forked from Archive/PX4-Autopilot
605 lines
13 KiB
Plaintext
605 lines
13 KiB
Plaintext
############################################################################
|
|
# configs/lpc4330-xplorer/nsh/defconfig
|
|
#
|
|
# Copyright (C) 2012 Gregory Nutt. All rights reserved.
|
|
# Author: Gregory Nutt <gnutt@nuttx.org>
|
|
#
|
|
# Redistribution and use in source and binary forms, with or without
|
|
# modification, are permitted provided that the following conditions
|
|
# are met:
|
|
#
|
|
# 1. Redistributions of source code must retain the above copyright
|
|
# notice, this list of conditions and the following disclaimer.
|
|
# 2. Redistributions in binary form must reproduce the above copyright
|
|
# notice, this list of conditions and the following disclaimer in
|
|
# the documentation and/or other materials provided with the
|
|
# distribution.
|
|
# 3. Neither the name NuttX nor the names of its contributors may be
|
|
# used to endorse or promote products derived from this software
|
|
# without specific prior written permission.
|
|
#
|
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
# POSSIBILITY OF SUCH DAMAGE.
|
|
#
|
|
############################################################################
|
|
#
|
|
# Architecture Selection
|
|
#
|
|
CONFIG_ARCH="arm"
|
|
CONFIG_ARCH_ARM=y
|
|
CONFIG_ARCH_CORTEXM4=y
|
|
CONFIG_ARCH_CHIP="lpc43xx"
|
|
CONFIG_ARCH_CHIP_LPC43XX=y
|
|
CONFIG_ARCH_CHIP_LPC4330FET100=y
|
|
CONFIG_ARCH_BOARD="lpc4330-xplorer"
|
|
CONFIG_ARCH_BOARD_LPC4330_XPLORER=y
|
|
CONFIG_BOARD_LOOPSPERMSEC=18535
|
|
CONFIG_DRAM_SIZE=73728
|
|
CONFIG_DRAM_START=0x10080000
|
|
CONFIG_ARCH_IRQPRIO=y
|
|
CONFIG_ARCH_FPU=n
|
|
CONFIG_ARCH_INTERRUPTSTACK=n
|
|
CONFIG_ARCH_STACKDUMP=y
|
|
CONFIG_ARCH_BOOTLOADER=n
|
|
CONFIG_ARCH_LEDS=y
|
|
CONFIG_ARCH_BUTTONS=n
|
|
CONFIG_ARCH_CALIBRATION=n
|
|
CONFIG_ARCH_DMA=n
|
|
CONFIG_ARMV7M_CMNVECTOR=y
|
|
|
|
#
|
|
# Execution address space
|
|
#
|
|
CONFIG_BOOT_SRAM=y
|
|
CONFIG_BOOT_SPIFI=n
|
|
CONFIG_BOOT_FLASHA=n
|
|
CONFIG_BOOT_FLASHB=n
|
|
CONFIG_BOOT_CS0FLASH=n
|
|
CONFIG_BOOT_CS1FLASH=n
|
|
CONFIG_BOOT_CS2FLASH=n
|
|
CONFIG_BOOT_CS3FLASH=n
|
|
|
|
#
|
|
# Identify toolchain and linker options
|
|
#
|
|
CONFIG_LPC43_CODEREDW=y
|
|
CONFIG_LPC43_CODESOURCERYW=n
|
|
CONFIG_LPC43_CODESOURCERYL=n
|
|
CONFIG_LPC43_ATOLLIC_LITE=n
|
|
CONFIG_LPC43_ATOLLIC_PRO=n
|
|
CONFIG_LPC43_DEVKITARM=n
|
|
CONFIG_LPC43_BUILDROOT=n
|
|
|
|
CONFIG_ARCH_STDARG_H=y
|
|
|
|
#
|
|
# Individual subsystems can be enabled:
|
|
#
|
|
CONFIG_LPC43_ADC0=n
|
|
CONFIG_LPC43_ADC1=n
|
|
CONFIG_LPC43_ATIMER=n
|
|
CONFIG_LPC43_CAN1=n
|
|
CONFIG_LPC43_CAN2=n
|
|
CONFIG_LPC43_DAC=n
|
|
CONFIG_LPC43_EMC=n
|
|
CONFIG_LPC43_ETHERNET=n
|
|
CONFIG_LPC43_EVNTMNTR=n
|
|
CONFIG_LPC43_GPDMA=n
|
|
CONFIG_LPC43_I2C0=n
|
|
CONFIG_LPC43_I2C1=n
|
|
CONFIG_LPC43_I2S0=n
|
|
CONFIG_LPC43_I2S1=n
|
|
CONFIG_LPC43_LCD=n
|
|
CONFIG_LPC43_MCPWM=n
|
|
CONFIG_LPC43_QEI=n
|
|
CONFIG_LPC43_RIT=n
|
|
CONFIG_LPC43_RTC=n
|
|
CONFIG_LPC43_SCT=n
|
|
CONFIG_LPC43_SDMMC=n
|
|
CONFIG_LPC43_SPI=n
|
|
CONFIG_LPC43_SPIFI=n
|
|
CONFIG_LPC43_SSP0=n
|
|
CONFIG_LPC43_SSP1=n
|
|
CONFIG_LPC43_TMR0=n
|
|
CONFIG_LPC43_TMR1=n
|
|
CONFIG_LPC43_TMR2=n
|
|
CONFIG_LPC43_TMR3=n
|
|
CONFIG_LPC43_USART0=y
|
|
CONFIG_LPC43_UART1=n
|
|
CONFIG_LPC43_USART2=n
|
|
CONFIG_LPC43_USART3=n
|
|
CONFIG_LPC43_USB0=n
|
|
CONFIG_LPC43_USB1=n
|
|
CONFIG_LPC43_USB1_ULPI=n
|
|
CONFIG_LPC43_WWDT=n
|
|
|
|
#
|
|
# LPC43xx specific serial device driver settings
|
|
#
|
|
CONFIG_SERIAL_TERMIOS=n
|
|
|
|
CONFIG_USART0_SERIAL_CONSOLE=y
|
|
CONFIG_UART1_SERIAL_CONSOLE=n
|
|
CONFIG_USART2_SERIAL_CONSOLE=n
|
|
CONFIG_USART3_SERIAL_CONSOLE=n
|
|
|
|
CONFIG_USART0_TXBUFSIZE=256
|
|
CONFIG_UART1_TXBUFSIZE=256
|
|
CONFIG_USART2_TXBUFSIZE=256
|
|
CONFIG_USART3_TXBUFSIZE=256
|
|
|
|
CONFIG_USART0_RXBUFSIZE=256
|
|
CONFIG_UART1_RXBUFSIZE=256
|
|
CONFIG_USART2_RXBUFSIZE=256
|
|
CONFIG_USART3_RXBUFSIZE=256
|
|
|
|
CONFIG_USART0_BAUD=115200
|
|
CONFIG_UART1_BAUD=115200
|
|
CONFIG_USART2_BAUD=115200
|
|
CONFIG_USART3_BAUD=115200
|
|
|
|
CONFIG_USART0_BITS=8
|
|
CONFIG_UART1_BITS=8
|
|
CONFIG_USART2_BITS=8
|
|
CONFIG_USART3_BITS=8
|
|
|
|
CONFIG_USART0_PARITY=0
|
|
CONFIG_UART1_PARITY=0
|
|
CONFIG_USART2_PARITY=0
|
|
CONFIG_USART3_PARITY=0
|
|
|
|
CONFIG_USART0_2STOP=0
|
|
CONFIG_UART1_2STOP=0
|
|
CONFIG_USART2_2STOP=0
|
|
CONFIG_USART3_2STOP=0
|
|
|
|
#
|
|
CONFIG_USART0_RS485MODE=n
|
|
CONFIG_USART2_RS485MODE=n
|
|
CONFIG_USART3_RS485MODE=n
|
|
|
|
#
|
|
# LPC43xx specific PHY/Ethernet device driver settings
|
|
#
|
|
CONFIG_PHY_KS8721=y
|
|
CONFIG_PHY_AUTONEG=y
|
|
CONFIG_PHY_SPEED100=n
|
|
CONFIG_PHY_FDUPLEX=y
|
|
|
|
#
|
|
# I2C configuration
|
|
#
|
|
CONFIG_I2C=n
|
|
CONFIG_I2C_POLLED=y
|
|
CONFIG_I2C_TRANSFER=y
|
|
CONFIG_I2C_TRACE=n
|
|
|
|
#
|
|
# General build options
|
|
#
|
|
CONFIG_RRLOAD_BINARY=n
|
|
CONFIG_INTELHEX_BINARY=n
|
|
CONFIG_MOTOROLA_SREC=n
|
|
CONFIG_RAW_BINARY=y
|
|
CONFIG_HAVE_LIBM=n
|
|
|
|
#
|
|
# General OS setup
|
|
#
|
|
CONFIG_USER_ENTRYPOINT="nsh_main"
|
|
CONFIG_DEBUG=n
|
|
CONFIG_DEBUG_VERBOSE=n
|
|
CONFIG_DEBUG_SYMBOLS=n
|
|
CONFIG_DEBUG_SCHED=n
|
|
CONFIG_DEBUG_FS=n
|
|
|
|
CONFIG_HAVE_CXX=n
|
|
CONFIG_HAVE_CXXINITIALIZE=n
|
|
CONFIG_MM_REGIONS=2
|
|
CONFIG_ARCH_LOWPUTC=y
|
|
CONFIG_RR_INTERVAL=200
|
|
CONFIG_SCHED_INSTRUMENTATION=n
|
|
CONFIG_TASK_NAME_SIZE=0
|
|
CONFIG_START_YEAR=2012
|
|
CONFIG_START_MONTH=7
|
|
CONFIG_START_DAY=11
|
|
CONFIG_GREGORIAN_TIME=n
|
|
CONFIG_JULIAN_TIME=n
|
|
CONFIG_DEV_CONSOLE=y
|
|
CONFIG_DEV_LOWCONSOLE=n
|
|
CONFIG_MUTEX_TYPES=n
|
|
CONFIG_PRIORITY_INHERITANCE=n
|
|
CONFIG_SEM_PREALLOCHOLDERS=0
|
|
CONFIG_SEM_NNESTPRIO=0
|
|
CONFIG_FDCLONE_DISABLE=n
|
|
CONFIG_FDCLONE_STDIO=n
|
|
CONFIG_SDCLONE_DISABLE=y
|
|
CONFIG_SCHED_WORKQUEUE=n
|
|
CONFIG_SCHED_WORKPRIORITY=192
|
|
CONFIG_SCHED_WORKPERIOD=50000
|
|
CONFIG_SCHED_WORKSTACKSIZE=2048
|
|
CONFIG_SIG_SIGWORK=4
|
|
CONFIG_SCHED_WAITPID=y
|
|
CONFIG_SCHED_ATEXIT=n
|
|
|
|
#
|
|
# System Logging
|
|
#
|
|
|
|
CONFIG_SYSLOG=n
|
|
CONFIG_RAMLOG=n
|
|
CONFIG_RAMLOG_CONSOLE=n
|
|
CONFIG_RAMLOG_SYSLOG=n
|
|
#CONFIG_RAMLOG_NPOLLWAITERS
|
|
#CONFIG_RAMLOG_CONSOLE_BUFSIZE
|
|
|
|
#
|
|
# Settings for NXFLAT
|
|
#
|
|
CONFIG_NXFLAT=n
|
|
CONFIG_NXFLAT_DUMPBUFFER=n
|
|
CONFIG_SYMTAB_ORDEREDBYNAME=y
|
|
|
|
#
|
|
# The following can be used to disable categories of
|
|
# APIs supported by the OS. If the compiler supports
|
|
# weak functions, then it should not be necessary to
|
|
# disable functions unless you want to restrict usage
|
|
# of those APIs.
|
|
#
|
|
# There are certain dependency relationships in these
|
|
# features.
|
|
#
|
|
# o mq_notify logic depends on signals to awaken tasks
|
|
# waiting for queues to become full or empty.
|
|
# o pthread_condtimedwait() depends on signals to wake
|
|
# up waiting tasks.
|
|
#
|
|
CONFIG_DISABLE_CLOCK=n
|
|
CONFIG_DISABLE_POSIX_TIMERS=n
|
|
CONFIG_DISABLE_PTHREAD=n
|
|
CONFIG_DISABLE_SIGNALS=n
|
|
CONFIG_DISABLE_MQUEUE=n
|
|
CONFIG_DISABLE_MOUNTPOINT=n
|
|
CONFIG_DISABLE_ENVIRON=n
|
|
CONFIG_DISABLE_POLL=n
|
|
|
|
#
|
|
# Misc libc settings
|
|
#
|
|
CONFIG_NOPRINTF_FIELDWIDTH=n
|
|
|
|
#
|
|
# Allow for architecture optimized implementations
|
|
#
|
|
# The architecture can provide optimized versions of the
|
|
# following to improve system performance
|
|
#
|
|
CONFIG_ARCH_MEMCPY=n
|
|
CONFIG_ARCH_MEMCMP=n
|
|
CONFIG_ARCH_MEMMOVE=n
|
|
CONFIG_ARCH_MEMSET=n
|
|
CONFIG_ARCH_STRCMP=n
|
|
CONFIG_ARCH_STRCPY=n
|
|
CONFIG_ARCH_STRNCPY=n
|
|
CONFIG_ARCH_STRLEN=n
|
|
CONFIG_ARCH_STRNLEN=n
|
|
CONFIG_ARCH_BZERO=n
|
|
|
|
#
|
|
# Sizes of configurable things (0 disables)
|
|
#
|
|
CONFIG_MAX_TASKS=16
|
|
CONFIG_MAX_TASK_ARGS=4
|
|
CONFIG_NPTHREAD_KEYS=4
|
|
CONFIG_NFILE_DESCRIPTORS=8
|
|
CONFIG_NFILE_STREAMS=8
|
|
CONFIG_NAME_MAX=32
|
|
CONFIG_STDIO_BUFFER_SIZE=256
|
|
CONFIG_STDIO_LINEBUFFER=y
|
|
CONFIG_NUNGET_CHARS=2
|
|
CONFIG_PREALLOC_MQ_MSGS=4
|
|
CONFIG_MQ_MAXMSGSIZE=32
|
|
CONFIG_MAX_WDOGPARMS=2
|
|
CONFIG_PREALLOC_WDOGS=4
|
|
CONFIG_PREALLOC_TIMERS=4
|
|
|
|
#
|
|
# Filesystem configuration
|
|
#
|
|
CONFIG_FS_FAT=y
|
|
CONFIG_FAT_LCNAMES=y
|
|
CONFIG_FAT_LFN=y
|
|
CONFIG_FAT_MAXFNAME=32
|
|
CONFIG_FS_NXFFS=n
|
|
CONFIG_FS_ROMFS=n
|
|
|
|
#
|
|
# SPI-based MMC/SD driver
|
|
#
|
|
CONFIG_MMCSD_NSLOTS=1
|
|
CONFIG_MMCSD_READONLY=n
|
|
CONFIG_MMCSD_SPICLOCK=12500000
|
|
|
|
#
|
|
# Block driver buffering
|
|
#
|
|
CONFIG_FS_READAHEAD=n
|
|
CONFIG_FS_WRITEBUFFER=n
|
|
|
|
#
|
|
# SDIO-based MMC/SD driver
|
|
#
|
|
CONFIG_SDIO_DMA=n
|
|
CONFIG_MMCSD_MMCSUPPORT=n
|
|
CONFIG_MMCSD_HAVECARDDETECT=n
|
|
|
|
#
|
|
# The SPIFI driver has some special options that can be used to
|
|
# create an MTD device on the SPIFI FLASH. NOTE: CONFIG_LPC43_SPIFI=y
|
|
# must also be defined to enable SPIFI setup support:
|
|
#
|
|
# SPIFI device geometry:
|
|
#
|
|
CONFIG_SPIFI_OFFSET=0
|
|
CONFIG_SPIFI_BLKSIZE=4096
|
|
CONFIG_SPIFI_SECTOR512=y
|
|
CONFIG_SPIFI_RDONLY=n
|
|
CONFIG_SPIFI_LIBRARY=n
|
|
CONFIG_SPIFI_VERIFY=n
|
|
CONFIG_DEBUG_SPIFI_DUMP=n
|
|
# TCP/IP and UDP support via uIP
|
|
#
|
|
CONFIG_NET=n
|
|
CONFIG_NET_IPv6=n
|
|
CONFIG_NSOCKET_DESCRIPTORS=0
|
|
CONFIG_NET_SOCKOPTS=y
|
|
CONFIG_NET_BUFSIZE=420
|
|
CONFIG_NET_TCP=n
|
|
CONFIG_NET_TCP_CONNS=40
|
|
CONFIG_NET_MAX_LISTENPORTS=40
|
|
CONFIG_NET_UDP=n
|
|
CONFIG_NET_UDP_CHECKSUMS=y
|
|
#CONFIG_NET_UDP_CONNS=10
|
|
CONFIG_NET_ICMP=n
|
|
CONFIG_NET_ICMP_PING=n
|
|
#CONFIG_NET_PINGADDRCONF=0
|
|
CONFIG_NET_STATISTICS=y
|
|
#CONFIG_NET_RECEIVE_WINDOW=
|
|
#CONFIG_NET_ARPTAB_SIZE=8
|
|
CONFIG_NET_BROADCAST=n
|
|
|
|
#
|
|
# UIP Network Utilities
|
|
#
|
|
CONFIG_NET_DHCP_LIGHT=n
|
|
CONFIG_NET_RESOLV_ENTRIES=4
|
|
|
|
#
|
|
# FTP Server
|
|
#
|
|
CONFIG_FTPD_CMDBUFFERSIZE=2048
|
|
|
|
#
|
|
CONFIG_MODBUS=n
|
|
CONFIG_MB_ASCII_ENABLED=y
|
|
CONFIG_MB_RTU_ENABLED=y
|
|
CONFIG_MB_TCP_ENABLED=n
|
|
CONFIG_MB_ASCII_TIMEOUT_SEC=1
|
|
CONFIG_MB_ASCII_TIMEOUT_WAIT_BEFORE_SEND_MS=0
|
|
CONFIG_MB_FUNC_HANDLERS_MAX=16
|
|
CONFIG_MB_FUNC_OTHER_REP_SLAVEID_BUF=32
|
|
CONFIG_MB_FUNC_OTHER_REP_SLAVEID_ENABLED=y
|
|
CONFIG_MB_FUNC_READ_INPUT_ENABLED=y
|
|
CONFIG_MB_FUNC_READ_HOLDING_ENABLED=y
|
|
CONFIG_MB_FUNC_WRITE_HOLDING_ENABLED=y
|
|
CONFIG_MB_FUNC_WRITE_MULTIPLE_HOLDING_ENABLED=y
|
|
CONFIG_MB_FUNC_READ_COILS_ENABLED=y
|
|
CONFIG_MB_FUNC_WRITE_COIL_ENABLED=y
|
|
CONFIG_MB_FUNC_WRITE_MULTIPLE_COILS_ENABLED=y
|
|
CONFIG_MB_FUNC_READ_DISCRETE_INPUTS_ENABLED=y
|
|
CONFIG_MB_FUNC_READWRITE_HOLDING_ENABLED=y
|
|
|
|
#
|
|
# USB Device Configuration
|
|
#
|
|
CONFIG_USBDEV=n
|
|
CONFIG_USBDEV_ISOCHRONOUS=n
|
|
CONFIG_USBDEV_DUALSPEED=n
|
|
CONFIG_USBDEV_SELFPOWERED=y
|
|
CONFIG_USBDEV_REMOTEWAKEUP=n
|
|
CONFIG_USBDEV_MAXPOWER=100
|
|
CONFIG_USBDEV_TRACE=n
|
|
CONFIG_USBDEV_TRACE_NRECORDS=128
|
|
|
|
#
|
|
# LPC43xx USB Configuration
|
|
#
|
|
CONFIG_LPC43_USBDEV_FRAME_INTERRUPT=n
|
|
CONFIG_LPC43_USBDEV_EPFAST_INTERRUPT=n
|
|
CONFIG_LPC43_USBDEV_DMA=n
|
|
CONFIG_LPC43_USBDEV_NDMADESCRIPTORS=0
|
|
CONFIG_LPC43_USBDEV_DMAINTMASK=0
|
|
|
|
#
|
|
# USB Serial Device Configuration
|
|
#
|
|
CONFIG_PL2303=n
|
|
CONFIG_PL2303_EPINTIN=1
|
|
CONFIG_PL2303_EPBULKOUT=2
|
|
CONFIG_PL2303_EPBULKIN=5
|
|
CONFIG_PL2303_NWRREQS=4
|
|
CONFIG_PL2303_NRDREQS=4
|
|
CONFIG_PL2303_VENDORID=0x067b
|
|
CONFIG_PL2303_PRODUCTID=0x2303
|
|
CONFIG_PL2303_VENDORSTR="Nuttx"
|
|
CONFIG_PL2303_PRODUCTSTR="USBdev Serial"
|
|
CONFIG_PL2303_RXBUFSIZE=512
|
|
CONFIG_PL2303_TXBUFSIZE=512
|
|
|
|
#
|
|
# USB Storage Device Configuration
|
|
#
|
|
CONFIG_USBMSC=n
|
|
CONFIG_USBMSC_EP0MAXPACKET=64
|
|
CONFIG_USBMSC_EPBULKOUT=2
|
|
CONFIG_USBMSC_EPBULKIN=5
|
|
CONFIG_USBMSC_NRDREQS=2
|
|
CONFIG_USBMSC_NWRREQS=2
|
|
CONFIG_USBMSC_BULKINREQLEN=256
|
|
CONFIG_USBMSC_BULKOUTREQLEN=256
|
|
CONFIG_USBMSC_VENDORID=0x584e
|
|
CONFIG_USBMSC_VENDORSTR="NuttX"
|
|
CONFIG_USBMSC_PRODUCTID=0x5342
|
|
CONFIG_USBMSC_PRODUCTSTR="USBdev Storage"
|
|
CONFIG_USBMSC_VERSIONNO=0x0399
|
|
CONFIG_USBMSC_REMOVABLE=y
|
|
|
|
#
|
|
# Settings for examples/uip
|
|
#
|
|
CONFIG_EXAMPLE_UIP_IPADDR=0x0a000002
|
|
CONFIG_EXAMPLE_UIP_DRIPADDR=0x0a000001
|
|
CONFIG_EXAMPLE_UIP_NETMASK=0xffffff00
|
|
CONFIG_EXAMPLE_UIP_DHCPC=n
|
|
|
|
#
|
|
# Settings for examples/nettest
|
|
#
|
|
CONFIG_EXAMPLE_NETTEST_SERVER=n
|
|
CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n
|
|
CONFIG_EXAMPLE_NETTEST_NOMAC=n
|
|
CONFIG_EXAMPLE_NETTEST_IPADDR=0x0a000002
|
|
CONFIG_EXAMPLE_NETTEST_DRIPADDR=0x0a000001
|
|
CONFIG_EXAMPLE_NETTEST_NETMASK=0xffffff00
|
|
CONFIG_EXAMPLE_NETTEST_CLIENTIP=0x0a000001
|
|
|
|
#
|
|
# Settings for examples/ostest
|
|
#
|
|
CONFIG_EXAMPLES_OSTEST_LOOPS=1
|
|
CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
|
|
CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
|
|
|
|
#
|
|
# Settings for apps/nshlib
|
|
#
|
|
CONFIG_NSH_FILEIOSIZE=512
|
|
CONFIG_NSH_STRERROR=n
|
|
CONFIG_NSH_LINELEN=64
|
|
CONFIG_NSH_NESTDEPTH=3
|
|
CONFIG_NSH_DISABLESCRIPT=n
|
|
CONFIG_NSH_DISABLEBG=n
|
|
CONFIG_NSH_ROMFSETC=n
|
|
CONFIG_NSH_CONSOLE=y
|
|
#CONFIG_NSH_CONDEV="/dev/ttyS1"
|
|
CONFIG_NSH_TELNET=n
|
|
CONFIG_NSH_ARCHINIT=y
|
|
CONFIG_NSH_IOBUFFER_SIZE=512
|
|
CONFIG_NSH_DHCPC=n
|
|
CONFIG_NSH_NOMAC=n
|
|
CONFIG_NSH_IPADDR=0x0a000002
|
|
CONFIG_NSH_DRIPADDR=0x0a000001
|
|
CONFIG_NSH_NETMASK=0xffffff00
|
|
CONFIG_NSH_ROMFSMOUNTPT="/etc"
|
|
CONFIG_NSH_INITSCRIPT="init.d/rcS"
|
|
CONFIG_NSH_ROMFSDEVNO=0
|
|
CONFIG_NSH_ROMFSSECTSIZE=64
|
|
CONFIG_NSH_FATDEVNO=1
|
|
CONFIG_NSH_FATSECTSIZE=512
|
|
CONFIG_NSH_FATNSECTORS=1024
|
|
CONFIG_NSH_FATMOUNTPT="/tmp"
|
|
|
|
#
|
|
# Architecture-specific NSH options
|
|
#
|
|
CONFIG_NSH_MMCSDSPIPORTNO=0
|
|
CONFIG_NSH_MMCSDSLOTNO=0
|
|
CONFIG_NSH_MMCSDMINOR=0
|
|
|
|
#
|
|
# I2C tool settings
|
|
#
|
|
CONFIG_I2CTOOL_BUILTIN=y
|
|
CONFIG_I2CTOOL_MINBUS=1
|
|
CONFIG_I2CTOOL_MAXBUS=3
|
|
#CONFIG_I2CTOOL_MINADDR
|
|
#CONFIG_I2CTOOL_MAXADDR
|
|
#CONFIG_I2CTOOL_MAXREGADDR
|
|
CONFIG_I2CTOOL_DEFFREQ=100000
|
|
|
|
#
|
|
# Settings for examples/buttons
|
|
#
|
|
CONFIG_EXAMPLE_BUTTONS_MIN=0
|
|
CONFIG_EXAMPLE_BUTTONS_MAX=0
|
|
CONFIG_EXAMPLE_IRQBUTTONS_MIN=0
|
|
CONFIG_EXAMPLE_IRQBUTTONS_MAX=0
|
|
CONFIG_EXAMPLE_BUTTONS_NAME1="SW2"
|
|
|
|
#
|
|
# examples/modbus
|
|
#
|
|
CONFIG_EXAMPLES_MODBUS_PORT=1
|
|
CONFIG_EXAMPLES_MODBUS_BAUD=B9600
|
|
|
|
#
|
|
# Settings for examples/usbserial
|
|
#
|
|
CONFIG_EXAMPLES_USBSERIAL_INONLY=n
|
|
CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n
|
|
CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n
|
|
CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n
|
|
|
|
CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n
|
|
CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n
|
|
CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n
|
|
CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n
|
|
CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n
|
|
|
|
#
|
|
# Settings for examples/adc
|
|
#
|
|
|
|
#
|
|
# Settings for examples/can
|
|
#
|
|
|
|
#
|
|
# Settings for examples/watchdog
|
|
#
|
|
# This test depends on these specific Watchdog/NSH configurations settings (your
|
|
# specific watchdog hardware settings might require additional settings).
|
|
#
|
|
|
|
#
|
|
# Settings for examples/pwm
|
|
#
|
|
|
|
#
|
|
# Settings for examples/ftpd
|
|
#
|
|
|
|
#
|
|
# Stack and heap information
|
|
#
|
|
CONFIG_BOOT_RUNFROMFLASH=n
|
|
CONFIG_BOOT_COPYTORAM=n
|
|
CONFIG_CUSTOM_STACK=n
|
|
CONFIG_IDLETHREAD_STACKSIZE=1024
|
|
CONFIG_USERMAIN_STACKSIZE=2048
|
|
CONFIG_PTHREAD_STACK_MIN=256
|
|
CONFIG_PTHREAD_STACK_DEFAULT=2048
|
|
CONFIG_HEAP_BASE=
|
|
CONFIG_HEAP_SIZE=
|