px4-firmware/msg/manual_control_switches.msg

37 lines
2.1 KiB
Plaintext

uint64 timestamp # time since system start (microseconds)
uint64 timestamp_sample # the timestamp of the raw data (microseconds)
uint8 SWITCH_POS_NONE = 0 # switch is not mapped
uint8 SWITCH_POS_ON = 1 # switch activated (value = 1)
uint8 SWITCH_POS_MIDDLE = 2 # middle position (value = 0)
uint8 SWITCH_POS_OFF = 3 # switch not activated (value = -1)
uint8 MODE_SLOT_NONE = 0 # no mode slot assigned
uint8 MODE_SLOT_1 = 1 # mode slot 1 selected
uint8 MODE_SLOT_2 = 2 # mode slot 2 selected
uint8 MODE_SLOT_3 = 3 # mode slot 3 selected
uint8 MODE_SLOT_4 = 4 # mode slot 4 selected
uint8 MODE_SLOT_5 = 5 # mode slot 5 selected
uint8 MODE_SLOT_6 = 6 # mode slot 6 selected
uint8 MODE_SLOT_NUM = 6 # number of slots
uint8 mode_slot # the slot a specific model selector is in
uint8 arm_switch # arm/disarm switch: _DISARMED_, ARMED
uint8 return_switch # return to launch 2 position switch (mandatory): _NORMAL_, RTL
uint8 loiter_switch # loiter 2 position switch (optional): _MISSION_, LOITER
uint8 offboard_switch # offboard 2 position switch (optional): _NORMAL_, OFFBOARD
uint8 kill_switch # throttle kill: _NORMAL_, KILL
uint8 gear_switch # landing gear switch: _DOWN_, UP
uint8 transition_switch # VTOL transition switch: _HOVER, FORWARD_FLIGHT
# legacy "advanced" switch configuration (will be removed soon)
uint8 mode_switch # main mode 3 position switch (mandatory): _MANUAL_, ASSIST, AUTO
uint8 man_switch # manual switch (only relevant for fixed wings, optional): _STABILIZED_, MANUAL
uint8 acro_switch # acro 2 position switch (optional): _MANUAL_, ACRO
uint8 stab_switch # stabilize switch (only relevant for fixed wings, optional): _MANUAL, STABILIZED
uint8 posctl_switch # position control 2 position switch (optional): _ALTCTL_, POSCTL
uint32 switch_changes # number of switch changes