px4-firmware/apps/include/nsh.h

/****************************************************************************
 * apps/include/nsh.h
 *
 *   Copyright (C) 2011, 2013 Gregory Nutt. All rights reserved.
 *   Author: Gregory Nutt <gnutt@nuttx.org>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name NuttX nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ****************************************************************************/

#ifndef __APPS_INCLUDE_NSH_H
#define __APPS_INCLUDE_NSH_H

/****************************************************************************
 * Included Files
 ****************************************************************************/

#include <nuttx/config.h>

/****************************************************************************
 * Pre-Processor Definitions
 ****************************************************************************/
/* If a USB device is selected for the NSH console then we need to handle some
 * special start-up conditions.
 */

#undef HAVE_USB_CONSOLE
#if defined(CONFIG_USBDEV)

/* Check for a PL2303 serial console.  Use console device "/dev/console". */

#  if defined(CONFIG_PL2303) && defined(CONFIG_PL2303_CONSOLE)
#    define HAVE_USB_CONSOLE 1

/* Check for a CDC/ACM serial console.  Use console device "/dev/console". */

#  elif defined(CONFIG_CDCACM) && defined(CONFIG_CDCACM_CONSOLE)
#    define HAVE_USB_CONSOLE 1

/* Check for a generic USB console.  In this case, the USB console device
 * must be provided in CONFIG_NSH_CONDEV.
 */

#  elif defined(CONFIG_NSH_USBCONSOLE)
#    define HAVE_USB_CONSOLE 1
#  endif
#endif

#if CONFIG_RR_INTERVAL > 0
# define SCHED_NSH SCHED_RR
#else
# define SCHED_NSH SCHED_FIFO
#endif

/****************************************************************************
 * Public Data
 ****************************************************************************/

#ifdef __cplusplus
#define EXTERN extern "C"
extern "C" 
{
#else
#define EXTERN extern
#endif

/****************************************************************************
 * Public Function Prototypes
 ****************************************************************************/

/****************************************************************************
 * Name: nsh_initialize
 *
 * Description:
 *   This nterfaces is used to initialize the NuttShell (NSH).
 *   nsh_initialize() should be called one during application start-up prior
 *   to executing either nsh_consolemain() or nsh_telnetstart().
 *
 * Input Parameters:
 *   None
 *
 * Returned Value:
 *   None
 *
 ****************************************************************************/

void nsh_initialize(void);

/****************************************************************************
 * Name: nsh_consolemain
 *
 * Description:
 *   This interfaces maybe to called or started with task_start to start a
 *   single an NSH instance that operates on stdin and stdout.  This
 *   function does not return.
 *
 *   This function handles generic /dev/console character devices, or 
 *   special USB console devices.  The USB console requires some special
 *   operations to handle the cases where the session is lost when the
 *   USB device is unplugged and restarted when the USB device is plugged
 *   in again.
  *
 * Input Parameters:
 *   Standard task start-up arguments.  These are not used.  argc may be
 *   zero and argv may be NULL.
 *
 * Returned Values:
 *   This function does not normally return.  exit() is usually called to
 *   terminate the NSH session.  This function will return in the event of
 *   an error.  In that case, a nonzero value is returned (EXIT_FAILURE=1).
 *  
 ****************************************************************************/

int nsh_consolemain(int argc, char *argv[]);

/****************************************************************************
 * Name: nsh_telnetstart
 *
 * Description:
 *   nsh_telnetstart() starts the Telnet daemon that will allow multiple
 *   NSH connections via Telnet.  This function returns immediately after
 *   the daemon has been started.
 *
 * Input Parameters:
 *   None.  All of the properties of the Telnet daemon are controlled by
 *   NuttX configuration setting.
 *
 * Returned Values:
 *   The task ID of the Telnet daemon was successfully started.  A negated
 *   errno value will be returned on failure.
 *  
 ****************************************************************************/

int nsh_telnetstart(void);

#undef EXTERN
#ifdef __cplusplus
}
#endif

#endif /* __APPS_INCLUDE_NSH_H */