forked from Archive/PX4-Autopilot
709 lines
12 KiB
Plaintext
709 lines
12 KiB
Plaintext
#!nsh
|
|
#
|
|
# PX4FMU startup script.
|
|
#
|
|
# NOTE: COMMENT LINES ARE REMOVED BEFORE STORED IN ROMFS.
|
|
#
|
|
|
|
#
|
|
# Start CDC/ACM serial driver
|
|
#
|
|
sercon
|
|
|
|
#
|
|
# Default to auto-start mode.
|
|
#
|
|
set MODE autostart
|
|
|
|
set FRC /fs/microsd/etc/rc.txt
|
|
set FCONFIG /fs/microsd/etc/config.txt
|
|
set TUNE_ERR ML<<CP4CP4CP4CP4CP4
|
|
set LOG_FILE /fs/microsd/bootlog.txt
|
|
|
|
#
|
|
# Try to mount the microSD card.
|
|
#
|
|
# REBOOTWORK this needs to start after the flight control loop
|
|
if mount -t vfat /dev/mmcsd0 /fs/microsd
|
|
then
|
|
echo "[i] microSD mounted: /fs/microsd"
|
|
# Start playing the startup tune
|
|
tone_alarm start
|
|
else
|
|
tone_alarm MBAGP
|
|
if mkfatfs /dev/mmcsd0
|
|
then
|
|
if mount -t vfat /dev/mmcsd0 /fs/microsd
|
|
then
|
|
echo "[i] microSD card formatted"
|
|
else
|
|
echo "[i] format failed"
|
|
tone_alarm MNBG
|
|
set LOG_FILE /dev/null
|
|
fi
|
|
else
|
|
set LOG_FILE /dev/null
|
|
fi
|
|
fi
|
|
|
|
#
|
|
# Look for an init script on the microSD card.
|
|
# Disable autostart if the script found.
|
|
#
|
|
if [ -f $FRC ]
|
|
then
|
|
echo "[i] Executing script: $FRC"
|
|
sh $FRC
|
|
set MODE custom
|
|
fi
|
|
unset FRC
|
|
|
|
if [ $MODE == autostart ]
|
|
then
|
|
# Try to get an USB console
|
|
# REBOOTWORK this needs to start after the flight control loop
|
|
nshterm /dev/ttyACM0 &
|
|
|
|
#
|
|
# Start the ORB (first app to start)
|
|
#
|
|
uorb start
|
|
|
|
#
|
|
# Load parameters
|
|
#
|
|
set PARAM_FILE /fs/microsd/params
|
|
if mtd start
|
|
then
|
|
set PARAM_FILE /fs/mtd_params
|
|
fi
|
|
|
|
param select $PARAM_FILE
|
|
if param load
|
|
then
|
|
echo "[param] Loaded: $PARAM_FILE"
|
|
else
|
|
echo "[param] FAILED loading $PARAM_FILE"
|
|
if param reset
|
|
then
|
|
fi
|
|
fi
|
|
|
|
#
|
|
# Start system state indicator
|
|
#
|
|
if rgbled start
|
|
then
|
|
else
|
|
if blinkm start
|
|
then
|
|
blinkm systemstate
|
|
fi
|
|
fi
|
|
|
|
if pca8574 start
|
|
then
|
|
fi
|
|
|
|
#
|
|
# Set default values
|
|
#
|
|
set HIL no
|
|
set VEHICLE_TYPE none
|
|
set MIXER none
|
|
set MIXER_AUX none
|
|
set OUTPUT_MODE none
|
|
set PWM_OUT none
|
|
set PWM_RATE none
|
|
set PWM_DISARMED none
|
|
set PWM_MIN none
|
|
set PWM_MAX none
|
|
set PWM_AUX_OUT none
|
|
set PWM_AUX_RATE none
|
|
set PWM_AUX_DISARMED none
|
|
set PWM_AUX_MIN none
|
|
set PWM_AUX_MAX none
|
|
set FAILSAFE_AUX none
|
|
set MK_MODE none
|
|
set FMU_MODE pwm
|
|
set MAVLINK_F default
|
|
set EXIT_ON_END no
|
|
set MAV_TYPE none
|
|
set LOAD_DAPPS yes
|
|
set GPS yes
|
|
set GPS_FAKE no
|
|
set FAILSAFE none
|
|
|
|
#
|
|
# Set AUTOCNF flag to use it in AUTOSTART scripts
|
|
#
|
|
if param compare SYS_AUTOCONFIG 1
|
|
then
|
|
# Wipe out params except RC*
|
|
param reset_nostart RC*
|
|
set AUTOCNF yes
|
|
else
|
|
set AUTOCNF no
|
|
fi
|
|
|
|
#
|
|
# Set USE_IO flag
|
|
#
|
|
if param compare SYS_USE_IO 1
|
|
then
|
|
set USE_IO yes
|
|
else
|
|
set USE_IO no
|
|
fi
|
|
|
|
#
|
|
# Set parameters and env variables for selected AUTOSTART
|
|
#
|
|
if param compare SYS_AUTOSTART 0
|
|
then
|
|
echo "[i] No autostart"
|
|
else
|
|
sh /etc/init.d/rc.autostart
|
|
fi
|
|
unset MODE
|
|
|
|
#
|
|
# Override parameters from user configuration file
|
|
#
|
|
if [ -f $FCONFIG ]
|
|
then
|
|
echo "[i] Custom config: $FCONFIG"
|
|
sh $FCONFIG
|
|
fi
|
|
unset FCONFIG
|
|
|
|
#
|
|
# If autoconfig parameter was set, reset it and save parameters
|
|
#
|
|
if [ $AUTOCNF == yes ]
|
|
then
|
|
param set SYS_AUTOCONFIG 0
|
|
param save
|
|
fi
|
|
unset AUTOCNF
|
|
|
|
set IO_PRESENT no
|
|
|
|
if [ $USE_IO == yes ]
|
|
then
|
|
#
|
|
# Check if PX4IO present and update firmware if needed
|
|
#
|
|
if [ -f /etc/extras/px4io-v2_default.bin ]
|
|
then
|
|
set IO_FILE /etc/extras/px4io-v2_default.bin
|
|
else
|
|
set IO_FILE /etc/extras/px4io-v1_default.bin
|
|
fi
|
|
|
|
if px4io checkcrc ${IO_FILE}
|
|
then
|
|
echo "PX4IO CRC OK" >> $LOG_FILE
|
|
|
|
set IO_PRESENT yes
|
|
else
|
|
echo "PX4IO Trying to update" >> $LOG_FILE
|
|
|
|
tone_alarm MLL32CP8MB
|
|
|
|
if px4io start
|
|
then
|
|
# try to safe px4 io so motor outputs dont go crazy
|
|
if px4io safety_on
|
|
then
|
|
# success! no-op
|
|
else
|
|
# px4io did not respond to the safety command
|
|
px4io stop
|
|
fi
|
|
fi
|
|
|
|
if px4io forceupdate 14662 ${IO_FILE}
|
|
then
|
|
usleep 500000
|
|
if px4io checkcrc $IO_FILE
|
|
then
|
|
echo "PX4IO CRC OK after updating" >> $LOG_FILE
|
|
tone_alarm MLL8CDE
|
|
|
|
set IO_PRESENT yes
|
|
else
|
|
echo "ERROR: PX4IO update failed" >> $LOG_FILE
|
|
tone_alarm $TUNE_ERR
|
|
fi
|
|
else
|
|
echo "ERROR: PX4IO update failed" >> $LOG_FILE
|
|
tone_alarm $TUNE_ERR
|
|
fi
|
|
fi
|
|
unset IO_FILE
|
|
|
|
if [ $IO_PRESENT == no ]
|
|
then
|
|
echo "[i] ERROR: PX4IO not found"
|
|
echo "ERROR: PX4IO not found" >> $LOG_FILE
|
|
tone_alarm $TUNE_ERR
|
|
fi
|
|
fi
|
|
|
|
#
|
|
# Set default output if not set
|
|
#
|
|
if [ $OUTPUT_MODE == none ]
|
|
then
|
|
if [ $USE_IO == yes ]
|
|
then
|
|
set OUTPUT_MODE io
|
|
else
|
|
set OUTPUT_MODE fmu
|
|
fi
|
|
fi
|
|
|
|
if [ $OUTPUT_MODE == io -a $IO_PRESENT != yes ]
|
|
then
|
|
# Need IO for output but it not present, disable output
|
|
set OUTPUT_MODE none
|
|
echo "[i] ERROR: PX4IO not found, disabling output"
|
|
|
|
# Avoid using ttyS0 for MAVLink on FMUv1
|
|
if ver hwcmp PX4FMU_V1
|
|
then
|
|
set FMU_MODE serial
|
|
fi
|
|
fi
|
|
|
|
if [ $OUTPUT_MODE == ardrone ]
|
|
then
|
|
set FMU_MODE gpio_serial
|
|
fi
|
|
|
|
if [ $HIL == yes ]
|
|
then
|
|
set OUTPUT_MODE hil
|
|
if ver hwcmp PX4FMU_V1
|
|
then
|
|
set FMU_MODE serial
|
|
fi
|
|
fi
|
|
unset HIL
|
|
|
|
# waypoint storage
|
|
# REBOOTWORK this needs to start in parallel
|
|
if dataman start
|
|
then
|
|
fi
|
|
|
|
#
|
|
# Sensors System (start before Commander so Preflight checks are properly run)
|
|
#
|
|
sh /etc/init.d/rc.sensors
|
|
|
|
if [ $GPS == yes ]
|
|
then
|
|
if [ $GPS_FAKE == yes ]
|
|
then
|
|
echo "[i] Faking GPS"
|
|
gps start -f
|
|
else
|
|
gps start
|
|
fi
|
|
fi
|
|
unset GPS_FAKE
|
|
|
|
# Needs to be this early for in-air-restarts
|
|
commander start
|
|
|
|
#
|
|
# Start primary output
|
|
#
|
|
set TTYS1_BUSY no
|
|
|
|
# If OUTPUT_MODE == none then something is wrong with setup and we shouldn't try to enable output
|
|
if [ $OUTPUT_MODE != none ]
|
|
then
|
|
if [ $OUTPUT_MODE == uavcan_esc ]
|
|
then
|
|
if param compare UAVCAN_ENABLE 0
|
|
then
|
|
echo "[i] OVERRIDING UAVCAN_ENABLE = 1"
|
|
param set UAVCAN_ENABLE 1
|
|
fi
|
|
fi
|
|
|
|
if [ $OUTPUT_MODE == io -o $OUTPUT_MODE == uavcan_esc ]
|
|
then
|
|
if px4io start
|
|
then
|
|
sh /etc/init.d/rc.io
|
|
else
|
|
echo "ERROR: PX4IO start failed" >> $LOG_FILE
|
|
tone_alarm $TUNE_ERR
|
|
fi
|
|
fi
|
|
|
|
if [ $OUTPUT_MODE == fmu -o $OUTPUT_MODE == ardrone ]
|
|
then
|
|
if fmu mode_$FMU_MODE
|
|
then
|
|
echo "[i] FMU mode_$FMU_MODE started"
|
|
else
|
|
echo "[i] ERROR: FMU mode_$FMU_MODE start failed"
|
|
echo "ERROR: FMU start failed" >> $LOG_FILE
|
|
tone_alarm $TUNE_ERR
|
|
fi
|
|
|
|
if ver hwcmp PX4FMU_V1
|
|
then
|
|
if [ $FMU_MODE == pwm -o $FMU_MODE == gpio ]
|
|
then
|
|
set TTYS1_BUSY yes
|
|
fi
|
|
if [ $FMU_MODE == pwm_gpio -o $OUTPUT_MODE == ardrone ]
|
|
then
|
|
set TTYS1_BUSY yes
|
|
fi
|
|
fi
|
|
fi
|
|
|
|
if [ $OUTPUT_MODE == mkblctrl ]
|
|
then
|
|
set MKBLCTRL_ARG ""
|
|
if [ $MKBLCTRL_MODE == x ]
|
|
then
|
|
set MKBLCTRL_ARG "-mkmode x"
|
|
fi
|
|
if [ $MKBLCTRL_MODE == + ]
|
|
then
|
|
set MKBLCTRL_ARG "-mkmode +"
|
|
fi
|
|
|
|
if mkblctrl $MKBLCTRL_ARG
|
|
then
|
|
echo "[i] MK started"
|
|
else
|
|
echo "[i] ERROR: MK start failed"
|
|
echo "ERROR: MK start failed" >> $LOG_FILE
|
|
tone_alarm $TUNE_ERR
|
|
fi
|
|
unset MKBLCTRL_ARG
|
|
fi
|
|
unset MK_MODE
|
|
|
|
if [ $OUTPUT_MODE == hil ]
|
|
then
|
|
if hil mode_port2_pwm8
|
|
then
|
|
echo "[i] HIL output started"
|
|
else
|
|
echo "[i] ERROR: HIL output start failed"
|
|
echo "ERROR: HIL output start failed" >> $LOG_FILE
|
|
tone_alarm $TUNE_ERR
|
|
fi
|
|
fi
|
|
|
|
#
|
|
# Start IO or FMU for RC PPM input if needed
|
|
#
|
|
if [ $IO_PRESENT == yes ]
|
|
then
|
|
if [ $OUTPUT_MODE != io ]
|
|
then
|
|
if px4io start
|
|
then
|
|
echo "[i] PX4IO started"
|
|
sh /etc/init.d/rc.io
|
|
else
|
|
echo "[i] ERROR: PX4IO start failed"
|
|
echo "ERROR: PX4IO start failed" >> $LOG_FILE
|
|
tone_alarm $TUNE_ERR
|
|
fi
|
|
fi
|
|
else
|
|
if [ $OUTPUT_MODE != fmu -a $OUTPUT_MODE != ardrone ]
|
|
then
|
|
if fmu mode_$FMU_MODE
|
|
then
|
|
echo "[i] FMU mode_$FMU_MODE started"
|
|
else
|
|
echo "[i] ERROR: FMU mode_$FMU_MODE start failed"
|
|
echo "ERROR: FMU mode_$FMU_MODE start failed" >> $LOG_FILE
|
|
tone_alarm $TUNE_ERR
|
|
fi
|
|
|
|
if ver hwcmp PX4FMU_V1
|
|
then
|
|
if [ $FMU_MODE == pwm -o $FMU_MODE == gpio ]
|
|
then
|
|
set TTYS1_BUSY yes
|
|
fi
|
|
if [ $FMU_MODE == pwm_gpio -o $OUTPUT_MODE == ardrone ]
|
|
then
|
|
set TTYS1_BUSY yes
|
|
fi
|
|
fi
|
|
fi
|
|
fi
|
|
fi
|
|
|
|
if [ $MAVLINK_F == default ]
|
|
then
|
|
# Normal mode, use baudrate 57600 (default) and data rate 1000 bytes/s
|
|
if [ $TTYS1_BUSY == yes ]
|
|
then
|
|
# Start MAVLink on ttyS0, because FMU ttyS1 pins configured as something else
|
|
set MAVLINK_F "-r 1000 -d /dev/ttyS0"
|
|
|
|
# Exit from nsh to free port for mavlink
|
|
set EXIT_ON_END yes
|
|
else
|
|
# Start MAVLink on default port: ttyS1
|
|
set MAVLINK_F "-r 1000"
|
|
fi
|
|
fi
|
|
|
|
mavlink start $MAVLINK_F
|
|
unset MAVLINK_F
|
|
|
|
#
|
|
# MAVLink onboard / TELEM2
|
|
#
|
|
if ver hwcmp PX4FMU_V2
|
|
then
|
|
# XXX We need a better way for runtime eval of shell variables,
|
|
# but this works for now
|
|
if param compare SYS_COMPANION 921600
|
|
then
|
|
mavlink start -d /dev/ttyS2 -b 921600 -m onboard -r 20000
|
|
fi
|
|
if param compare SYS_COMPANION 57600
|
|
then
|
|
mavlink start -d /dev/ttyS2 -b 57600 -m onboard -r 1000
|
|
fi
|
|
fi
|
|
|
|
# UAVCAN
|
|
#
|
|
sh /etc/init.d/rc.uavcan
|
|
|
|
#
|
|
# Logging
|
|
#
|
|
sh /etc/init.d/rc.logging
|
|
|
|
#
|
|
# Start up ARDrone Motor interface
|
|
#
|
|
if [ $OUTPUT_MODE == ardrone ]
|
|
then
|
|
ardrone_interface start -d /dev/ttyS1
|
|
fi
|
|
|
|
#
|
|
# Fixed wing setup
|
|
#
|
|
if [ $VEHICLE_TYPE == fw ]
|
|
then
|
|
echo "[i] FIXED WING"
|
|
|
|
if [ $MIXER == none ]
|
|
then
|
|
# Set default mixer for fixed wing if not defined
|
|
set MIXER AERT
|
|
fi
|
|
|
|
if [ $MAV_TYPE == none ]
|
|
then
|
|
# Use MAV_TYPE = 1 (fixed wing) if not defined
|
|
set MAV_TYPE 1
|
|
fi
|
|
|
|
param set MAV_TYPE $MAV_TYPE
|
|
|
|
# Load mixer and configure outputs
|
|
sh /etc/init.d/rc.interface
|
|
|
|
# Start standard fixedwing apps
|
|
if [ $LOAD_DAPPS == yes ]
|
|
then
|
|
sh /etc/init.d/rc.fw_apps
|
|
fi
|
|
fi
|
|
|
|
#
|
|
# Multicopters setup
|
|
#
|
|
if [ $VEHICLE_TYPE == mc ]
|
|
then
|
|
echo "[i] MULTICOPTER"
|
|
|
|
if [ $MIXER == none ]
|
|
then
|
|
echo "Mixer undefined"
|
|
fi
|
|
|
|
if [ $MAV_TYPE == none ]
|
|
then
|
|
# Use mixer to detect vehicle type
|
|
if [ $MIXER == quad_x -o $MIXER == quad_+ ]
|
|
then
|
|
set MAV_TYPE 2
|
|
fi
|
|
if [ $MIXER == quad_w -o $MIXER == sk450_deadcat ]
|
|
then
|
|
set MAV_TYPE 2
|
|
fi
|
|
if [ $MIXER == tri_y_yaw- -o $MIXER == tri_y_yaw+ ]
|
|
then
|
|
set MAV_TYPE 2
|
|
fi
|
|
if [ $MIXER == hexa_x -o $MIXER == hexa_+ ]
|
|
then
|
|
set MAV_TYPE 13
|
|
fi
|
|
if [ $MIXER == hexa_cox ]
|
|
then
|
|
set MAV_TYPE 13
|
|
fi
|
|
if [ $MIXER == octo_x -o $MIXER == octo_+ ]
|
|
then
|
|
set MAV_TYPE 14
|
|
fi
|
|
if [ $MIXER == octo_cox ]
|
|
then
|
|
set MAV_TYPE 14
|
|
fi
|
|
fi
|
|
|
|
# Still no MAV_TYPE found
|
|
if [ $MAV_TYPE == none ]
|
|
then
|
|
echo "Unknown MAV_TYPE"
|
|
else
|
|
param set MAV_TYPE $MAV_TYPE
|
|
fi
|
|
|
|
# Load mixer and configure outputs
|
|
sh /etc/init.d/rc.interface
|
|
|
|
# Start standard multicopter apps
|
|
if [ $LOAD_DAPPS == yes ]
|
|
then
|
|
sh /etc/init.d/rc.mc_apps
|
|
fi
|
|
fi
|
|
|
|
#
|
|
# VTOL setup
|
|
#
|
|
if [ $VEHICLE_TYPE == vtol ]
|
|
then
|
|
echo "[init] Vehicle type: VTOL"
|
|
|
|
if [ $MIXER == none ]
|
|
then
|
|
echo "Default mixer for vtol not defined"
|
|
fi
|
|
|
|
if [ $MAV_TYPE == none ]
|
|
then
|
|
# Use mixer to detect vehicle type
|
|
if [ $MIXER == caipirinha_vtol ]
|
|
then
|
|
set MAV_TYPE 19
|
|
fi
|
|
if [ $MIXER == firefly6 ]
|
|
then
|
|
set MAV_TYPE 21
|
|
fi
|
|
fi
|
|
|
|
# Still no MAV_TYPE found
|
|
if [ $MAV_TYPE == none ]
|
|
then
|
|
echo "Unknown MAV_TYPE"
|
|
else
|
|
param set MAV_TYPE $MAV_TYPE
|
|
fi
|
|
|
|
# Load mixer and configure outputs
|
|
sh /etc/init.d/rc.interface
|
|
|
|
# Start standard vtol apps
|
|
if [ $LOAD_DAPPS == yes ]
|
|
then
|
|
sh /etc/init.d/rc.vtol_apps
|
|
fi
|
|
fi
|
|
|
|
#
|
|
# Rover setup
|
|
#
|
|
if [ $VEHICLE_TYPE == rover ]
|
|
then
|
|
# 10 is MAV_TYPE_GROUND_ROVER
|
|
set MAV_TYPE 10
|
|
|
|
# Load mixer and configure outputs
|
|
sh /etc/init.d/rc.interface
|
|
|
|
# Start standard rover apps
|
|
if [ $LOAD_DAPPS == yes ]
|
|
then
|
|
sh /etc/init.d/rc.axialracing_ax10_apps
|
|
fi
|
|
fi
|
|
|
|
unset MIXER
|
|
unset MAV_TYPE
|
|
unset OUTPUT_MODE
|
|
|
|
#
|
|
# Start the navigator
|
|
#
|
|
navigator start
|
|
|
|
#
|
|
# Generic setup (autostart ID not found)
|
|
#
|
|
if [ $VEHICLE_TYPE == none ]
|
|
then
|
|
echo "[i] No autostart ID found"
|
|
|
|
fi
|
|
|
|
# Start any custom addons
|
|
set FEXTRAS /fs/microsd/etc/extras.txt
|
|
if [ -f $FEXTRAS ]
|
|
then
|
|
echo "[i] Addons script: $FEXTRAS"
|
|
sh $FEXTRAS
|
|
fi
|
|
unset FEXTRAS
|
|
|
|
if [ $EXIT_ON_END == yes ]
|
|
then
|
|
echo "Exit from nsh"
|
|
exit
|
|
fi
|
|
unset EXIT_ON_END
|
|
|
|
# Run no SD alarm last
|
|
if [ $LOG_FILE == /dev/null ]
|
|
then
|
|
echo "[i] No microSD card found"
|
|
# Play SOS
|
|
tone_alarm error
|
|
fi
|
|
|
|
# End of autostart
|
|
fi
|
|
|
|
# There is no further processing, so we can free some RAM
|
|
# XXX potentially unset all script variables.
|
|
unset TUNE_ERR
|