px4-firmware/nuttx/drivers/usbdev/Kconfig

496 lines
13 KiB
Plaintext

#
# For a description of the syntax of this configuration file,
# see misc/tools/kconfig-language.txt.
#
menu "Device Controller Driver Options"
config USBDEV_ISOCHRONOUS
bool "Enable isochronous"
default n
---help---
Build in extra support for isochronous endpoints
config USBDEV_DUALSPEED
bool "Enable high and full speed"
default n
---help---
Hardware handles high and full speed operation (USB 2.0)
choice USBDEV_POWERED
prompt "Select USB device powered"
default USBDEV_SELFPOWERED
config USBDEV_SELFPOWERED
bool "Self powered"
---help---
Will cause USB features to indicate that the device is self-powered
config USBDEV_BUSPOWERED
bool "Bus powered"
---help---
Will cause USB features to indicate that the device is self-powered
endchoice
config USBDEV_MAXPOWER
int "Maximum power consumption in mA"
default 100
depends on USBDEV_BUSPOWERED
---help---
Maximum power consumption in mA
config USBDEV_DMA
bool "Enable DMA methods"
default n
---help---
Select this enable DMA-related methods in USB device controller driver
interface. These methods include the DMA buffer allocation methods:
allobuffer() and freebuffer().
The USB class driver allocates packet I/O buffers for data transfer by
calling the driver allocbuffer() and freebuffer() methods. Those methods
are only available if USBDEV_DMA is defined in the system configuration.
config USBDEV_DMAMEMORY
bool "Board DMA Allocation Hooks"
default n
depends on USBDEV_DMA
---help---
The USB class driver allocates packet I/O buffers for data transfer by
calling the driver allocbuffer() and freebuffer() methods. Those methods
are only available if USBDEV_DMA is defined in the system configuration.
If USBDEV_DMAMEMORY is also defined in the NuttX configuration, then
the driver implementations of the allocbuffer() and freebuffer()
methods may use board-specific usbdev_dma_alloc() and usbdev_dma_free().
If USBDEV_DMA and USBDEV_DMAMEMORY are both defined, then the board-
specific logic must provide the functions usbdev_dma_alloc() and
usbdev_dma_free(): usbdev_dma_alloc() will allocate DMA-capable
memory of the specified size; usbdev_dma_free() is the corresponding
function that will be called to free the DMA-capable memory.
config USBDEV_TRACE
bool "Enable USB tracing for debug"
default n
---help---
Enables USB tracing for debug
config USBDEV_TRACE_NRECORDS
int "Number of trace entries to remember"
default 32
depends on USBDEV_TRACE
---help---
Number of trace entries to remember
endmenu
menuconfig USBDEV_COMPOSITE
bool "USB composite device support"
default n
---help---
Enables USB composite device support
if USBDEV_COMPOSITE
#config COMPOSITE_IAD
# bool ""
# default n
# ---help---
# If one of the members of the composite has multiple interfaces
# (such as CDC/ACM), then an Interface Association Descriptor (IAD)
# will be necessary. Default: IAD will be used automatically if
# needed. It should not be necessary to set this.
config COMPOSITE_EP0MAXPACKET
int "Max packet size for endpoint 0"
default 64
---help---
Max packet size for endpoint 0
config COMPOSITE_VENDORID
hex "Composite vendor ID"
default 0
config COMPOSITE_VENDORSTR
string "Composite vendor ID"
default "Nuttx"
---help---
The vendor ID code/string
config COMPOSITE_PRODUCTID
hex "Composite product id"
default 0
config COMPOSITE_PRODUCTSTR
string "Composite product string"
default "Composite device"
---help---
The product ID code/string
config COMPOSITE_SERIALSTR
string "Composite serial string"
default "001"
---help---
Device serial number string
config COMPOSITE_CONFIGSTR
string "Configuration string"
default "Nuttx COMPOSITE config"
---help---
Configuration string
config COMPOSITE_VERSIONNO
string "Composite version number"
default ""
---help---
Interface version number.
endif
menuconfig PL2303
bool "Emulates the Prolific PL2303 serial/USB converter"
default n
---help---
This logic emulates the Prolific PL2303 serial/USB converter
if PL2303
config PL2303_EPINTIN
int "Logical endpoint numbers"
default 1
config PL2303_EPBULKOUT
int "Endpoint Bulkout"
default 2
config PL2303_EPBULKIN
int "Endpoint Bulkin"
default 3
config PL2303_EP0MAXPACKET
int "Packet and request buffer sizes"
default 64
config PL2303_NWRREQS
int "Number of read requests that can be in flight"
default 4
---help---
The number of read requests that can be in flight
config PL2303_NRDREQS
int "Number of write requests that can be in flight"
default 4
---help---
The number of write/read requests that can be in flight
config PL2303_RXBUFSIZE
int "Receive buffer size"
default 256
---help---
Size of the serial receive/transmit buffers
config PL2303_TXBUFSIZE
int "Transmit buffer size"
default 256
---help---
Size of the serial receive/transmit buffers
config PL2303_VENDORID
hex "Vendor ID"
default 0x067b
config PL2303_PRODUCTID
hex "Product ID"
default 0x2303
config PL2303_VENDORSTR
string "Vendor string"
default "NuttX"
config PL2303_PRODUCTSTR
string "Product string"
default "USBdev Serial"
endif
menuconfig CDCACM
bool "USB Modem (CDC ACM) support"
default n
---help---
Enables USB Modem (CDC ACM) support
if CDCACM
config CDCACM_COMPOSITE
bool "CDCACM composite support"
default n
depends on USBDEV_COMPOSITE
---help---
Configure the CDC serial driver as part of a composite driver
(only if CONFIG_USBDEV_COMPOSITE is also defined)
config CDCACM_IFNOBASE
int "Offset the CDC/ACM interface numbers"
default 0
depends on CDCACM_COMPOSITE
---help---
If the CDC driver is part of a composite device, then this may need to
be defined to offset the CDC/ACM interface numbers so that they are
unique and contiguous. When used with the Mass Storage driver, the
correct value for this offset is zero.
config CDCACM_STRBASE
int "Offset the CDC/ACM string numbers"
default 0
depends on CDCACM_COMPOSITE
---help---
If the CDC driver is part of a composite device, then this may need to
be defined to offset the CDC/ACM string numbers so that they are
unique and contiguous. When used with the Mass Storage driver, the
correct value for this offset is four (this value actuallly only needs
to be defined if names are provided for the Notification interface,
config CDCACM_NOTIFSTR, or the data interface, CONFIG_CDCACM_DATAIFSTR).
config CDCACM_EP0MAXPACKET
int "Endpoint 0 max packet size"
default 64
---help---
Endpoint 0 max packet size. Default 64.
config CDCACM_EPINTIN
int "Hardware endpoint that supports interrupt IN operation"
default 2
---help---
The logical 7-bit address of a hardware endpoint that supports
interrupt IN operation. Default 2.
config CDCACM_EPINTIN_FSSIZE
int "Endpoint in full speed size"
default 64
---help---
Max package size for the interrupt IN endpoint if full speed mode.
Default 64.
config CDCACM_EPINTIN_HSSIZE
int "Endpoint in high speed size"
default 64
---help---
Max package size for the interrupt IN endpoint if high speed mode.
Default 64.
config CDCACM_EPBULKOUT
int "Endpoint bulk out"
default 0
---help---
The logical 7-bit address of a hardware endpoint that supports
bulk OUT operation
config CDCACM_EPBULKOUT_FSSIZE
int "Endpoint bulk out full speed size"
default 64
---help---
Max package size for the bulk OUT endpoint if full speed mode.
Default 64.
config CDCACM_EPBULKOUT_HSSIZE
int "Endpoint bulk out high speed size"
default 512
---help---
Max package size for the bulk OUT endpoint if high speed mode.
Default 512.
config CDCACM_EPBULKIN
int "Endpoint bulk in"
default 0
---help---
The logical 7-bit address of a hardware endpoint that supports
bulk IN operation
config CDCACM_EPBULKIN_FSSIZE
int "Endpoint bulk in full speed size"
default 64
---help---
Max package size for the bulk IN endpoint if full speed mode.
Default 64.
config CDCACM_EPBULKIN_HSSIZE
int "Endpoint bulk in high speed size"
default 512
---help---
Max package size for the bulk IN endpoint if high speed mode.
Default 512.
config CDCACM_NWRREQS
int "Number of read requests that can be in flight"
default 4
---help---
The number of read requests that can be in flight
config CDCACM_NRDREQS
int "Number of write requests that can be in flight"
default 4
---help---
The number of write/read requests that can be in flight
config CDCACM_RXBUFSIZE
int "Receive buffer size"
default 256
---help---
Size of the serial receive/transmit buffers
config CDCACM_TXBUFSIZE
bool "Transmit buffer size"
default 256
---help---
Size of the serial receive/transmit buffers
config CDCACM_VENDORID
hex "Vendor ID"
default 0x0525
---help---
The vendor ID code/string. Default 0x0525 and "NuttX"
0x0525 is the Netchip vendor and should not be used in any
products. This default VID was selected for compatibility with
the Linux CDC ACM default VID.
config CDCACM_PRODUCTID
hex "Product ID"
default 0xa4a7
---help---
The product ID code/string. Default 0xa4a7 and "CDC/ACM Serial"
0xa4a7 was selected for compatibility with the Linux CDC ACM
default PID.
config CDCACM_VENDORSTR
string "Vendor string"
default "NuttX"
config CDCACM_PRODUCTSTR
string "Product string"
default "USBdev Serial"
endif
menuconfig USBMSC
bool "USB Mass storage class device"
default n
---help---
References:
"Universal Serial Bus Mass Storage Class, Specification Overview,"
Revision 1.2, USB Implementer's Forum, June 23, 2003.
"Universal Serial Bus Mass Storage Class, Bulk-Only Transport,"
Revision 1.0, USB Implementer's Forum, September 31, 1999.
"SCSI Primary Commands - 3 (SPC-3)," American National Standard
for Information Technology, May 4, 2005
"SCSI Primary Commands - 4 (SPC-4)," American National Standard
for Information Technology, July 19, 2008
"SCSI Block Commands -2 (SBC-2)," American National Standard
for Information Technology, November 13, 2004
"SCSI Multimedia Commands - 3 (MMC-3)," American National Standard
for Information Technology, November 12, 2001
if USBMSC
config USBMSC_COMPOSITE
bool "Mass storage composite support"
default n
depends on USBDEV_COMPOSITE
---help---
Configure the mass storage driver as part of a composite driver
(only if CONFIG_USBDEV_COMPOSITE is also defined)
config USBMSC_IFNOBASE
int "Offset the mass storage interface number"
default 2
depends on USBMSC_COMPOSITE
---help---
If the CDC driver is part of a composite device, then this may need to
be defined to offset the mass storage interface number so that it is
unique and contiguous. When used with the CDC/ACM driver, the
correct value for this offset is two (because of the two CDC/ACM
interfaces that will precede it).
config USBMSC_STRBASE
int "Offset the mass storage string numbers"
default 2
depends on USBMSC_COMPOSITE
---help---
If the CDC driver is part of a composite device, then this may need to
be defined to offset the mass storage string numbers so that they are
unique and contiguous. When used with the CDC/ACM driver, the
correct value for this offset is four (or perhaps 5 or 6, depending
on if CONFIG_CDCACM_NOTIFSTR or CONFIG_CDCACM_DATAIFSTR are defined).
config USBMSC_EP0MAXPACKET
int "Max packet size for endpoint 0"
default 64
---help---
Max packet size for endpoint 0
config USBMSC_EPBULKOUT
int "Endpoint bulk out"
default 0
---help---
The logical 7-bit address of a hardware endpoints that support
bulk OUT and IN operations
config USBMSC_EPBULKIN
int "Endpoint bulk in"
default 0
---help---
The logical 7-bit address of a hardware endpoints that support
bulk OUT and IN operations
config USBMSC_NWRREQS
int "The number of write requests that can be in flight"
default 4
---help---
The number of write/read requests that can be in flight
config USBMSC_NRDREQS
int "The number of read requests that can be in flight"
default 4
---help---
The number of write/read requests that can be in flight
config USBMSC_BULKINREQLEN
int "Bulk in request size"
default 512
config USBMSC_BULKOUTREQLEN
int "Bulk out request size"
default 512
---help---
The size of the buffer in each write/read request. This
value needs to be at least as large as the endpoint
maxpacket and ideally as large as a block device sector.
config USBMSC_VENDORID
hex "Mass stroage Vendor ID"
default 0x00
config USBMSC_VENDORSTR
string "Mass stroage vendor string"
default "Nuttx"
---help---
The vendor ID code/string
config USBMSC_PRODUCTID
hex "Mass stroage Product ID"
default 0x00
config USBMSC_PRODUCTSTR
string "Mass stroage product string"
default "Mass stroage"
config USBMSC_VERSIONNO
hex "USB MSC Version Number"
default "0x399"
config USBMSC_REMOVABLE
bool "Mass stroage remove able"
default n
---help---
Select if the media is removable
USB Composite Device Configuration
endif