forked from Archive/PX4-Autopilot
50 lines
2.1 KiB
Plaintext
50 lines
2.1 KiB
Plaintext
uint64 timestamp # time since system start (microseconds)
|
|
|
|
uint64 timestamp_sample # the timestamp of the raw data (microseconds)
|
|
|
|
uint8 SOURCE_RC = 1 # radio control
|
|
uint8 SOURCE_MAVLINK_0 = 2 # mavlink instance 0
|
|
uint8 SOURCE_MAVLINK_1 = 3 # mavlink instance 1
|
|
uint8 SOURCE_MAVLINK_2 = 4 # mavlink instance 2
|
|
uint8 SOURCE_MAVLINK_3 = 5 # mavlink instance 4
|
|
|
|
uint8 data_source # where this input is coming from
|
|
|
|
# Any of the channels may not be available and be set to NaN
|
|
# to indicate that it does not contain valid data.
|
|
# The variable names follow the definition of the
|
|
# MANUAL_CONTROL mavlink message.
|
|
# The default range is from -1 to 1 (mavlink message -1000 to 1000)
|
|
# The range for the z variable is defined from 0 to 1. (The z field of
|
|
# the MANUAL_CONTROL mavlink message is defined from -1000 to 1000)
|
|
|
|
float32 x # stick position in x direction -1..1
|
|
# in general corresponds to forward/back motion or pitch of vehicle,
|
|
# in general a positive value means forward or negative pitch and
|
|
# a negative value means backward or positive pitch
|
|
|
|
float32 y # stick position in y direction -1..1
|
|
# in general corresponds to right/left motion or roll of vehicle,
|
|
# in general a positive value means right or positive roll and
|
|
# a negative value means left or negative roll
|
|
|
|
float32 z # throttle stick position 0..1
|
|
# in general corresponds to up/down motion or thrust of vehicle,
|
|
# in general the value corresponds to the demanded throttle by the user,
|
|
# if the input is used for setting the setpoint of a vertical position
|
|
# controller any value > 0.5 means up and any value < 0.5 means down
|
|
|
|
float32 r # yaw stick/twist position, -1..1
|
|
# in general corresponds to the righthand rotation around the vertical
|
|
# (downwards) axis of the vehicle
|
|
|
|
float32 flaps # flap position
|
|
|
|
float32 aux1 # default function: camera yaw / azimuth
|
|
float32 aux2 # default function: camera pitch / tilt
|
|
float32 aux3 # default function: camera trigger
|
|
float32 aux4 # default function: camera roll
|
|
float32 aux5 # default function: payload drop
|
|
float32 aux6
|
|
|