forked from rrcarlosr/Jetpack
385 lines
14 KiB
ReStructuredText
385 lines
14 KiB
ReStructuredText
=============
|
|
DRM Internals
|
|
=============
|
|
|
|
This chapter documents DRM internals relevant to driver authors and
|
|
developers working to add support for the latest features to existing
|
|
drivers.
|
|
|
|
First, we go over some typical driver initialization requirements, like
|
|
setting up command buffers, creating an initial output configuration,
|
|
and initializing core services. Subsequent sections cover core internals
|
|
in more detail, providing implementation notes and examples.
|
|
|
|
The DRM layer provides several services to graphics drivers, many of
|
|
them driven by the application interfaces it provides through libdrm,
|
|
the library that wraps most of the DRM ioctls. These include vblank
|
|
event handling, memory management, output management, framebuffer
|
|
management, command submission & fencing, suspend/resume support, and
|
|
DMA services.
|
|
|
|
Driver Initialization
|
|
=====================
|
|
|
|
At the core of every DRM driver is a :c:type:`struct drm_driver
|
|
<drm_driver>` structure. Drivers typically statically initialize
|
|
a drm_driver structure, and then pass it to
|
|
:c:func:`drm_dev_alloc()` to allocate a device instance. After the
|
|
device instance is fully initialized it can be registered (which makes
|
|
it accessible from userspace) using :c:func:`drm_dev_register()`.
|
|
|
|
The :c:type:`struct drm_driver <drm_driver>` structure
|
|
contains static information that describes the driver and features it
|
|
supports, and pointers to methods that the DRM core will call to
|
|
implement the DRM API. We will first go through the :c:type:`struct
|
|
drm_driver <drm_driver>` static information fields, and will
|
|
then describe individual operations in details as they get used in later
|
|
sections.
|
|
|
|
Driver Information
|
|
------------------
|
|
|
|
Driver Features
|
|
~~~~~~~~~~~~~~~
|
|
|
|
Drivers inform the DRM core about their requirements and supported
|
|
features by setting appropriate flags in the driver_features field.
|
|
Since those flags influence the DRM core behaviour since registration
|
|
time, most of them must be set to registering the :c:type:`struct
|
|
drm_driver <drm_driver>` instance.
|
|
|
|
u32 driver_features;
|
|
|
|
DRIVER_USE_AGP
|
|
Driver uses AGP interface, the DRM core will manage AGP resources.
|
|
|
|
DRIVER_LEGACY
|
|
Denote a legacy driver using shadow attach. Don't use.
|
|
|
|
DRIVER_KMS_LEGACY_CONTEXT
|
|
Used only by nouveau for backwards compatibility with existing userspace.
|
|
Don't use.
|
|
|
|
DRIVER_PCI_DMA
|
|
Driver is capable of PCI DMA, mapping of PCI DMA buffers to
|
|
userspace will be enabled. Deprecated.
|
|
|
|
DRIVER_SG
|
|
Driver can perform scatter/gather DMA, allocation and mapping of
|
|
scatter/gather buffers will be enabled. Deprecated.
|
|
|
|
DRIVER_HAVE_DMA
|
|
Driver supports DMA, the userspace DMA API will be supported.
|
|
Deprecated.
|
|
|
|
DRIVER_HAVE_IRQ; DRIVER_IRQ_SHARED
|
|
DRIVER_HAVE_IRQ indicates whether the driver has an IRQ handler
|
|
managed by the DRM Core. The core will support simple IRQ handler
|
|
installation when the flag is set. The installation process is
|
|
described in ?.
|
|
|
|
DRIVER_IRQ_SHARED indicates whether the device & handler support
|
|
shared IRQs (note that this is required of PCI drivers).
|
|
|
|
DRIVER_GEM
|
|
Driver use the GEM memory manager.
|
|
|
|
DRIVER_MODESET
|
|
Driver supports mode setting interfaces (KMS).
|
|
|
|
DRIVER_PRIME
|
|
Driver implements DRM PRIME buffer sharing.
|
|
|
|
DRIVER_RENDER
|
|
Driver supports dedicated render nodes.
|
|
|
|
DRIVER_ATOMIC
|
|
Driver supports atomic properties. In this case the driver must
|
|
implement appropriate obj->atomic_get_property() vfuncs for any
|
|
modeset objects with driver specific properties.
|
|
|
|
Major, Minor and Patchlevel
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
int major; int minor; int patchlevel;
|
|
The DRM core identifies driver versions by a major, minor and patch
|
|
level triplet. The information is printed to the kernel log at
|
|
initialization time and passed to userspace through the
|
|
DRM_IOCTL_VERSION ioctl.
|
|
|
|
The major and minor numbers are also used to verify the requested driver
|
|
API version passed to DRM_IOCTL_SET_VERSION. When the driver API
|
|
changes between minor versions, applications can call
|
|
DRM_IOCTL_SET_VERSION to select a specific version of the API. If the
|
|
requested major isn't equal to the driver major, or the requested minor
|
|
is larger than the driver minor, the DRM_IOCTL_SET_VERSION call will
|
|
return an error. Otherwise the driver's set_version() method will be
|
|
called with the requested version.
|
|
|
|
Name, Description and Date
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
char \*name; char \*desc; char \*date;
|
|
The driver name is printed to the kernel log at initialization time,
|
|
used for IRQ registration and passed to userspace through
|
|
DRM_IOCTL_VERSION.
|
|
|
|
The driver description is a purely informative string passed to
|
|
userspace through the DRM_IOCTL_VERSION ioctl and otherwise unused by
|
|
the kernel.
|
|
|
|
The driver date, formatted as YYYYMMDD, is meant to identify the date of
|
|
the latest modification to the driver. However, as most drivers fail to
|
|
update it, its value is mostly useless. The DRM core prints it to the
|
|
kernel log at initialization time and passes it to userspace through the
|
|
DRM_IOCTL_VERSION ioctl.
|
|
|
|
Device Instance and Driver Handling
|
|
-----------------------------------
|
|
|
|
.. kernel-doc:: drivers/gpu/drm/drm_drv.c
|
|
:doc: driver instance overview
|
|
|
|
.. kernel-doc:: drivers/gpu/drm/drm_drv.c
|
|
:export:
|
|
|
|
Driver Load
|
|
-----------
|
|
|
|
IRQ Registration
|
|
~~~~~~~~~~~~~~~~
|
|
|
|
The DRM core tries to facilitate IRQ handler registration and
|
|
unregistration by providing :c:func:`drm_irq_install()` and
|
|
:c:func:`drm_irq_uninstall()` functions. Those functions only
|
|
support a single interrupt per device, devices that use more than one
|
|
IRQs need to be handled manually.
|
|
|
|
Managed IRQ Registration
|
|
''''''''''''''''''''''''
|
|
|
|
:c:func:`drm_irq_install()` starts by calling the irq_preinstall
|
|
driver operation. The operation is optional and must make sure that the
|
|
interrupt will not get fired by clearing all pending interrupt flags or
|
|
disabling the interrupt.
|
|
|
|
The passed-in IRQ will then be requested by a call to
|
|
:c:func:`request_irq()`. If the DRIVER_IRQ_SHARED driver feature
|
|
flag is set, a shared (IRQF_SHARED) IRQ handler will be requested.
|
|
|
|
The IRQ handler function must be provided as the mandatory irq_handler
|
|
driver operation. It will get passed directly to
|
|
:c:func:`request_irq()` and thus has the same prototype as all IRQ
|
|
handlers. It will get called with a pointer to the DRM device as the
|
|
second argument.
|
|
|
|
Finally the function calls the optional irq_postinstall driver
|
|
operation. The operation usually enables interrupts (excluding the
|
|
vblank interrupt, which is enabled separately), but drivers may choose
|
|
to enable/disable interrupts at a different time.
|
|
|
|
:c:func:`drm_irq_uninstall()` is similarly used to uninstall an
|
|
IRQ handler. It starts by waking up all processes waiting on a vblank
|
|
interrupt to make sure they don't hang, and then calls the optional
|
|
irq_uninstall driver operation. The operation must disable all hardware
|
|
interrupts. Finally the function frees the IRQ by calling
|
|
:c:func:`free_irq()`.
|
|
|
|
Manual IRQ Registration
|
|
'''''''''''''''''''''''
|
|
|
|
Drivers that require multiple interrupt handlers can't use the managed
|
|
IRQ registration functions. In that case IRQs must be registered and
|
|
unregistered manually (usually with the :c:func:`request_irq()` and
|
|
:c:func:`free_irq()` functions, or their :c:func:`devm_request_irq()` and
|
|
:c:func:`devm_free_irq()` equivalents).
|
|
|
|
When manually registering IRQs, drivers must not set the
|
|
DRIVER_HAVE_IRQ driver feature flag, and must not provide the
|
|
irq_handler driver operation. They must set the :c:type:`struct
|
|
drm_device <drm_device>` irq_enabled field to 1 upon
|
|
registration of the IRQs, and clear it to 0 after unregistering the
|
|
IRQs.
|
|
|
|
Memory Manager Initialization
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
Every DRM driver requires a memory manager which must be initialized at
|
|
load time. DRM currently contains two memory managers, the Translation
|
|
Table Manager (TTM) and the Graphics Execution Manager (GEM). This
|
|
document describes the use of the GEM memory manager only. See ? for
|
|
details.
|
|
|
|
Miscellaneous Device Configuration
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
Another task that may be necessary for PCI devices during configuration
|
|
is mapping the video BIOS. On many devices, the VBIOS describes device
|
|
configuration, LCD panel timings (if any), and contains flags indicating
|
|
device state. Mapping the BIOS can be done using the pci_map_rom()
|
|
call, a convenience function that takes care of mapping the actual ROM,
|
|
whether it has been shadowed into memory (typically at address 0xc0000)
|
|
or exists on the PCI device in the ROM BAR. Note that after the ROM has
|
|
been mapped and any necessary information has been extracted, it should
|
|
be unmapped; on many devices, the ROM address decoder is shared with
|
|
other BARs, so leaving it mapped could cause undesired behaviour like
|
|
hangs or memory corruption.
|
|
|
|
Bus-specific Device Registration and PCI Support
|
|
------------------------------------------------
|
|
|
|
A number of functions are provided to help with device registration. The
|
|
functions deal with PCI and platform devices respectively and are only
|
|
provided for historical reasons. These are all deprecated and shouldn't
|
|
be used in new drivers. Besides that there's a few helpers for pci
|
|
drivers.
|
|
|
|
.. kernel-doc:: drivers/gpu/drm/drm_pci.c
|
|
:export:
|
|
|
|
.. kernel-doc:: drivers/gpu/drm/drm_platform.c
|
|
:export:
|
|
|
|
Open/Close, File Operations and IOCTLs
|
|
======================================
|
|
|
|
Open and Close
|
|
--------------
|
|
|
|
Open and close handlers. None of those methods are mandatory::
|
|
|
|
int (*firstopen) (struct drm_device *);
|
|
void (*lastclose) (struct drm_device *);
|
|
int (*open) (struct drm_device *, struct drm_file *);
|
|
void (*preclose) (struct drm_device *, struct drm_file *);
|
|
void (*postclose) (struct drm_device *, struct drm_file *);
|
|
|
|
The firstopen method is called by the DRM core for legacy UMS (User Mode
|
|
Setting) drivers only when an application opens a device that has no
|
|
other opened file handle. UMS drivers can implement it to acquire device
|
|
resources. KMS drivers can't use the method and must acquire resources
|
|
in the load method instead.
|
|
|
|
Similarly the lastclose method is called when the last application
|
|
holding a file handle opened on the device closes it, for both UMS and
|
|
KMS drivers. Additionally, the method is also called at module unload
|
|
time or, for hot-pluggable devices, when the device is unplugged. The
|
|
firstopen and lastclose calls can thus be unbalanced.
|
|
|
|
The open method is called every time the device is opened by an
|
|
application. Drivers can allocate per-file private data in this method
|
|
and store them in the struct :c:type:`struct drm_file
|
|
<drm_file>` driver_priv field. Note that the open method is
|
|
called before firstopen.
|
|
|
|
The close operation is split into preclose and postclose methods.
|
|
Drivers must stop and cleanup all per-file operations in the preclose
|
|
method. For instance pending vertical blanking and page flip events must
|
|
be cancelled. No per-file operation is allowed on the file handle after
|
|
returning from the preclose method.
|
|
|
|
Finally the postclose method is called as the last step of the close
|
|
operation, right before calling the lastclose method if no other open
|
|
file handle exists for the device. Drivers that have allocated per-file
|
|
private data in the open method should free it here.
|
|
|
|
The lastclose method should restore CRTC and plane properties to default
|
|
value, so that a subsequent open of the device will not inherit state
|
|
from the previous user. It can also be used to execute delayed power
|
|
switching state changes, e.g. in conjunction with the :ref:`vga_switcheroo`
|
|
infrastructure. Beyond that KMS drivers should not do any
|
|
further cleanup. Only legacy UMS drivers might need to clean up device
|
|
state so that the vga console or an independent fbdev driver could take
|
|
over.
|
|
|
|
File Operations
|
|
---------------
|
|
|
|
.. kernel-doc:: drivers/gpu/drm/drm_fops.c
|
|
:doc: file operations
|
|
|
|
.. kernel-doc:: drivers/gpu/drm/drm_fops.c
|
|
:export:
|
|
|
|
IOCTLs
|
|
------
|
|
|
|
struct drm_ioctl_desc \*ioctls; int num_ioctls;
|
|
Driver-specific ioctls descriptors table.
|
|
|
|
Driver-specific ioctls numbers start at DRM_COMMAND_BASE. The ioctls
|
|
descriptors table is indexed by the ioctl number offset from the base
|
|
value. Drivers can use the DRM_IOCTL_DEF_DRV() macro to initialize
|
|
the table entries.
|
|
|
|
::
|
|
|
|
DRM_IOCTL_DEF_DRV(ioctl, func, flags)
|
|
|
|
``ioctl`` is the ioctl name. Drivers must define the DRM_##ioctl and
|
|
DRM_IOCTL_##ioctl macros to the ioctl number offset from
|
|
DRM_COMMAND_BASE and the ioctl number respectively. The first macro is
|
|
private to the device while the second must be exposed to userspace in a
|
|
public header.
|
|
|
|
``func`` is a pointer to the ioctl handler function compatible with the
|
|
``drm_ioctl_t`` type.
|
|
|
|
::
|
|
|
|
typedef int drm_ioctl_t(struct drm_device *dev, void *data,
|
|
struct drm_file *file_priv);
|
|
|
|
``flags`` is a bitmask combination of the following values. It restricts
|
|
how the ioctl is allowed to be called.
|
|
|
|
- DRM_AUTH - Only authenticated callers allowed
|
|
|
|
- DRM_MASTER - The ioctl can only be called on the master file handle
|
|
|
|
- DRM_ROOT_ONLY - Only callers with the SYSADMIN capability allowed
|
|
|
|
- DRM_CONTROL_ALLOW - The ioctl can only be called on a control
|
|
device
|
|
|
|
- DRM_UNLOCKED - The ioctl handler will be called without locking the
|
|
DRM global mutex. This is the enforced default for kms drivers (i.e.
|
|
using the DRIVER_MODESET flag) and hence shouldn't be used any more
|
|
for new drivers.
|
|
|
|
.. kernel-doc:: drivers/gpu/drm/drm_ioctl.c
|
|
:export:
|
|
|
|
Legacy Support Code
|
|
===================
|
|
|
|
The section very briefly covers some of the old legacy support code
|
|
which is only used by old DRM drivers which have done a so-called
|
|
shadow-attach to the underlying device instead of registering as a real
|
|
driver. This also includes some of the old generic buffer management and
|
|
command submission code. Do not use any of this in new and modern
|
|
drivers.
|
|
|
|
Legacy Suspend/Resume
|
|
---------------------
|
|
|
|
The DRM core provides some suspend/resume code, but drivers wanting full
|
|
suspend/resume support should provide save() and restore() functions.
|
|
These are called at suspend, hibernate, or resume time, and should
|
|
perform any state save or restore required by your device across suspend
|
|
or hibernate states.
|
|
|
|
int (\*suspend) (struct drm_device \*, pm_message_t state); int
|
|
(\*resume) (struct drm_device \*);
|
|
Those are legacy suspend and resume methods which *only* work with the
|
|
legacy shadow-attach driver registration functions. New driver should
|
|
use the power management interface provided by their bus type (usually
|
|
through the :c:type:`struct device_driver <device_driver>`
|
|
dev_pm_ops) and set these methods to NULL.
|
|
|
|
Legacy DMA Services
|
|
-------------------
|
|
|
|
This should cover how DMA mapping etc. is supported by the core. These
|
|
functions are deprecated and should not be used.
|