px4-firmware

dark0707

History

patacongo c5d9112de1 Add tools/link.bat, unlink.bat, and copydir.bat git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5419 42af7a65-404d-4744-a932-0658087f49c3		2012-12-08 16:37:43 +00:00
..
include	Resync new repository with old repo r5166	2012-09-17 18:18:44 +00:00
nsh	Add tools/link.bat, unlink.bat, and copydir.bat	2012-12-08 16:37:43 +00:00
ostest	Add tools/link.bat, unlink.bat, and copydir.bat	2012-12-08 16:37:43 +00:00
scripts	Massive clean-up of linker scripts from Freddie Chopin	2012-11-04 17:18:25 +00:00
src	Missing comma in EVERY DELFILE/DELDIR macro call in every Makefile	2012-11-20 15:47:41 +00:00
Kconfig	Resync new repository with old repo r5166	2012-09-17 18:18:44 +00:00
README.txt	Resync new repository with old repo r5166	2012-09-17 18:18:44 +00:00

README.txt

There's not much here:

EXT1 - P3 0:7 are used for LEDs.

UEXT pin 3/4 -TXD2/RXD2- is UART2.

The board I have has the revision '-' of LPC2378 even though I got the board
more than 2 years after the chip revision was released :-( .
I can't get Nuttx to work if I fully enabled the MAM.

I used FTDI ft232 usb-serial with nsh piping as seen on the screenshot.