px4-firmware/ROMFS/scripts/rcS

133 lines
2.6 KiB
Plaintext
Executable File

#!nsh
#
# PX4FMU startup script.
#
# This script is responsible for:
#
# - mounting the microSD card (if present)
# - running the user startup script from the microSD card (if present)
# - detecting the configuration of the system and picking a suitable
# startup script to continue with
#
# Note: DO NOT add configuration-specific commands to this script;
# add them to the per-configuration scripts instead.
#
#
# Default to auto-start mode. An init script on the microSD card
# can change this to prevent automatic startup of the flight script.
#
set MODE autostart
set USB autoconnect
#
# Start playing the startup tune
#
tone_alarm start
#
# Try to mount the microSD card.
#
echo "[init] looking for microSD..."
if mount -t vfat /dev/mmcsd0 /fs/microsd
then
echo "[init] card mounted at /fs/microsd"
else
echo "[init] no microSD card found"
fi
#
# Look for an init script on the microSD card.
#
# To prevent automatic startup in the current flight mode,
# the script should set MODE to some other value.
#
if [ -f /fs/microsd/etc/rc ]
then
echo "[init] reading /fs/microsd/etc/rc"
sh /fs/microsd/etc/rc
else
echo "[init] script /fs/microsd/etc/rc not present"
fi
#
# Check for USB host
#
if [ $USB != autoconnect ]
then
echo "[init] not connecting USB"
else
if sercon
then
echo "[init] USB interface connected"
else
echo "[init] No USB connected"
fi
fi
#
# If we are still in flight mode, work out what airframe
# configuration we have and start up accordingly.
#
if [ $MODE != autostart ]
then
echo "[init] automatic startup cancelled by user script"
else
echo "[init] detecting attached hardware..."
#
# Assume that we are PX4FMU in standalone mode
#
set BOARD PX4FMU
#
# Are we attached to a PX4IOAR (AR.Drone carrier board)?
#
if boardinfo test name PX4IOAR
then
set BOARD PX4IOAR
if [ -f /etc/init.d/rc.PX4IOAR ]
then
echo "[init] reading /etc/init.d/rc.PX4IOAR"
usleep 500
sh /etc/init.d/rc.PX4IOAR
fi
else
echo "[init] PX4IOAR not detected"
fi
#
# Are we attached to a PX4IO?
#
if boardinfo test name PX4IO
then
set BOARD PX4IO
if [ -f /etc/init.d/rc.PX4IO ]
then
echo "[init] reading /etc/init.d/rc.PX4IO"
usleep 500
sh /etc/init.d/rc.PX4IO
fi
else
echo "[init] PX4IO not detected"
fi
#
# Looks like we are stand-alone
#
if [ $BOARD == PX4FMU ]
then
echo "[init] no expansion board detected"
if [ -f /etc/init.d/rc.standalone ]
then
echo "[init] reading /etc/init.d/rc.standalone"
sh /etc/init.d/rc.standalone
fi
fi
#
# We may not reach here if the airframe-specific script exits the shell.
#
echo "[init] startup done."
fi