forked from Archive/PX4-Autopilot
27 lines
1.6 KiB
Plaintext
27 lines
1.6 KiB
Plaintext
#
|
|
# Sensor corrections in SI-unit form for the voted sensor
|
|
#
|
|
|
|
uint64 timestamp # time since system start (microseconds)
|
|
|
|
# Corrections for gyro angular rate outputs where corrected_rate = raw_rate * gyro_scale + gyro_offset
|
|
# Note the corrections are in the sensor frame and must be applied before the sensor data is rotated into body frame
|
|
uint32[3] gyro_device_ids
|
|
float32[3] gyro_offset_0 # gyro 0 XYZ offsets in the sensor frame in rad/s
|
|
float32[3] gyro_offset_1 # gyro 1 XYZ offsets in the sensor frame in rad/s
|
|
float32[3] gyro_offset_2 # gyro 2 XYZ offsets in the sensor frame in rad/s
|
|
|
|
# Corrections for acceleromter acceleration outputs where corrected_accel = raw_accel * accel_scale + accel_offset
|
|
# Note the corrections are in the sensor frame and must be applied before the sensor data is rotated into body frame
|
|
uint32[3] accel_device_ids
|
|
float32[3] accel_offset_0 # accelerometer 0 XYZ offsets in the sensor frame in m/s/s
|
|
float32[3] accel_offset_1 # accelerometer 1 XYZ offsets in the sensor frame in m/s/s
|
|
float32[3] accel_offset_2 # accelerometer 2 XYZ offsets in the sensor frame in m/s/s
|
|
|
|
# Corrections for barometric pressure outputs where corrected_pressure = raw_pressure * pressure_scale + pressure_offset
|
|
# Note the corrections are in the sensor frame and must be applied before the sensor data is rotated into body frame
|
|
uint32[3] baro_device_ids
|
|
float32 baro_offset_0 # barometric pressure 0 offsets in the sensor frame in m/s/s
|
|
float32 baro_offset_1 # barometric pressure 1 offsets in the sensor frame in m/s/s
|
|
float32 baro_offset_2 # barometric pressure 2 offsets in the sensor frame in m/s/s
|