px4-firmware/nuttx/configs/skp16c26/ostest/ld.script

140 lines
3.9 KiB
Plaintext

/****************************************************************************
* configs/skp16c26/ostest/ld.script
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
OUTPUT_ARCH(m32c)
ENTRY(_stext)
SECTIONS
{
/* "Far" flash memory begins at address 0xf0000 for the M20262F8 part and
* ends at address 0xfffff (all parts). The program entry point is
* the first address in flash
*/
. = 0xf0000;
.text : {
_stext = ABSOLUTE(.);
*(.text)
*(.fixup)
*(.gnu.warning)
*(.rodata)
*(.glue_7)
*(.glue_7t)
*(.got) /* Global offset table */
_etext = ABSOLUTE(.);
}
_enronly = ABSOLUTE(.); /* End of read-only values */
/* .ndata will be relocated */
/* from this address */
/* The "variable" vector table will be fixed at the following address */
. = 0xffd00;
.varvect : {
_svarvect = ABSOLUTE(.);
*(.varvect)
_evarvect = ABSOLUTE(.);
}
/* Followed by the special page/fixed vector table. */
. = 0xffe00;
.specpg : {
_sspecpg = ABSOLUTE(.);
*(.specpg)
_especpg = ABSOLUTE(.);
}
. = 0xfffdc;
.fixvect : {
_sfixvect = ABSOLUTE(.);
*(.fixvect)
_efixvect = ABSOLUTE(.);
}
/* Internal "near" RAM begins at address 0x00400 (all parts) and ends at
* address 0x00bff (M20262F6 and M20262F8 parts). With the RAM
* region, used is .data followed by .bss. The remainder of RAM
* carved up by the start-up code into stacks and heaps.
*/
. = 0x00400;
.ndata : {
_sndata = ABSOLUTE(.);
*(.data)
CONSTRUCTORS
_endata = ABSOLUTE(.);
}
.nbss : { /* BSS */
_snbss = ABSOLUTE(.);
*(.bss)
*(COMMON)
_enbss = ABSOLUTE(.);
}
/* "Far" RAM begins at 0x10000. The SKP16C26 has no far RAM */
. = 0x10000;
.fdata : {
_sfdata = ABSOLUTE(.);
*(.fdata)
CONSTRUCTORS
_efdata = ABSOLUTE(.);
}
.fbss : { /* BSS */
_sfbss = ABSOLUTE(.);
*(.fbss)
*(COMMON)
_efbss = ABSOLUTE(.);
}
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}