px4-firmware/nuttx/configs/stm3210e-eval/Kconfig

148 lines
4.0 KiB
Plaintext

#
# For a description of the syntax of this configuration file,
# see misc/tools/kconfig-language.txt.
#
if ARCH_BOARD_STM3210E_EVAL
comment "STM3210E-EVAL LCD Hardware Configuration"
config STM3210E_LCD
bool "Select support for the STM3210E-EVAL LCD"
default y
depends on LCD && STM32_FSMC
---help---
Enable support for the LCD on the STM3210E-EVAL board. See additional,
LCD-common settings in the drivers/lcd Kconfig file.
config LCD_BACKLIGHT
bool "LCD backlight support"
depends on STM3210E_LCD
default n
---help---
Define to support a backlight.
config LCD_PWM
bool "LCD backlight PWM control"
default n
depends on LCD_BACKLIGHT && STM32_TIM1
---help---
If STM32_TIM1 is also defined, then an adjustable backlight will be
provided using timer 1 to generate various pulse widthes. The
granularity of the settings is determined by LCD_MAXPOWER. If LCD_PWM
(or STM32_TIM1) is not defined, then a simple on/off backlight is
provided.
config LCD_RDSHIFT
int "LCD data shift"
default 5
depends on STM3210E_LCD
---help---
When reading 16-bit gram data, there appears to be a shift in the returned
data. This value fixes the offset. Default 5.
config STM32_AM240320_DISABLE
bool "Disable AM240320 support"
default n
depends on STM3210E_LCD
---help---
The LCD driver dynamically selects the LCD based on the reported LCD
ID value. However, code size can be reduced by suppressing support for
individual LCDs using this option
config STM32_SPFD5408B_DISABLE
bool "Disable SPFD5408B support"
default n
depends on STM3210E_LCD
---help---
The LCD driver dynamically selects the LCD based on the reported LCD
ID value. However, code size can be reduced by suppressing support for
individual LCDs using this option
config STM32_R61580_DISABLE
bool "Disable R61580 support"
default n
depends on STM3210E_LCD
---help---
The LCD driver dynamically selects the LCD based on the reported LCD
ID value. However, code size can be reduced by suppressing support for
individual LCDs using this option
endif
config PM_BUTTONS
bool "PM Button support"
default n
depends on PM && ARCH_IRQBUTTONS
---help---
Enable PM button EXTI interrupts to support PM testing
config PM_BUTTONS_MIN
int "Minimum button number"
default 0
depends on PM_BUTTONS
---help---
The lowest button code to use for PM testing (see board.h)
config PM_BUTTONS_MAX
int "Maximum button number"
default 7
depends on PM_BUTTONS
---help---
The highest button code to use for PM testing (see board.h)
config PM_IRQBUTTONS_MIN
int "Minimum interrupting button number"
default 0
depends on PM_BUTTONS
---help---
The lowest interrupting button code to use for PM testing (see board.h)
config PM_IRQBUTTONS_MAX
int "Maximum interrupting button number"
default 7
depends on PM_BUTTONS
---help---
The highest interrupting button code to use for PM testing (see board.h)
config PM_BUTTON_ACTIVITY
int "Button PM activity weight"
default 10
depends on PM_BUTTONS
---help---
The activity weight to report to the power management subsystem when a button is pressed.
config PM_ALARM_SEC
int "PM_STANDBY delay (seconds)"
default 15
depends on PM && RTC_ALARM
--help---
Number of seconds to wait in PM_STANDBY before going to PM_STANDBY mode.
config PM_ALARM_NSEC
int "PM_STANDBY delay (nanoseconds)"
default 0
depends on PM && RTC_ALARM
--help---
Number of additional nanoseconds to wait in PM_STANDBY before going to PM_STANDBY mode.
config PM_SLEEP_WAKEUP
bool "PM_SLEEP wake-up alarm"
default n
depends on PM && RTC_ALARM
--help---
Wake-up of PM_SLEEP mode after a delay and resume normal operation.
config PM_SLEEP_WAKEUP_SEC
int "PM_SLEEP delay (seconds)"
default 10
depends on PM && RTC_ALARM
--help---
Number of seconds to wait in PM_SLEEP before going to PM_STANDBY mode.
config PM_SLEEP_WAKEUP_NSEC
int "PM_SLEEP delay (nanoseconds)"
default 0
depends on PM && RTC_ALARM
--help---
Number of additional nanoseconds to wait in PM_SLEEP before going to PM_STANDBY mode.