px4-firmware/msg/ekf2_replay.msg

49 lines
2.5 KiB
Plaintext

uint64 time_ref # ekf2 reference time. This is a timestamp passed to the
# estimator which it uses a absolute reference.
uint64 gyro_integral_dt # gyro integration period in us
uint64 accelerometer_integral_dt # accelerometer integration period in us
uint64 magnetometer_timestamp # timestamp of magnetometer measurement in us
uint64 baro_timestamp # timestamp of barometer measurement in us
uint64 rng_timestamp # timestamp of range finder measurement in us
uint64 flow_timestamp # timestamp of optical flow measurement in us
uint64 asp_timestamp # timestamp of airspeed measurement in us
float32[3] gyro_integral_rad # integrated gyro vector in rad
float32[3] accelerometer_integral_m_s # integrated accelerometer vector in m/s
float32[3] magnetometer_ga # magnetometer measurement vector (body fixed NED) in ga
float32 baro_alt_meter # barometer altitude measurement in m
uint64 time_usec # timestamp of gps position measurement in us
uint64 time_usec_vel # timestamp of gps velocity measurement in us
int32 lat # Latitude in 1E-7 degrees
int32 lon # Longitude in 1E-7 degrees
int32 alt # Altitude in 1E-3 meters above MSL, (millimetres)
uint8 fix_type
uint8 nsats # number of GPS satellites used by the receiver
float32 eph # GPS horizontal position accuracy (metres)
float32 epv # GPS vertical position accuracy (metres)
float32 sacc # GPS speed accuracy (metres/sec)
float32 vel_m_s # GPS ground speed, (metres/sec)
float32 vel_n_m_s # GPS North velocity, (metres/sec)
float32 vel_e_m_s # GPS East velocity, (metres/sec)
float32 vel_d_m_s # GPS Down velocity, (metres/sec)
bool vel_ned_valid # True if NED velocity is valid
# range finder measurements
float32 range_to_ground # range finder measured range to ground (m)
# optical flow sensor measurements
float32[2] flow_pixel_integral # integrated optical flow rate around x and y axes (rad)
float32[2] flow_gyro_integral # integrated gyro rate around x and y axes (rad)
uint32 flow_time_integral # integration timespan (usec)
uint8 flow_quality # Quality of accumulated optical flow data (0 - 255)
# airspeed
float32 indicated_airspeed_m_s # indicated airspeed in meters per second, -1 if unknown
float32 true_airspeed_m_s # true filtered airspeed in meters per second, -1 if unknown
float32 true_airspeed_unfiltered_m_s # true airspeed in meters per second, -1 if unknown
float32 air_temperature_celsius # air temperature in degrees celsius, -1000 if unknown
float32 confidence # confidence value from 0 to 1 for this sensor