px4-firmware/nuttx/tools/configure.bat

128 lines
4.1 KiB
Batchfile

@echo off
rem tools/configure.bat
rem
rem Copyright (C) 2012 Gregory Nutt. All rights reserved.
rem Author: Gregory Nutt <gnutt@nuttx.org>
rem
rem Redistribution and use in source and binary forms, with or without
rem modification, are permitted provided that the following conditions
rem are met:
rem
rem 1. Redistributions of source code must retain the above copyright
rem notice, this list of conditions and the following disclaimer.
rem 2. Redistributions in binary form must reproduce the above copyright
rem notice, this list of conditions and the following disclaimer in
rem the documentation and/or other materials provided with the
rem distribution.
rem 3. Neither the name NuttX nor the names of its contributors may be
rem used to endorse or promote products derived from this software
rem without specific prior written permission.
rem
rem THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
rem "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
rem LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
rem FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
rem COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
rem INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
rem BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
rem OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
rem AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
rem LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
rem ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
rem POSSIBILITY OF SUCH DAMAGE.
rem
rem Parse command line arguments
set debug=
set fmt=-w
set posix=
set help=
set appdir=
set config=
:ArgLoop
if "%1"=="" goto :NoConfig
if "%1"=="-h" goto :ShowUsage
if "%1"=="-d" goto :SetDebug
if "%1"=="-w" goto :SetWindows
if "%1"=="-l" goto :SetPosix
if "%1"=="-a" goto :SetAppDir
set config=%1
goto EndOfLoop
:SetDebug
set debug=-d
goto :NextArg
:SetWindows
set fmt=-w
goto :NextArg
:SetWindows
set fmt=-l
goto :NextArg
:SetAppDir
shift
set appdir=-a %1
:NextArg
shift
goto :ArgLoop
:EndOfLoop
rem Check if we have to build configure.exe
if exist configure.exe goto :HaveConfigureExe
set cc=mingw32-gcc.exe
set cflags=-Wall -Wstrict-prototypes -Wshadow -g -pipe -I. -DCONFIG_WINDOWS_NATIVE=y
%cc% %cflags% -o configure.exe configure.c cfgparser.c
if errorlevel 1 (
echo ERROR: %cc% failed
echo Is ming32-gcc.exe installed? Is it in the PATH variable?
goto End
)
:HaveConfigureExe
configure.exe %debug% %fmt% %appdir% %config%
if errorlevel 1 echo configure.exe failed
goto End
:NoConfig
echo Missing ^<board-name^>/^<config-name^> argument
:ShowUsage
echo USAGE: %0 [-d] [-w] [-l] [-h] [-a ^<app-dir^>] ^<board-name^>\^<config-name^>
echo\nWhere:
echo ^<board-name^>:
echo Identifies the board. This must correspond to a board directory
echo under nuttx/configs/.
echo ^<config-name^>:
echo Identifies the specific configuratin for the selected ^<board-name^>.
echo This must correspond to a sub-directory under the board directory at
echo under nuttx/configs/^<board-name^>/.
echo ^<-d^>:
echo Enables debug output
echo ^<-w^>:
echo Informs the tool that it should use Windows style paths like C:\\Program Files
echo instead of POSIX style paths are used like /usr/local/bin. Windows
echo style paths are used by default.
echo ^<-l^>:
echo Informs the tool that it should use POSIX style paths like /usr/local/bin.
echo By default, Windows style paths like C:\\Program Files are used.
echo -a ^<app-dir^>:
echo Informs the configuration tool where the application build
echo directory. This is a relative path from the top-level NuttX
echo build directory. But default, this tool will look in the usual
echo places to try to locate the application directory: ../apps or
echo ../apps-xx.yy where xx.yy is the NuttX version number.
echo ^<-h^>:
echo Prints this message and exits.
:End