David Sidrane e90e8ae0ea Intial Commit PX4 FMUV6RT ... nxp/rt117x:Fix Pin IRQ nxp/rt117x:Support 4 i2c busses nxp/rt117x:Add px4io_serial support nxp/imxrt:Expand ToneAlarmInterface to GPT 3 & 4 px4_fmu-6xrt:Using imxrt_flexspi_nor_octal px4_fmu-6xrt:Entry is start px4_fmu-6xrt:Add Proper MTD px4_fmu-6xrt:Set I2C Buses px4_fmu-6xrt:Proper SPI usage px4_fmu-6xrt:Adjust memory Map to use the 2 MB px4_fmu-6xrt:Bring in ROMAPI px4_fmu-6xrt:Push FLASH to 200Mhz px4_fmu-6xrt:Use BOARD_I2C_LATEINIT px4_fmu-6xrt:Clock Config remove unused devices px4_fmu-6xrt:Remove EVK SDRAM IO px4_fmu-6xrt:Enable SE550 using HW_VER_REV_DRIVE px4_fmu-6xrt:Use MTD to mount FRAM on Flex SPI px4_fmu-6xrt:Manifest px4_fmu-6xrt:Restore board_peripheral_reset px4_fmu-6xrt:Set I2C buss Interna/Externa and startup nxp/rt117x:Set 6 I2C busses px4_fmu-6xrt:Correct Clock Sources and Freqency Settings px4_fmu-6xrt:Correct ADC Settings px4_fmu-6xrt:Tune FlexSPI config and sync header with debug variant Linker prep for rodata ahb partitioning px4_fmu-6xrt:FlexSPI prefetch partition split .text and .rodata Current config 1KB Prefetch .rodata 3KB Prefetch .text px4_fmu-6xrt:Run imxrt_flash_setup_prefetch_partition from ram with barriers px4_fmu-6xrt:Use All OCTL setting from FLASH g_flash_config SANS lookupTable px4_fmu-6xrt:Octal spi boot/debug problem bypass px4_fmu-6xrt:Add PWM test px4_fmu-6xrt:Fix clockconfig and USB vbus sense px4_fmu-6xrt: Use TCM px4_fmu-6xrt: Ethernet bringup imxrt: use unique_id register for board_identity px4_fmu-6xrt: update ITCM mapping, todo proper trap on pc hitting 0x0 px4_fmu-6xrt:correct rotation icm42688p onboard imu rt117x: Add SSARC HP RAM driver for memory dumps px4_fmu-6xrt: Enable hardfault_log px4_fmu-6xrt: Enable DMA pool px4_fmu-6xrt: fix uart mapping px4_fmu-6xrt: enable SocketCAN & DroneCAN px4_fmu-6xrt:Command line history TAB completion px4_fmu-6xrt:Fix pinning duplication px4_fmu-6xrt:Support conditional PHY address based on selected PHY px4_fmu-6xrt:Add Pull Downs on CTS, use GPIO for RTS px4_fmu-6xrt:Set TelemN TX Slew rate and Drive Strenth to max px4_fmu-6xrt::Set TELEM Buffers add HW HS px4_fmu-6xrt:Turn off DMA poll px4_fmu-6xrt:RC_SERIAL_PORT needed to be px4io to disable rc_input using TELEM2! px4_fmu-6xrt: bootloader (#22228) * imxrt:Add bootloader support * bootloader:imxrt clear BOOT_RTC_SIGNATURE * px4_fmu-6xrt:Add bootloader * px4_fmu-6xrt:bootloader removed ADC * px4_fmu-6xrt:bootloader base bootloader script off of script.ld * px4_fmu-6xrt:add _bootdelay_signature & change entry from 0x30000000 to 0x30040000 * px4_fmu-6xrt:hw_config Bootloader has to have 12 bytes px4_fmu-6xrt:Default to use LAN8742A PHY px4_fmu-v6xrt:VID Set to Drone Code board_reset:Enable ability to write RTC GP regs px4_fmu-6xrt:Fix CMP0079 error rt117x:micro_hal Add a PX4_MAKE_GPIO_PULLED_INPUT px4_fmu-v6xrt:Set CTS High before VDD_5V applided to ports to avoid radios fro entering bootloaders fmu-v6xrt: increase 5v down time fmu-v6xrt:Ready for Release DEBUGASSERTS off and Console 57600, Bootloder updated. imxrt:board_hw_rev_ver Rework for 3.893V Ref px4_fmu-v6xrt:Move ADC to Port3		2023-11-15 11:10:47 -05:00
..
Jenkinsfile-compile	Intial Commit PX4 FMUV6RT	2023-11-15 11:10:47 -05:00
Jenkinsfile-hardware	Revert "jenkins ci: listener topic list update"	2023-07-25 18:39:28 -04:00