|
|
Also respect fadvise()/madvise() hints;
|
|
|
|
- "advise:
|
|
Only allocate huge pages if requested with fadvise()/madvise();
|
|
|
|
The default policy is "never".
|
|
|
|
"mount -o remount,huge= /mountpoint" works fine after mount: remounting
|
|
huge=never will not attempt to break up huge pages at all, just stop more
|
|
from being allocated.
|
|
|
|
There's also sysfs knob to control hugepage allocation policy for internal
|
|
shmem mount: /sys/kernel/mm/transparent_hugepage/shmem_enabled. The mount
|
|
is used for SysV SHM, memfds, shared anonymous mmaps (of /dev/zero or
|
|
MAP_ANONYMOUS), GPU drivers' DRM objects, Ashmem.
|
|
|
|
In addition to policies listed above, shmem_enabled allows two further
|
|
values:
|
|
|
|
- "deny":
|
|
For use in emergencies, to force the huge option off from
|
|
all mounts;
|
|
- "force":
|
|
Force the huge option on for all - very useful for testing;
|
|
|
|
== Need of application restart ==
|
|
|
|
The transparent_hugepage/enabled values and tmpfs mount option only affect
|
|
future behavior. So to make them effective you need to restart any
|
|
application that could have been using hugepages. This also applies to the
|
|
regions registered in khugepaged.
|
|
|
|
== Monitoring usage ==
|
|
|
|
The number of anonymous transparent huge pages currently used by the
|
|
system is available by reading the AnonHugePages field in /proc/meminfo.
|
|
To identify what applications are using anonymous transparent huge pages,
|
|
it is necessary to read /proc/PID/smaps and count the AnonHugePages fields
|
|
for each mapping.
|
|
|
|
The number of file transparent huge pages mapped to userspace is available
|
|
by reading ShmemPmdMapped and ShmemHugePages fields in /proc/meminfo.
|
|
To identify what applications are mapping file transparent huge pages, it
|
|
is necessary to read /proc/PID/smaps and count the FileHugeMapped fields
|
|
for each mapping.
|
|
|
|
Note that reading the smaps file is expensive and reading it
|
|
frequently will incur overhead.
|
|
|
|
There are a number of counters in /proc/vmstat that may be used to
|
|
monitor how successfully the system is providing huge pages for use.
|
|
|
|
thp_fault_alloc is incremented every time a huge page is successfully
|
|
allocated to handle a page fault. This applies to both the
|
|
first time a page is faulted and for COW faults.
|
|
|
|
thp_collapse_alloc is incremented by khugepaged when it has found
|
|
a range of pages to collapse into one huge page and has
|
|
successfully allocated a new huge page to store the data.
|
|
|
|
thp_fault_fallback is incremented if a page fault fails to allocate
|
|
a huge page and instead falls back to using small pages.
|
|
|
|
thp_collapse_alloc_failed is incremented if khugepaged found a range
|
|
of pages that should be collapsed into one huge page but failed
|
|
the allocation.
|
|
|
|
thp_file_alloc is incremented every time a file huge page is successfully
|
|
i allocated.
|
|
|
|
thp_file_mapped is incremented every time a file huge page is mapped into
|
|
user address space.
|
|
|
|
thp_split_page is incremented every time a huge page is split into base
|
|
pages. This can happen for a variety of reasons but a common
|
|
reason is that a huge page is old and is being reclaimed.
|
|
This action implies splitting all PMD the page mapped with.
|
|
|
|
thp_split_page_failed is is incremented if kernel fails to split huge
|
|
page. This can happen if the page was pinned by somebody.
|
|
|
|
thp_deferred_split_page is incremented when a huge page is put onto split
|
|
queue. This happens when a huge page is partially unmapped and
|
|
splitting it would free up some memory. Pages on split queue are
|
|
going to be split under memory pressure.
|
|
|
|
thp_split_pmd is incremented every time a PMD split into table of PTEs.
|
|
This can happen, for instance, when application calls mprotect() or
|
|
munmap() on part of huge page. It doesn't split huge page, only
|
|
page table entry.
|
|
|
|
thp_zero_page_alloc is incremented every time a huge zero page is
|
|
successfully allocated. It includes allocations which where
|
|
dropped due race with other allocation. Note, it doesn't count
|
|
every map of the huge zero page, only its allocation.
|
|
|
|
thp_zero_page_alloc_failed is incremented if kernel fails to allocate
|
|
huge zero page and falls back to using small pages.
|
|
|
|
As the system ages, allocating huge pages may be expensive as the
|
|
system uses memory compaction to copy data around memory to free a
|
|
huge page for use. There are some counters in /proc/vmstat to help
|
|
monitor this overhead.
|
|
|
|
compact_stall is incremented every time a process stalls to run
|
|
memory compaction so that a huge page is free for use.
|
|
|
|
compact_success is incremented if the system compacted memory and
|
|
freed a huge page for use.
|
|
|
|
compact_fail is incremented if the system tries to compact memory
|
|
but failed.
|
|
|
|
compact_pages_moved is incremented each time a page is moved. If
|
|
this value is increasing rapidly, it implies that the system
|
|
is copying a lot of data to satisfy the huge page allocation.
|
|
It is possible that the cost of copying exceeds any savings
|
|
from reduced TLB misses.
|
|
|
|
compact_pagemigrate_failed is incremented when the underlying mechanism
|
|
for moving a page failed.
|
|
|
|
compact_blocks_moved is incremented each time memory compaction examines
|
|
a huge page aligned range of pages.
|
|
|
|
It is possible to establish how long the stalls were using the function
|
|
tracer to record how long was spent in __alloc_pages_nodemask and
|
|
using the mm_page_alloc tracepoint to identify which allocations were
|
|
for huge pages.
|
|
|
|
== get_user_pages and follow_page ==
|
|
|
|
get_user_pages and follow_page if run on a hugepage, will return the
|
|
head or tail pages as usual (exactly as they would do on
|
|
hugetlbfs). Most gup users will only care about the actual physical
|
|
address of the page and its temporary pinning to release after the I/O
|
|
is complete, so they won't ever notice the fact the page is huge. But
|
|
if any driver is going to mangle over the page structure of the tail
|
|
page (like for checking page->mapping or other bits that are relevant
|
|
for the head page and not the tail page), it should be updated to jump
|
|
to check head page instead. Taking reference on any head/tail page would
|
|
prevent page from being split by anyone.
|
|
|
|
NOTE: these aren't new constraints to the GUP API, and they match the
|
|
same constrains that applies to hugetlbfs too, so any driver capable
|
|
of handling GUP on hugetlbfs will also work fine on transparent
|
|
hugepage backed mappings.
|
|
|
|
In case you can't handle compound pages if they're returned by
|
|
follow_page, the FOLL_SPLIT bit can be specified as parameter to
|
|
follow_page, so that it will split the hugepages before returning
|
|
them. Migration for example passes FOLL_SPLIT as parameter to
|
|
follow_page because it's not hugepage aware and in fact it can't work
|
|
at all on hugetlbfs (but it instead works fine on transparent
|
|
hugepages thanks to FOLL_SPLIT). migration simply can't deal with
|
|
hugepages being returned (as it's not only checking the pfn of the
|
|
page and pinning it during the copy but it pretends to migrate the
|
|
memory in regular page sizes and with regular pte/pmd mappings).
|
|
|
|
== Optimizing the applications ==
|
|
|
|
To be guaranteed that the kernel will map a 2M page immediately in any
|
|
memory region, the mmap region has to be hugepage naturally
|
|
aligned. posix_memalign() can provide that guarantee.
|
|
|
|
== Hugetlbfs ==
|
|
|
|
You can use hugetlbfs on a kernel that has transparent hugepage
|
|
support enabled just fine as always. No difference can be noted in
|
|
hugetlbfs other than there will be less overall fragmentation. All
|
|
usual features belonging to hugetlbfs are preserved and
|
|
unaffected. libhugetlbfs will also work fine as usual.
|
|
|
|
== Graceful fallback ==
|
|
|
|
Code walking pagetables but unaware about huge pmds can simply call
|
|
split_huge_pmd(vma, pmd, addr) where the pmd is the one returned by
|
|
pmd_offset. It's trivial to make the code transparent hugepage aware
|
|
by just grepping for "pmd_offset" and adding split_huge_pmd where
|
|
missing after pmd_offset returns the pmd. Thanks to the graceful
|
|
fallback design, with a one liner change, you can avoid to write
|
|
hundred if not thousand of lines of complex code to make your code
|
|
hugepage aware.
|
|
|
|
If you're not walking pagetables but you run into a physical hugepage
|
|
but you can't handle it natively in your code, you can split it by
|
|
calling split_huge_page(page). This is what the Linux VM does before
|
|
it tries to swapout the hugepage for example. split_huge_page() can fail
|
|
if the page is pinned and you must handle this correctly.
|
|
|
|
Example to make mremap.c transparent hugepage aware with a one liner
|
|
change:
|
|
|
|
diff --git a/mm/mremap.c b/mm/mremap.c
|
|
--- a/mm/mremap.c
|
|
+++ b/mm/mremap.c
|
|
@@ -41,6 +41,7 @@ static pmd_t *get_old_pmd(struct mm_stru
|
|
return NULL;
|
|
|
|
pmd = pmd_offset(pud, addr);
|
|
+ split_huge_pmd(vma, pmd, addr);
|
|
if (pmd_none_or_clear_bad(pmd))
|
|
return NULL;
|
|
|
|
== Locking in hugepage aware code ==
|
|
|
|
We want as much code as possible hugepage aware, as calling
|
|
split_huge_page() or split_huge_pmd() has a cost.
|
|
|
|
To make pagetable walks huge pmd aware, all you need to do is to call
|
|
pmd_trans_huge() on the pmd returned by pmd_offset. You must hold the
|
|
mmap_sem in read (or write) mode to be sure an huge pmd cannot be
|
|
created from under you by khugepaged (khugepaged collapse_huge_page
|
|
takes the mmap_sem in write mode in addition to the anon_vma lock). If
|
|
pmd_trans_huge returns false, you just fallback in the old code
|
|
paths. If instead pmd_trans_huge returns true, you have to take the
|
|
page table lock (pmd_lock()) and re-run pmd_trans_huge. Taking the
|
|
page table lock will prevent the huge pmd to be converted into a
|
|
regular pmd from under you (split_huge_pmd can run in parallel to the
|
|
pagetable walk). If the second pmd_trans_huge returns false, you
|
|
should just drop the page table lock and fallback to the old code as
|
|
before. Otherwise you can proceed to process the huge pmd and the
|
|
hugepage natively. Once finished you can drop the page table lock.
|
|
|
|
== Refcounts and transparent huge pages ==
|
|
|
|
Refcounting on THP is mostly consistent with refcounting on other compound
|
|
pages:
|
|
|
|
- get_page()/put_page() and GUP operate in head page's ->_refcount.
|
|
|
|
- ->_refcount in tail pages is always zero: get_page_unless_zero() never
|
|
succeed on tail pages.
|
|
|
|
- map/unmap of the pages with PTE entry increment/decrement ->_mapcount
|
|
on relevant sub-page of the compound page.
|
|
|
|
- map/unmap of the whole compound page accounted in compound_mapcount
|
|
(stored in first tail page). For file huge pages, we also increment
|
|
->_mapcount of all sub-pages in order to have race-free detection of
|
|
last unmap of subpages.
|
|
|
|
PageDoubleMap() indicates that the page is *possibly* mapped with PTEs.
|
|
|
|
For anonymous pages PageDoubleMap() also indicates ->_mapcount in all
|
|
subpages is offset up by one. This additional reference is required to
|
|
get race-free detection of unmap of subpages when we have them mapped with
|
|
both PMDs and PTEs.
|
|
|
|
This is optimization required to lower overhead of per-subpage mapcount
|
|
tracking. The alternative is alter ->_mapcount in all subpages on each
|
|
map/unmap of the whole compound page.
|
|
|
|
For anonymous pages, we set PG_double_map when a PMD of the page got split
|
|
for the first time, but still have PMD mapping. The additional references
|
|
go away with last compound_mapcount.
|
|
|
|
File pages get PG_double_map set on first map of the page with PTE and
|
|
goes away when the page gets evicted from page cache.
|
|
|
|
split_huge_page internally has to distribute the refcounts in the head
|
|
page to the tail pages before clearing all PG_head/tail bits from the page
|
|
structures. It can be done easily for refcounts taken by page table
|
|
entries. But we don't have enough information on how to distribute any
|
|
additional pins (i.e. from get_user_pages). split_huge_page() fails any
|
|
requests to split pinned huge page: it expects page count to be equal to
|
|
sum of mapcount of all sub-pages plus one (split_huge_page caller must
|
|
have reference for head page).
|
|
|
|
split_huge_page uses migration entries to stabilize page->_refcount and
|
|
page->_mapcount of anonymous pages. File pages just got unmapped.
|
|
|
|
We safe against physical memory scanners too: the only legitimate way
|
|
scanner can get reference to a page is get_page_unless_zero().
|
|
|
|
All tail pages have zero ->_refcount until atomic_add(). This prevents the
|
|
scanner from getting a reference to the tail page up to that point. After the
|
|
atomic_add() we don't care about the ->_refcount value. We already known how
|
|
many references should be uncharged from the head page.
|
|
|
|
For head page get_page_unless_zero() will succeed and we don't mind. It's
|
|
clear where reference should go after split: it will stay on head page.
|
|
|
|
Note that split_huge_pmd() doesn't have any limitation on refcounting:
|
|
pmd can be split at any point and never fails.
|
|
|
|
== Partial unmap and deferred_split_huge_page() ==
|
|
|
|
Unmapping part of THP (with munmap() or other way) is not going to free
|
|
memory immediately. Instead, we detect that a subpage of THP is not in use
|
|
in page_remove_rmap() and queue the THP for splitting if memory pressure
|
|
comes. Splitting will free up unused subpages.
|
|
|
|
Splitting the page right away is not an option due to locking context in
|
|
the place where we can detect partial unmap. It's also might be
|
|
counterproductive since in many cases partial unmap unmap happens during
|
|
exit(2) if an THP crosses VMA boundary.
|
|
|
|
Function deferred_split_huge_page() is used to queue page for splitting.
|
|
The splitting itself will happen when we get memory pressure via shrinker
|
|
interface.
|