forked from Archive/PX4-Autopilot
82 lines
2.7 KiB
Plaintext
82 lines
2.7 KiB
Plaintext
Aileron/Elevator/Throttle/Rudder/Gear/Flaps mixer
|
|
==================================================
|
|
|
|
This file defines mixers suitable for controlling a fixed wing aircraft with
|
|
aileron, rudder, elevator, throttle, gear, flaps controls. The configuration
|
|
assumes the aileron servo(s) are connected to output 0, the elevator to
|
|
output 1, the throttle to output 2 and the rudder to output 3.
|
|
|
|
Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
|
|
(roll), 1 (pitch), 2 (thrust), 3 (yaw), 4 (flaps), 7 (landing gear)
|
|
|
|
CH1: Aileron mixer
|
|
-------------
|
|
Two scalers total (output, roll).
|
|
|
|
This mixer assumes that the aileron servos are set up correctly mechanically;
|
|
depending on the actual configuration it may be necessary to reverse the scaling
|
|
factors (to reverse the servo movement) and adjust the offset, scaling and
|
|
endpoints to suit.
|
|
|
|
As there is only one output, if using two servos adjustments to compensate for
|
|
differences between the servos must be made mechanically. To obtain the correct
|
|
motion using a Y cable, the servos can be positioned reversed from one another.
|
|
|
|
M: 1
|
|
O: 10000 10000 0 -10000 10000
|
|
S: 0 0 10000 10000 0 -10000 10000
|
|
|
|
CH2: Elevator mixer
|
|
------------
|
|
Two scalers total (output, roll).
|
|
|
|
This mixer assumes that the elevator servo is set up correctly mechanically;
|
|
depending on the actual configuration it may be necessary to reverse the scaling
|
|
factors (to reverse the servo movement) and adjust the offset, scaling and
|
|
endpoints to suit.
|
|
|
|
M: 1
|
|
O: 10000 10000 0 -10000 10000
|
|
S: 0 1 -10000 -10000 0 -10000 10000
|
|
|
|
CH3: Motor speed mixer
|
|
-----------------
|
|
Two scalers total (output, thrust).
|
|
|
|
This mixer generates a full-range output (-1 to 1) from an input in the (0 - 1)
|
|
range. Inputs below zero are treated as zero.
|
|
|
|
M: 1
|
|
O: 10000 10000 0 -10000 10000
|
|
S: 0 3 0 20000 -10000 -10000 10000
|
|
|
|
CH4: Rudder mixer
|
|
------------
|
|
Two scalers total (output, yaw).
|
|
|
|
This mixer assumes that the rudder servo is set up correctly mechanically;
|
|
depending on the actual configuration it may be necessary to reverse the scaling
|
|
factors (to reverse the servo movement) and adjust the offset, scaling and
|
|
endpoints to suit.
|
|
|
|
M: 1
|
|
O: 10000 10000 0 -10000 10000
|
|
S: 0 2 10000 10000 0 -10000 10000
|
|
|
|
CH5: Flaps mixer
|
|
------------
|
|
Flaps are controlled automatically in position control and auto
|
|
but can also be controlled manually
|
|
|
|
M: 1
|
|
O: 5000 10000 0 -10000 10000
|
|
S: 0 4 10000 10000 0 -10000 10000
|
|
|
|
CH6: Landing gear mixer
|
|
------------
|
|
By default pass-through of gear switch
|
|
|
|
M: 1
|
|
O: 10000 10000 0 -10000 10000
|
|
S: 3 5 10000 10000 0 -10000 10000
|