px4-firmware/msg/ekf_gps_position.msg

20 lines
1.4 KiB
Plaintext

# EKF blended position in WGS84 coordinates.
uint64 timestamp # time since system start (microseconds)
int32 lat # Latitude in 1E-7 degrees
int32 lon # Longitude in 1E-7 degrees
int32 alt # Altitude in 1E-3 meters above MSL, (millimetres)
int32 alt_ellipsoid # Altitude in 1E-3 meters bove Ellipsoid, (millimetres)
float32 s_variance_m_s # GPS speed accuracy estimate, (metres/sec)
uint8 fix_type # 0-1: no fix, 2: 2D fix, 3: 3D fix, 4: RTCM code differential, 5: Real-Time Kinematic, float, 6: Real-Time Kinematic, fixed, 8: Extrapolated. Some applications will not use the value of this field unless it is at least two, so always correctly fill in the fix.
float32 eph # GPS horizontal position accuracy (metres)
float32 epv # GPS vertical position accuracy (metres)
float32 vel_m_s # GPS ground speed, (metres/sec)
float32 vel_n_m_s # GPS North velocity, (metres/sec)
float32 vel_e_m_s # GPS East velocity, (metres/sec)
float32 vel_d_m_s # GPS Down velocity, (metres/sec)
bool vel_ned_valid # True if NED velocity is valid
uint8 satellites_used # Number of satellites used
float32 heading # heading angle of XYZ body frame rel to NED. Set to NaN if not available and updated (used for dual antenna GPS), (rad, [-PI, PI])
float32 heading_offset # heading offset of dual antenna array in body frame. Set to NaN if not applicable. (rad, [-PI, PI])
uint8 selected # GPS selection: 0: GPS1, 1: GPS2. 2: GPS1+GPS2 blend