px4-firmware/makefiles/config_px4fmu-v1_default.mk

154 lines
3.9 KiB
Makefile

#
# Makefile for the px4fmu_default configuration
#
#
# Use the configuration's ROMFS.
#
ROMFS_ROOT = $(PX4_BASE)/ROMFS/px4fmu_common
ROMFS_OPTIONAL_FILES = $(PX4_BASE)/Images/px4io-v1_default.bin
#
# Board support modules
#
MODULES += drivers/device
MODULES += drivers/stm32
MODULES += drivers/stm32/adc
MODULES += drivers/stm32/tone_alarm
MODULES += drivers/led
MODULES += drivers/px4io
MODULES += drivers/px4fmu
MODULES += drivers/boards/px4fmu-v1
MODULES += drivers/ardrone_interface
MODULES += drivers/l3gd20
MODULES += drivers/bma180
MODULES += drivers/mpu6000
MODULES += drivers/hmc5883
MODULES += drivers/ms5611
MODULES += drivers/mb12xx
MODULES += drivers/gps
MODULES += drivers/hil
MODULES += drivers/hott/hott_telemetry
MODULES += drivers/hott/hott_sensors
MODULES += drivers/blinkm
MODULES += drivers/rgbled
MODULES += drivers/mkblctrl
MODULES += drivers/md25
MODULES += drivers/airspeed
MODULES += drivers/ets_airspeed
MODULES += drivers/meas_airspeed
MODULES += modules/sensors
#
# System commands
#
MODULES += systemcmds/eeprom
MODULES += systemcmds/ramtron
MODULES += systemcmds/bl_update
MODULES += systemcmds/boardinfo
MODULES += systemcmds/i2c
MODULES += systemcmds/mixer
MODULES += systemcmds/param
MODULES += systemcmds/perf
MODULES += systemcmds/preflight_check
MODULES += systemcmds/pwm
MODULES += systemcmds/esc_calib
MODULES += systemcmds/reboot
MODULES += systemcmds/top
MODULES += systemcmds/tests
MODULES += systemcmds/config
MODULES += systemcmds/nshterm
#
# General system control
#
MODULES += modules/commander
MODULES += modules/mavlink
MODULES += modules/mavlink_onboard
MODULES += modules/gpio_led
#
# Estimation modules (EKF / other filters)
#
MODULES += modules/attitude_estimator_ekf
MODULES += modules/att_pos_estimator_ekf
MODULES += modules/position_estimator_inav
MODULES += examples/flow_position_estimator
#
# Vehicle Control
#
#MODULES += modules/segway # XXX needs state machine update
#MODULES += modules/fw_pos_control_l1
#MODULES += modules/fw_att_control
MODULES += modules/multirotor_att_control
MODULES += modules/multirotor_pos_control
MODULES += examples/flow_position_control
MODULES += examples/flow_speed_control
#
# Logging
#
MODULES += modules/sdlog2
#
# Unit tests
#
MODULES += modules/unit_test
MODULES += modules/commander/commander_tests
#
# Library modules
#
MODULES += modules/systemlib
MODULES += modules/systemlib/mixer
MODULES += modules/controllib
MODULES += modules/uORB
#
# Libraries
#
LIBRARIES += lib/mathlib/CMSIS
MODULES += lib/mathlib
MODULES += lib/mathlib/math/filter
#MODULES += lib/ecl
MODULES += lib/geo
#
# Demo apps
#
#MODULES += examples/math_demo
# Tutorial code from
# https://pixhawk.ethz.ch/px4/dev/hello_sky
#MODULES += examples/px4_simple_app
# Tutorial code from
# https://pixhawk.ethz.ch/px4/dev/daemon
#MODULES += examples/px4_daemon_app
# Tutorial code from
# https://pixhawk.ethz.ch/px4/dev/debug_values
#MODULES += examples/px4_mavlink_debug
# Tutorial code from
# https://pixhawk.ethz.ch/px4/dev/example_fixedwing_control
MODULES += examples/fixedwing_control
#
# Transitional support - add commands from the NuttX export archive.
#
# In general, these should move to modules over time.
#
# Each entry here is <command>.<priority>.<stacksize>.<entrypoint> but we use a helper macro
# to make the table a bit more readable.
#
define _B
$(strip $1).$(or $(strip $2),SCHED_PRIORITY_DEFAULT).$(or $(strip $3),CONFIG_PTHREAD_STACK_DEFAULT).$(strip $4)
endef
# command priority stack entrypoint
BUILTIN_COMMANDS := \
$(call _B, sercon, , 2048, sercon_main ) \
$(call _B, serdis, , 2048, serdis_main ) \
$(call _B, sysinfo, , 2048, sysinfo_main )