px4-firmware/apps/nshlib/nsh_ddcmd.c

644 lines
17 KiB
C

/****************************************************************************
* apps/nshlib/nsh_ddcmd.c
*
* Copyright (C) 2008-2009, 2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <stdint.h>
#include <stdbool.h>
#include <stdlib.h>
#include <unistd.h>
#include <fcntl.h>
#include <string.h>
#include <debug.h>
#include <errno.h>
#include <nuttx/fs.h>
#include "nsh.h"
#include "nsh_console.h"
#if CONFIG_NFILE_DESCRIPTORS > 0 && !defined(CONFIG_NSH_DISABLE_DD)
/****************************************************************************
* Definitions
****************************************************************************/
/* If no sector size is specified wity BS=, then the following default value
* is used.
*/
#define DEFAULT_SECTSIZE 512
/* At present, piping of input and output are not support, i.e., both of=
* and if= arguments are required.
*/
#undef CAN_PIPE_FROM_STD
/* Function pointer calls are only need if block drivers are supported
* (or, rather, if mount points are supported in the file system)
*/
#ifndef CONFIG_DISABLE_MOUNTPOINT
# define DD_INFD ((dd)->inf.fd)
# define DD_INHANDLE ((dd)->inf.handle)
# define DD_OUTFD ((dd)->outf.fd)
# define DD_OUTHANDLE ((dd)->outf.handle)
# define DD_READ(dd) ((dd)->infread(dd))
# define DD_WRITE(dd) ((dd)->outfwrite(dd))
# define DD_INCLOSE(dd) ((dd)->infclose(dd))
# define DD_OUTCLOSE(dd) ((dd)->outfclose(dd))
#else
# define DD_INFD ((dd)->infd)
# undef DD_INHANDLE
# define DD_OUTFD ((dd)->outfd)
# undef DD_OUTHANDLE
# define DD_READ(dd) dd_readch(dd)
# define DD_WRITE(dd) dd_writech(dd)
# define DD_INCLOSE(dd) dd_infclosech(dd)
# define DD_OUTCLOSE(dd) dd_outfclosech(dd)
#endif
/****************************************************************************
* Private Types
****************************************************************************/
struct dd_s
{
FAR struct nsh_vtbl_s *vtbl;
#ifndef CONFIG_DISABLE_MOUNTPOINT
union
{
FAR void *handle; /* BCH lib handle for block device*/
int fd; /* File descriptor of the character device */
} inf;
#else
int infd; /* File descriptor of the input device */
#endif
#ifndef CONFIG_DISABLE_MOUNTPOINT
union
{
FAR void *handle; /* BCH lib handle for block device*/
int fd; /* File descriptor of the character device */
} outf;
#else
int outfd; /* File descriptor of the output device */
#endif
uint32_t nsectors; /* Number of sectors to transfer */
uint32_t sector; /* The current sector number */
uint32_t skip; /* The number of sectors skipped on input */
bool eof; /* true: The of the input or output file has been hit */
uint16_t sectsize; /* Size of one sector */
uint16_t nbytes; /* Number of valid bytes in the buffer */
uint8_t *buffer; /* Buffer of data to write to the output file */
/* Function pointers to handle differences between block and character devices */
#ifndef CONFIG_DISABLE_MOUNTPOINT
int (*infread)(struct dd_s *dd);
void (*infclose)(struct dd_s *dd);
int (*outfwrite)(struct dd_s *dd);
void (*outfclose)(struct dd_s *dd);
#endif
};
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
/****************************************************************************
* Private Data
****************************************************************************/
static const char g_dd[] = "dd";
/****************************************************************************
* Public Data
****************************************************************************/
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: dd_outfcloseblk
****************************************************************************/
#ifndef CONFIG_DISABLE_MOUNTPOINT
static void dd_outfcloseblk(struct dd_s *dd)
{
(void)bchlib_teardown(DD_OUTHANDLE);
}
#endif
/****************************************************************************
* Name: dd_outfclosech
****************************************************************************/
static void dd_outfclosech(struct dd_s *dd)
{
(void)close(DD_OUTFD);
}
/****************************************************************************
* Name: dd_infcloseblk
****************************************************************************/
#ifndef CONFIG_DISABLE_MOUNTPOINT
static void dd_infcloseblk(struct dd_s *dd)
{
(void)bchlib_teardown(DD_INHANDLE);
}
#endif
/****************************************************************************
* Name: dd_infclosech
****************************************************************************/
static void dd_infclosech(struct dd_s *dd)
{
(void)close(DD_INFD);
}
/****************************************************************************
* Name: dd_writeblk
****************************************************************************/
#ifndef CONFIG_DISABLE_MOUNTPOINT
static int dd_writeblk(struct dd_s *dd)
{
ssize_t nbytes;
off_t offset = (dd->sector - dd->skip) * dd->sectsize;
/* Write the sector at the specified offset */
nbytes = bchlib_write(DD_OUTHANDLE, (char*)dd->buffer, offset, dd->sectsize);
if (nbytes < 0)
{
/* bchlib_write return -EFBIG on attempts to write past the end of
* the device.
*/
if (nbytes == -EFBIG)
{
dd->eof = true; /* Set end-of-file */
}
else
{
FAR struct nsh_vtbl_s *vtbl = dd->vtbl;
nsh_output(vtbl, g_fmtcmdfailed, g_dd, "bshlib_write", NSH_ERRNO_OF(-nbytes));
return ERROR;
}
}
return OK;
}
#endif
/****************************************************************************
* Name: dd_writech
****************************************************************************/
static int dd_writech(struct dd_s *dd)
{
uint8_t *buffer = dd->buffer;
uint16_t written ;
ssize_t nbytes;
/* Is the out buffer full (or is this the last one)? */
written = 0;
do
{
nbytes = write(DD_OUTFD, buffer, dd->sectsize - written);
if (nbytes < 0)
{
FAR struct nsh_vtbl_s *vtbl = dd->vtbl;
nsh_output(vtbl, g_fmtcmdfailed, g_dd, "write", NSH_ERRNO_OF(-nbytes));
return ERROR;
}
written += nbytes;
buffer += nbytes;
}
while (written < dd->sectsize);
return OK;
}
/****************************************************************************
* Name: dd_readblk
****************************************************************************/
#ifndef CONFIG_DISABLE_MOUNTPOINT
static int dd_readblk(struct dd_s *dd)
{
ssize_t nbytes;
off_t offset = dd->sector * dd->sectsize;
nbytes = bchlib_read(DD_INHANDLE, (char*)dd->buffer, offset, dd->sectsize);
if (nbytes < 0)
{
FAR struct nsh_vtbl_s *vtbl = dd->vtbl;
nsh_output(vtbl, g_fmtcmdfailed, g_dd, "bshlib_read", NSH_ERRNO_OF(-nbytes));
return ERROR;
}
/* bchlib_read return 0 on attempts to write past the end of the device. */
dd->nbytes = nbytes;
dd->eof = (nbytes == 0);
return OK;
}
#endif
/****************************************************************************
* Name: dd_readch
****************************************************************************/
static int dd_readch(struct dd_s *dd)
{
uint8_t *buffer = dd->buffer;
ssize_t nbytes;
dd->nbytes = 0;
do
{
nbytes = read(DD_INFD, buffer, dd->sectsize - dd->nbytes);
if (nbytes < 0)
{
FAR struct nsh_vtbl_s *vtbl = dd->vtbl;
nsh_output(vtbl, g_fmtcmdfailed, g_dd, "read", NSH_ERRNO_OF(-nbytes));
return ERROR;
}
dd->nbytes += nbytes;
buffer += nbytes;
}
while (dd->nbytes < dd->sectsize && nbytes > 0);
dd->eof |= (dd->nbytes == 0);
return OK;
}
/****************************************************************************
* Name: dd_infopen
****************************************************************************/
#ifndef CONFIG_DISABLE_MOUNTPOINT
static int dd_filetype(const char *filename)
{
struct stat sb;
int ret;
/* Get the type of the file */
ret = stat(filename, &sb);
if (ret < 0)
{
return ERROR; /* Return -1 on failure */
}
return S_ISBLK(sb.st_mode); /* Return true(1) if block, false(0) if char */
}
#endif
/****************************************************************************
* Name: dd_infopen
****************************************************************************/
#ifndef CONFIG_DISABLE_MOUNTPOINT
static inline int dd_infopen(const char *name, struct dd_s *dd)
{
FAR struct nsh_vtbl_s *vtbl = dd->vtbl;
int ret;
int type;
/* Get the type of the input file */
type = dd_filetype(name);
if (type < 0)
{
nsh_output(vtbl, g_fmtcmdfailed, g_dd, "stat", NSH_ERRNO_OF(-type));
return type;
}
/* Open the input file */
if (!type)
{
DD_INFD = open(name, O_RDONLY);
if (DD_INFD < 0)
{
nsh_output(vtbl, g_fmtcmdfailed, g_dd, "open", NSH_ERRNO);
return ERROR;
}
dd->infread = dd_readch; /* Character oriented read */
dd->infclose = dd_infclosech;
}
else
{
ret = bchlib_setup(name, true, &DD_INHANDLE);
if (ret < 0)
{
return ERROR;
}
dd->infread = dd_readblk;
dd->infclose = dd_infcloseblk;
}
return OK;
}
#else
static inline int dd_infopen(const char *name, struct dd_s *dd)
{
DD_INFD = open(name, O_RDONLY);
if (DD_INFD < 0)
{
FAR struct nsh_vtbl_s *vtbl = dd->vtbl;
nsh_output(vtbl, g_fmtcmdfailed, g_dd, "open", NSH_ERRNO);
return ERROR;
}
return OK;
}
#endif
/****************************************************************************
* Name: dd_outfopen
****************************************************************************/
#ifndef CONFIG_DISABLE_MOUNTPOINT
static inline int dd_outfopen(const char *name, struct dd_s *dd)
{
int type;
int ret = OK;
/* Get the type of the output file */
type = dd_filetype(name);
/* Open the block driver for input */
if (type == true)
{
ret = bchlib_setup(name, true, &DD_OUTHANDLE);
if (ret < 0)
{
return ERROR;
}
dd->outfwrite = dd_writeblk; /* Block oriented write */
dd->outfclose = dd_outfcloseblk;
}
/* Otherwise, the file is character oriented or does not exist */
else
{
DD_OUTFD = open(name, O_WRONLY|O_CREAT|O_TRUNC, 0644);
if (DD_OUTFD < 0)
{
FAR struct nsh_vtbl_s *vtbl = dd->vtbl;
nsh_output(vtbl, g_fmtcmdfailed, g_dd, "open", NSH_ERRNO);
return ERROR;
}
dd->outfwrite = dd_writech; /* Character oriented write */
dd->outfclose = dd_outfclosech;
}
return OK;
}
#else
static inline int dd_outfopen(const char *name, struct dd_s *dd)
{
DD_OUTFD = open(name, O_WRONLY|O_CREAT|O_TRUNC, 0644);
if (DD_OUTFD < 0)
{
nsh_output(dd->vtbl, g_fmtcmdfailed, g_dd, "open", NSH_ERRNO);
return ERROR;
}
return OK;
}
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: cmd_dd
****************************************************************************/
int cmd_dd(FAR struct nsh_vtbl_s *vtbl, int argc, char **argv)
{
struct dd_s dd;
char *infile = NULL;
char *outfile = NULL;
int ret = ERROR;
int i;
/* Initialize the dd structure */
memset(&dd, 0, sizeof(struct dd_s));
dd.vtbl = vtbl; /* For nsh_output */
dd.sectsize = DEFAULT_SECTSIZE; /* Sector size if 'bs=' not provided */
dd.nsectors = 0xffffffff; /* MAX_UINT32 */
/* If no IF= option is provided on the command line, then read
* from stdin.
*/
#ifdef CAN_PIPE_FROM_STD
DD_INFD = 0; /* stdin */
#ifndef CONFIG_NSH_DISABLE_DD
dd.infread = readch; /* Character oriented read */
dd.infclose = noclose; /* Don't close stdin */
#endif
#endif
/* If no OF= option is provided on the command line, then write
* to stdout.
*/
#ifdef CAN_PIPE_FROM_STD
DD_OUTDF = 1; /* stdout */
#ifndef CONFIG_NSH_DISABLE_DD
dd.outfwrite = writech; /* Character oriented write */
dd.outfclose = noclose; /* Don't close stdout */
#endif
#endif
/* Parse command line parameters */
for (i = 1; i < argc; i++)
{
if (strncmp(argv[i], "if=", 3) == 0)
{
infile = nsh_getfullpath(vtbl, &argv[i][3]);
}
else if (strncmp(argv[i], "of=", 3) == 0)
{
outfile = nsh_getfullpath(vtbl, &argv[i][3]);
}
else if (strncmp(argv[i], "bs=", 3) == 0)
{
dd.sectsize = atoi(&argv[i][3]);
}
else if (strncmp(argv[i], "count=", 6) == 0)
{
dd.nsectors = atoi(&argv[i][6]);
}
else if (strncmp(argv[i], "skip=", 5) == 0)
{
dd.skip = atoi(&argv[i][5]);
}
}
#ifndef CAN_PIPE_FROM_STD
if (!infile || !outfile)
{
nsh_output(vtbl, g_fmtargrequired, g_dd);
goto errout_with_paths;
}
#endif
if (dd.skip < 0 || dd.skip > dd.nsectors)
{
nsh_output(vtbl, g_fmtarginvalid, g_dd);
goto errout_with_paths;
}
/* Allocate the I/O buffer */
dd.buffer = malloc(dd.sectsize);
if (!dd.buffer)
{
nsh_output(vtbl, g_fmtcmdoutofmemory, g_dd);
goto errout_with_paths;
}
/* Open the input file */
ret = dd_infopen(infile, &dd);
if (ret < 0)
{
goto errout_with_paths;
}
/* Open the output file */
ret = dd_outfopen(outfile, &dd);
if (ret < 0)
{
goto errout_with_inf;
}
/* Then perform the data transfer */
dd.sector = 0;
while (!dd.eof && dd.nsectors > 0)
{
/* Read one sector from from the input */
ret = DD_READ(&dd);
if (ret < 0)
{
goto errout_with_outf;
}
/* Has the incoming data stream ended? */
if (!dd.eof)
{
/* Pad with zero if necessary (at the end of file only) */
for (i = dd.nbytes; i < dd.sectsize; i++)
{
dd.buffer[i] = 0;
}
/* Write one sector to the output file */
if (dd.sector >= dd.skip)
{
ret = DD_WRITE(&dd);
if (ret < 0)
{
goto errout_with_outf;
}
/* Decrement to show that a sector was written */
dd.nsectors--;
}
/* Increment the sector number */
dd.sector++;
}
}
ret = OK;
errout_with_outf:
DD_INCLOSE(&dd);
errout_with_inf:
DD_OUTCLOSE(&dd);
free(dd.buffer);
errout_with_paths:
if (infile)
{
free(infile);
}
if (outfile)
{
free(outfile);
}
return ret;
}
#endif /* CONFIG_NFILE_DESCRIPTORS && !CONFIG_NSH_DISABLE_DD */