px4-firmware/nuttx/configs/olimex-lpc2378
patacongo a18d038b81 Partial change: Removing bash ARCHIVE loop
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5335 42af7a65-404d-4744-a932-0658087f49c3
2012-11-11 15:42:12 +00:00
..
include Resync new repository with old repo r5166 2012-09-17 18:18:44 +00:00
nsh Patch to removed MMCSD NSLOTS warning from Freddie Chopin 2012-11-06 14:57:01 +00:00
ostest Patch to removed MMCSD NSLOTS warning from Freddie Chopin 2012-11-06 14:57:01 +00:00
scripts Massive clean-up of linker scripts from Freddie Chopin 2012-11-04 17:18:25 +00:00
src Partial change: Removing bash ARCHIVE loop 2012-11-11 15:42:12 +00:00
Kconfig Resync new repository with old repo r5166 2012-09-17 18:18:44 +00:00
README.txt Resync new repository with old repo r5166 2012-09-17 18:18:44 +00:00

README.txt

There's not much here:

EXT1 - P3 0:7 are used for LEDs.

UEXT pin 3/4 -TXD2/RXD2- is UART2.

The board I have has the revision '-' of LPC2378 even though I got the board
more than 2 years after the chip revision was released :-( .
I can't get Nuttx to work if I fully enabled the MAM.

I used FTDI ft232 usb-serial with nsh piping as seen on the screenshot.