forked from Archive/PX4-Autopilot
112 lines
3.8 KiB
Plaintext
112 lines
3.8 KiB
Plaintext
README.txt
|
|
^^^^^^^^^^
|
|
|
|
ZDS-II Compiler Versions
|
|
^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
Different configurations have been build for this board using ZDS-11
|
|
Versions 4.11.0, 4.11.1, and 5.1.1 You have to check the files */Make.defs
|
|
to see how the build is configured: Check the definitions of
|
|
ZDSVERSION (if present) and ZDSINSTALLDIR.
|
|
|
|
NOTE: Different versions of the ZDS-II compiler may also require
|
|
different versions of .linkcmd and .zdsproj files as well.
|
|
|
|
Version 4.11.0
|
|
|
|
The 5.1.1 version of the ZDS-II tools are currently configured for
|
|
all ez80 boards. However, it is the older version 4.11.0 that this code
|
|
has been verified against.
|
|
|
|
Although it compiles without error, the 4.11.0 compiler generates
|
|
bad code on one of the files, mm/mm_initialize.c. Below is a simple work-
|
|
around.
|
|
|
|
--- mm/mm_initialize.c.SAVE 2008-02-13 08:06:46.833857700 -0600
|
|
+++ mm/mm_initialize.c 2008-02-13 08:07:26.367608900 -0600
|
|
@@ -94,8 +94,11 @@
|
|
{
|
|
int i;
|
|
|
|
+#if 0 /* DO NOT CHECK IN */
|
|
CHECK_ALLOCNODE_SIZE;
|
|
CHECK_FREENODE_SIZE;
|
|
+#endif
|
|
|
|
/* Set up global variables */
|
|
|
|
UPDATE: I don't know if 4.11.1 has this same problem (I bet not since
|
|
I submitted the bug to ZiLOG), but I have permanently worked around the
|
|
above problem for all ZiLOG compilers.
|
|
|
|
Version 5.1.1
|
|
|
|
On June 22, 2011 I verified that these configurations build successfully
|
|
with the 5.1.1 ZDS-II version. On November 12, 2012, all of the configurations
|
|
were converted to use 5.1.1, but have not been verified on a running target.
|
|
|
|
The above kludge for 4.11.0 is not required with 5.1.1.
|
|
|
|
Paths were also updated that are specific to a 32-bit toolchain running on
|
|
a 64 bit windows platform. Change to a different toolchain, you will need
|
|
to modify the versioning in Make.defs and setenv.sh; if you want to build
|
|
on a different platform, you will need to change the path in the ZDS binaries
|
|
in those same files.
|
|
|
|
Other Versions
|
|
If you use any version of ZDS-II other than 5.1.1 or if you install ZDS-II
|
|
at any location other than the default location, you will have to modify
|
|
two files: (1) configs/ez80f910200kitg/*/setenv.sh and (2)
|
|
configs/ez80f910200kitg/*/Make.defs.
|
|
|
|
Configuration Subdirectories
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
src/ and include/
|
|
These directories contain common logic for all ez80f910200zco
|
|
configurations.
|
|
|
|
Variations on the basic ez80f910200zco configuration are maintained
|
|
in subdirectories. To configure any specific configuration, do the
|
|
following steps:
|
|
|
|
cd <nuttx-top-directory>/tools
|
|
./configure.sh ez80f910200zco/<sub-directory>
|
|
cd <nuttx-top-directgory>
|
|
make
|
|
|
|
Where <sub-directory> is the specific board configuration that you
|
|
wish to build. The following board-specific configurations are
|
|
available:
|
|
|
|
dhcpd:
|
|
This builds the DCHP server using the examples/dhcpd application
|
|
(for execution from FLASH.) See examples/README.txt for information
|
|
about the dhcpd example.
|
|
|
|
httpd:
|
|
This builds the uIP web server example using the examples/uip application
|
|
(for execution from FLASH). See examples/README.txt for information
|
|
about ostest.
|
|
|
|
ostest
|
|
This builds the examples/ostest application for execution from FLASH.
|
|
See examples/README.txt for information about ostest.
|
|
|
|
nsh
|
|
This configuratino builds the NuttShell (NSH). That code can be
|
|
found in examples/nsh. For more information see: examples/nsh/README.txt
|
|
and Documentation/NuttShell.html.
|
|
|
|
nettest
|
|
This configuration is used for testing the eZ80F91 EMAC driver. It
|
|
builds examples/nettest. See examples/README.txt for more information
|
|
about nettest.
|
|
|
|
poll
|
|
This configuration is also used for testing the eZ80F91 EMAC driver. It
|
|
builds examples/poll. See examples/README.txt for more information
|
|
about the poll test.
|
|
|
|
Check out any README.txt files in these <sub-directory>s.
|