forked from Archive/PX4-Autopilot
154 lines
5.3 KiB
Plaintext
154 lines
5.3 KiB
Plaintext
PX4 mixer definitions
|
|
=====================
|
|
|
|
Files in this directory implement example mixers that can be used as a basis
|
|
for customisation, or for general testing purposes.
|
|
|
|
Mixer basics
|
|
------------
|
|
|
|
Mixers combine control values from various sources (control tasks, user inputs,
|
|
etc.) and produce output values suitable for controlling actuators; servos,
|
|
motors, switches and so on.
|
|
|
|
An actuator derives its value from the combination of one or more control
|
|
values. Each of the control values is scaled according to the actuator's
|
|
configuration and then combined to produce the actuator value, which may then be
|
|
further scaled to suit the specific output type.
|
|
|
|
Internally, all scaling is performed using floating point values. Inputs and
|
|
outputs are clamped to the range -1.0 to 1.0.
|
|
|
|
control control control
|
|
| | |
|
|
v v v
|
|
scale scale scale
|
|
| | |
|
|
| v |
|
|
+-------> mix <------+
|
|
|
|
|
scale
|
|
|
|
|
v
|
|
out
|
|
|
|
Scaling
|
|
-------
|
|
|
|
Basic scalers provide linear scaling of the input to the output.
|
|
|
|
Each scaler allows the input value to be scaled independently for inputs
|
|
greater/less than zero. An offset can be applied to the output, and lower and
|
|
upper boundary constraints can be applied. Negative scaling factors cause the
|
|
output to be inverted (negative input produces positive output).
|
|
|
|
Scaler pseudocode:
|
|
|
|
if (input < 0)
|
|
output = (input * NEGATIVE_SCALE) + OFFSET
|
|
else
|
|
output = (input * POSITIVE_SCALE) + OFFSET
|
|
|
|
if (output < LOWER_LIMIT)
|
|
output = LOWER_LIMIT
|
|
if (output > UPPER_LIMIT)
|
|
output = UPPER_LIMIT
|
|
|
|
Syntax
|
|
------
|
|
|
|
Mixer definitions are text files; lines beginning with a single capital letter
|
|
followed by a colon are significant. All other lines are ignored, meaning that
|
|
explanatory text can be freely mixed with the definitions.
|
|
|
|
Each file may define more than one mixer; the allocation of mixers to actuators
|
|
is specific to the device reading the mixer definition, and the number of
|
|
actuator outputs generated by a mixer is specific to the mixer.
|
|
|
|
A mixer begins with a line of the form
|
|
|
|
<tag>: <mixer arguments>
|
|
|
|
The tag selects the mixer type; 'M' for a simple summing mixer, 'R' for a
|
|
multirotor mixer, etc.
|
|
|
|
Null Mixer
|
|
..........
|
|
|
|
A null mixer consumes no controls and generates a single actuator output whose
|
|
value is always zero. Typically a null mixer is used as a placeholder in a
|
|
collection of mixers in order to achieve a specific pattern of actuator outputs.
|
|
|
|
The null mixer definition has the form:
|
|
|
|
Z:
|
|
|
|
Simple Mixer
|
|
............
|
|
|
|
A simple mixer combines zero or more control inputs into a single actuator
|
|
output. Inputs are scaled, and the mixing function sums the result before
|
|
applying an output scaler.
|
|
|
|
A simple mixer definition begins with:
|
|
|
|
M: <control count>
|
|
O: <-ve scale> <+ve scale> <offset> <lower limit> <upper limit>
|
|
|
|
If <control count> is zero, the sum is effectively zero and the mixer will
|
|
output a fixed value that is <offset> constrained by <lower limit> and <upper
|
|
limit>.
|
|
|
|
The second line defines the output scaler with scaler parameters as discussed
|
|
above. Whilst the calculations are performed as floating-point operations, the
|
|
values stored in the definition file are scaled by a factor of 10000; i.e. an
|
|
offset of -0.5 is encoded as -5000.
|
|
|
|
The definition continues with <control count> entries describing the control
|
|
inputs and their scaling, in the form:
|
|
|
|
S: <group> <index> <-ve scale> <+ve scale> <offset> <lower limit> <upper limit>
|
|
|
|
The <group> value identifies the control group from which the scaler will read,
|
|
and the <index> value an offset within that group. These values are specific to
|
|
the device reading the mixer definition.
|
|
|
|
When used to mix vehicle controls, mixer group zero is the vehicle attitude
|
|
control group, and index values zero through three are normally roll, pitch,
|
|
yaw and thrust respectively.
|
|
|
|
The remaining fields on the line configure the control scaler with parameters as
|
|
discussed above. Whilst the calculations are performed as floating-point
|
|
operations, the values stored in the definition file are scaled by a factor of
|
|
10000; i.e. an offset of -0.5 is encoded as -5000.
|
|
|
|
Multirotor Mixer
|
|
................
|
|
|
|
The multirotor mixer combines four control inputs (roll, pitch, yaw, thrust)
|
|
into a set of actuator outputs intended to drive motor speed controllers.
|
|
|
|
The mixer definition is a single line of the form:
|
|
|
|
R: <geometry> <roll scale> <pitch scale> <yaw scale> <deadband>
|
|
|
|
The supported geometries include:
|
|
|
|
4x - quadrotor in X configuration
|
|
4+ - quadrotor in + configuration
|
|
6x - hexcopter in X configuration
|
|
6+ - hexcopter in + configuration
|
|
8x - octocopter in X configuration
|
|
8+ - octocopter in + configuration
|
|
|
|
Each of the roll, pitch and yaw scale values determine scaling of the roll,
|
|
pitch and yaw controls relative to the thrust control. Whilst the calculations
|
|
are performed as floating-point operations, the values stored in the definition
|
|
file are scaled by a factor of 10000; i.e. an factor of 0.5 is encoded as 5000.
|
|
|
|
Roll, pitch and yaw inputs are expected to range from -1.0 to 1.0, whilst the
|
|
thrust input ranges from 0.0 to 1.0. Output for each actuator is in the
|
|
range -1.0 to 1.0.
|
|
|
|
In the case where an actuator saturates, all actuator values are rescaled so that
|
|
the saturating actuator is limited to 1.0. |