dark0707
/
px4-firmware
forked from Archive/PX4-Autopilot
1
0
Fork 0
Code Pull Requests Activity
px4-firmware/nuttx/net/net_poll.c

373 lines
9.9 KiB
C
Raw Blame History

/****************************************************************************
* net/net_poll.c
*
* Copyright (C) 2008-2009, 2011-2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#if defined(CONFIG_NET) && !defined(CONFIG_DISABLE_POLL)
#include <sys/socket.h>
#include <stdint.h>
#include <stdbool.h>
#include <stdlib.h>
#include <poll.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/net/uip/uip.h>
#include <nuttx/net/net.h>
#include <nuttx/arch.h>
#include <uip/uip_internal.h>
#include "net_internal.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Network polling can only be supported on TCP and only if read-ahead buffering
* is enabled (it could be supported on UDP as will if it also had read-ahead
* buffering.
*/
#if !defined(CONFIG_DISABLE_POLL) && CONFIG_NSOCKET_DESCRIPTORS > 0 && \
defined(CONFIG_NET_TCP) && CONFIG_NET_NTCP_READAHEAD_BUFFERS > 0
# define HAVE_NETPOLL 1
#else
# undef HAVE_NETPOLL
#endif
/****************************************************************************
* Private Types
****************************************************************************/
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Function: poll_interrupt
*
* Description:
* This function is called from the interrupt level to perform the actual
* TCP receive operation via by the uIP layer.
*
* Parameters:
* dev The structure of the network driver that caused the interrupt
* conn The connection structure associated with the socket
* flags Set of events describing why the callback was invoked
*
* Returned Value:
* None
*
* Assumptions:
* Running at the interrupt level
*
****************************************************************************/
#ifdef HAVE_NETPOLL
static uint16_t poll_interrupt(struct uip_driver_s *dev, FAR void *conn,
FAR void *pvpriv, uint16_t flags)
{
FAR struct pollfd *fds = (FAR struct pollfd *)pvpriv;
nllvdbg("flags: %04x\n", flags);
/* 'priv' might be null in some race conditions (?) */
if (fds)
{
pollevent_t eventset = 0;
/* Check for data or connection availability events. */
if ((flags & (UIP_NEWDATA|UIP_BACKLOG)) != 0)
{
eventset |= POLLIN & fds->events;
}
/* A poll is a sign that we are free to send data. */
if ((flags & UIP_POLL) != 0)
{
eventset |= (POLLOUT & fds->events);
}
/* Check for a loss of connection events.
*
* REVISIT: Need to call net_lostconnection() here, but don't have
* the psock instance. What should we do?
*/
if ((flags & (UIP_CLOSE|UIP_ABORT|UIP_TIMEDOUT)) != 0)
{
eventset |= (POLLERR | POLLHUP);
}
/* Awaken the caller of poll() is requested event occurred. */
if (eventset)
{
fds->revents |= eventset;
sem_post(fds->sem);
}
}
return flags;
}
#endif /* HAVE_NETPOLL */
/****************************************************************************
* Function: net_pollsetup
*
* Description:
* Setup to monitor events on one TCP/IP socket
*
* Input Parameters:
* conn - The TCP/IP connection of interest
* fds - The structure describing the events to be monitored, OR NULL if
* this is a request to stop monitoring events.
*
* Returned Value:
* 0: Success; Negated errno on failure
*
****************************************************************************/
#ifdef HAVE_NETPOLL
static inline int net_pollsetup(FAR struct socket *psock, struct pollfd *fds)
{
FAR struct uip_conn *conn = psock->s_conn;
FAR struct uip_callback_s *cb;
uip_lock_t flags;
int ret;
/* Sanity check */
#ifdef CONFIG_DEBUG
if (!conn || !fds)
{
return -EINVAL;
}
#endif
/* Some of the following must be atomic */
flags = uip_lock();
/* Allocate a TCP/IP callback structure */
cb = uip_tcpcallbackalloc(conn);
if (!cb)
{
ret = -EBUSY;
goto errout_with_irq;
}
/* Initialize the callback structure */
cb->flags = (UIP_NEWDATA|UIP_BACKLOG|UIP_POLL|UIP_CLOSE|UIP_ABORT|UIP_TIMEDOUT);
cb->priv = (FAR void *)fds;
cb->event = poll_interrupt;
/* Save the nps reference in the poll structure for use at teardown as well */
fds->priv = (FAR void *)cb;
#ifdef CONFIG_NET_TCPBACKLOG
/* Check for read data or backlogged connection availability now */
if (!sq_empty(&conn->readahead) || uip_backlogavailable(conn))
#else
/* Check for read data availability now */
if (!sq_empty(&conn->readahead))
#endif
{
fds->revents |= (POLLOUT & fds->events);
}
/* Check for a loss of connection events */
if (!_SS_ISCONNECTED(psock->s_flags))
{
fds->revents |= (POLLERR | POLLHUP);
}
/* Check if any requested events are already in effect */
if (fds->revents != 0)
{
/* Yes.. then signal the poll logic */
sem_post(fds->sem);
}
uip_unlock(flags);
return OK;
errout_with_irq:
uip_unlock(flags);
return ret;
}
#endif /* HAVE_NETPOLL */
/****************************************************************************
* Function: net_pollteardown
*
* Description:
* Teardown monitoring of events on an TCP/IP socket
*
* Input Parameters:
* conn - The TCP/IP connection of interest
*
* Returned Value:
* 0: Success; Negated errno on failure
*
****************************************************************************/
#ifdef HAVE_NETPOLL
static inline int net_pollteardown(FAR struct socket *psock, struct pollfd *fds)
{
FAR struct uip_conn *conn = psock->s_conn;
FAR struct uip_callback_s *cb;
uip_lock_t flags;
/* Sanity check */
#ifdef CONFIG_DEBUG
if (!conn || !fds->priv)
{
return -EINVAL;
}
#endif
/* Recover the socket descriptor poll state info from the poll structure */
cb = (FAR struct uip_callback_s *)fds->priv;
if (cb)
{
/* Release the callback */
flags = uip_lock();
uip_tcpcallbackfree(conn, cb);
uip_unlock(flags);
/* Release the poll/select data slot */
fds->priv = NULL;
}
return OK;
}
#endif /* HAVE_NETPOLL */
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Function: net_poll
*
* Description:
* The standard poll() operation redirects operations on socket descriptors
* to this function.
*
* Input Parameters:
* fd - The socket descriptor of interest
* fds - The structure describing the events to be monitored, OR NULL if
* this is a request to stop monitoring events.
* setup - true: Setup up the poll; false: Teardown the poll
*
* Returned Value:
* 0: Success; Negated errno on failure
*
****************************************************************************/
#ifndef CONFIG_DISABLE_POLL
int net_poll(int sockfd, struct pollfd *fds, bool setup)
{
#ifndef HAVE_NETPOLL
return -ENOSYS;
#else
FAR struct socket *psock;
int ret;
/* Get the underlying socket structure and verify that the sockfd
* corresponds to valid, allocated socket
*/
psock = sockfd_socket(sockfd);
if (!psock || psock->s_crefs <= 0)
{
ret = -EBADF;
goto errout;
}
#ifdef CONFIG_NET_UDP
/* poll() not supported for UDP */
if (psock->s_type != SOCK_STREAM)
{
ret = -ENOSYS;
goto errout;
}
#endif
/* Check if we are setting up or tearing down the poll */
if (setup)
{
/* Perform the TCP/IP poll() setup */
ret = net_pollsetup(psock, fds);
}
else
{
/* Perform the TCP/IP poll() teardown */
ret = net_pollteardown(psock, fds);
}
errout:
return ret;
#endif /* HAVE_NETPOLL */
}
#endif /* !CONFIG_DISABLE_POLL */
#endif /* CONFIG_NET && !CONFIG_DISABLE_POLL */
View Git Blame Copy Permalink