px4-firmware/boards/px4/fmu-v5x/init/rc.board_sensors

86 lines
1.7 KiB
Bash

#!/bin/sh
#
# PX4 FMUv5X specific board sensors init
#------------------------------------------------------------------------------
board_adc start
if param compare SENS_EN_INA226 1
then
# Start Digital power monitors
ina226 -X -b 1 -t 1 -k start
ina226 -X -b 2 -t 2 -k start
fi
if param compare SENS_EN_INA228 1
then
# Start Digital power monitors
ina228 -X -b 1 -t 1 -k start
ina228 -X -b 2 -t 2 -k start
fi
if ver hwtypecmp V5X90 V5X91 V5X92 V5Xa0 V5Xa1 V5Xa2
then
#SKYNODE base fmu board orientation
if ver hwtypecmp V5X90 V5X91 V5Xa0 V5Xa1
then
# Internal SPI BMI088
bmi088 -A -R 2 -s start
bmi088 -G -R 2 -s start
else
# Internal SPI bus ICM20649
icm20649 -s -R 4 start
fi
# Internal SPI bus ICM42688p
icm42688p -R 4 -s start
# Internal SPI bus ICM-20602 (hard-mounted)
icm20602 -R 8 -s start
# Internal magnetometer on I2c
bmm150 -I -R 6 start
else
#FMUv5Xbase board orientation
if ver hwtypecmp V5X00 V5X01
then
# Internal SPI BMI088
bmi088 -A -R 4 -s start
bmi088 -G -R 4 -s start
else
# Internal SPI bus ICM20649
icm20649 -s -R 6 start
fi
# Internal SPI bus ICM42688p
icm42688p -R 6 -s start
# Internal SPI bus ICM-20602 (hard-mounted)
icm20602 -R 10 -s start
# Internal magnetometer on I2c
bmm150 -I start
fi
# External compass on GPS1/I2C1 (the 3rd external bus): standard Holybro Pixhawk 4 or CUAV V5 GPS/compass puck (with lights, safety button, and buzzer)
ist8310 -X -b 1 -R 10 start
# Possible internal Baro
# Disable startup of internal baros if param is set to false
if param compare SENS_INT_BARO_EN 1
then
bmp388 -I -a 0x77 start
if ver hwtypecmp V5X00 V5X90 V5Xa0
then
bmp388 -I start
else
bmp388 -X -b 2 start
fi
fi