forked from Archive/PX4-Autopilot
550 lines
21 KiB
Plaintext
550 lines
21 KiB
Plaintext
#
|
|
# For a description of the syntax of this configuration file,
|
|
# see misc/tools/kconfig-language.txt.
|
|
#
|
|
|
|
choice
|
|
prompt "Select target board"
|
|
default ARCH_BOARD_CUSTOM
|
|
---help---
|
|
Select the board hosting the architure. You must first select the
|
|
exact MCU part number, then the boards supporting that part will
|
|
be available for selection. Use ARCH_BOARD_CUSTOM to create a new
|
|
board configuration.
|
|
|
|
config ARCH_BOARD_AMBER
|
|
bool "Amber Web Server"
|
|
depends on ARCH_CHIP_ATMEGA128
|
|
---help---
|
|
This is placeholder for the SoC Robotics Amber Web Server that is based
|
|
on the Atmel AVR ATMega128 MCU. There is not much there yet and what is
|
|
there is untested due to tool-related issues.
|
|
|
|
config ARCH_BOARD_AVR32DEV1
|
|
bool "Atmel AVR32DEV1 board"
|
|
depends on ARCH_CHIP_AT32UC3B0256
|
|
---help---
|
|
This is a port of NuttX to the Atmel AVR32DEV1 board. That board is
|
|
based on the Atmel AT32UC3B0256 MCU and uses a specially patched
|
|
version of the GNU toolchain: The patches provide support for the
|
|
AVR32 family. That patched GNU toolchain is available only from the
|
|
Atmel website. STATUS: This port is functional but very basic. There
|
|
are configurations for NSH and the OS test.
|
|
|
|
config ARCH_BOARD_C5471EVM
|
|
bool "Spectrum Digital C5471 evaluation board"
|
|
depends on ARCH_CHIP_C5471
|
|
---help---
|
|
This is a port to the Spectrum Digital C5471 evaluation board. The
|
|
TMS320C5471 is a dual core processor from TI with an ARM7TDMI general
|
|
purpose processor and a c54 DSP. It is also known as TMS320DA180 or just DA180.
|
|
NuttX runs on the ARM core and is built with a GNU arm-elf toolchain*.
|
|
This port is complete and verified.
|
|
|
|
config ARCH_BOARD_COMPALE88
|
|
bool "Compal e88 phone"
|
|
depends on ARCH_CHIP_CALYPSO
|
|
---help---
|
|
These directories contain the board support for compal e88 and e99 phones.
|
|
These ports are based on patches contributed by Denis Carikli for both the
|
|
compal e99 and e88. The patches were made by Alan Carvalho de Assis and
|
|
Denis Carikli using the Stefan Richter's Osmocom-bb patches.
|
|
|
|
config ARCH_BOARD_COMPALE99
|
|
bool "Compal e99 phone"
|
|
depends on ARCH_CHIP_CALYPSO
|
|
---help---
|
|
These directories contain the board support for compal e88 and e99 phones.
|
|
These ports are based on patches contributed by Denis Carikli for both the
|
|
compal e99 and e88. The patches were made by Alan Carvalho de Assis and
|
|
Denis Carikli using the Stefan Richter's Osmocom-bb patches.
|
|
|
|
config ARCH_BOARD_DEMOS92S12NEC64
|
|
bool "Freescale DMO9S12NE64 board"
|
|
depends on ARCH_CHIP_MCS92S12NEC64
|
|
---help---
|
|
Freescale DMO9S12NE64 board based on the MC9S12NE64 hcs12 cpu. This
|
|
port uses the m9s12x GCC toolchain. STATUS: (Still) under development; it
|
|
is code complete but has not yet been verified.
|
|
|
|
config ARCH_BOARD_EA3131
|
|
bool "Embedded Artists EA3131 Development board"
|
|
depends on ARCH_CHIP_LPC3131
|
|
---help---
|
|
Embedded Artists EA3131 Development board. This board is based on the
|
|
an NXP LPC3131 MCU. This OS is built with the arm-elf toolchain*.
|
|
STATUS: This port is complete and mature.
|
|
|
|
config ARCH_BOARD_EA3152
|
|
bool "Embedded Artists EA3152 Development board"
|
|
depends on ARCH_CHIP_LPC3152
|
|
---help---
|
|
Embedded Artists EA3152 Development board. This board is based on the
|
|
an NXP LPC3152 MCU. This OS is built with the arm-elf toolchain*.
|
|
STATUS: This port is has not be exercised well, but since it is
|
|
a simple derivative of the ea3131, it should be fully functional.
|
|
|
|
config ARCH_BOARD_EAGLE100
|
|
bool "Micromint Eagle-100 Development board"
|
|
depends on ARCH_CHIP_LM3S6918
|
|
---help---
|
|
Micromint Eagle-100 Development board. This board is based on the
|
|
an ARM Cortex-M3 MCU, the Luminary LM3S6918. This OS is built with the
|
|
arm-elf toolchain*. STATUS: This port is complete and mature.
|
|
|
|
config ARCH_BOARD_EZ80F910200KITG
|
|
bool "ZiLOG ez80f0910200kitg development kit"
|
|
depends on ARCH_CHIP_EZ80F91
|
|
---help---
|
|
ez80Acclaim! Microcontroller. This port use the ZiLOG ez80f0910200kitg
|
|
development kit, eZ80F091 part, and the Zilog ZDS-II Windows command line
|
|
tools. The development environment is Cygwin under WinXP.
|
|
|
|
config ARCH_BOARD_EZ80F910200ZCO
|
|
bool "ZiLOG ez80f0910200zco development kit"
|
|
depends on ARCH_CHIP_EZ80F91
|
|
---help---
|
|
ez80Acclaim! Microcontroller. This port use the Zilog ez80f0910200zco
|
|
development kit, eZ80F091 part, and the Zilog ZDS-II Windows command line
|
|
tools. The development environment is Cygwin under WinXP.
|
|
|
|
config ARCH_BOARD_HYMINI_STM32V
|
|
bool "HY-Mini STM32v board"
|
|
depends on ARCH_CHIP_STM32F103VCT
|
|
---help---
|
|
A configuration for the HY-Mini STM32v board. This board is based on the
|
|
STM32F103VCT chip.
|
|
|
|
config ARCH_BOARD_KWIKSTIK_K40
|
|
bool "FreeScale KwikStik-K40 development board"
|
|
depends on ARCH_CHIP_MK40X256VLQ100
|
|
---help---
|
|
Kinetis K40 Cortex-M4 MCU. This port uses the FreeScale KwikStik-K40
|
|
development board.
|
|
|
|
config ARCH_BOARD_LM3S6432S2E
|
|
bool "Stellaris RDK-S2E Reference Design Kit"
|
|
depends on ARCH_CHIP_LM3S6432
|
|
---help---
|
|
Stellaris RDK-S2E Reference Design Kit and the MDL-S2E Ethernet to
|
|
Serial module.
|
|
|
|
config ARCH_BOARD_LM3S6965EK
|
|
bool "Stellaris LM3S6965 Evaluation Kit"
|
|
depends on ARCH_CHIP_LM3S6965
|
|
---help---
|
|
Stellaris LM3S6965 Evaluation Kit. This board is based on the
|
|
an ARM Cortex-M3 MCU, the Luminary/TI LM3S6965. This OS is built with the
|
|
arm-elf toolchain*. STATUS: This port is complete and mature.
|
|
|
|
config ARCH_BOARD_LM3S8962EK
|
|
bool "Stellaris LMS38962 Evaluation Kit"
|
|
depends on ARCH_CHIP_LM3S8962
|
|
---help---
|
|
Stellaris LMS38962 Evaluation Kit.
|
|
|
|
config ARCH_BOARD_LPCXPRESSO
|
|
bool "NXP LPCExpresso LPC1768"
|
|
depends on ARCH_CHIP_LPC1768
|
|
---help---
|
|
Embedded Artists base board with NXP LPCExpresso LPC1768. This board
|
|
is based on the NXP LPC1768. The Code Red toolchain is used by default.
|
|
STATUS: Under development.
|
|
|
|
config ARCH_BOARD_M68332EVB
|
|
bool "Motoroloa M68332EVB"
|
|
depends on ARCH_M68332
|
|
---help---
|
|
This is a work in progress for the venerable m68322evb board from
|
|
Motorola. This OS is also built with the arm-elf toolchain. STATUS:
|
|
This port was never completed.
|
|
|
|
config ARCH_BOARD_MBED
|
|
bool "mbed LCP1768"
|
|
depends on ARCH_CHIP_LPC1768
|
|
---help---
|
|
The configurations in this directory support the mbed board (http://mbed.org)
|
|
that features the NXP LPC1768 microcontroller. This OS is also built
|
|
with the arm-elf toolchain*. STATUS: Contributed.
|
|
|
|
config ARCH_BOARD_MCU123
|
|
bool "mcu123.com LPC2148 Development Board"
|
|
depends on ARCH_CHIP_LPC2148
|
|
---help---
|
|
This port is for the NXP LPC2148 as provided on the mcu123.com
|
|
lpc214x development board. This OS is also built with the arm-elf
|
|
toolchain*. The port supports serial, timer0, spi, and usb.
|
|
|
|
config ARCH_BOARD_MICROPENDOUS
|
|
bool "Opendous Micropendous 3 board"
|
|
depends on ARCH_CHIP_AT90USB646 || ARCH_CHIP_AT90USB647 || ARCH_CHIP_AT90USB1286 || ARCH_CHIP_AT90USB1287
|
|
---help---
|
|
This is a port to the Opendous Micropendous 3 board. This board may
|
|
be populated with either an AVR AT90USB646, 647, 1286, or 1287 MCU.
|
|
Support is configured for the AT90USB647.
|
|
|
|
config ARCH_BOARD_MX1ADS
|
|
bool "Motorola MX1ADS development board"
|
|
depends on ARCH_CHIP_IMX1
|
|
---help---
|
|
This is a port to the Motorola MX1ADS development board. That board
|
|
is based on the Freescale i.MX1 processor. The i.MX1 is an ARM920T.
|
|
STATUS: This port is nearly code complete but was never fully
|
|
integrated due to tool-related issues.
|
|
|
|
config ARCH_BOARD_NE64BADGE
|
|
bool "FEG NE64 /PoE Badge board"
|
|
depends on ARCH_CHIP_MCS92S12NEC64
|
|
---help---
|
|
Future Electronics Group NE64 /PoE Badge board based on the
|
|
MC9S12NE64 hcs12 cpu. This port uses the m9s12x GCC toolchain.
|
|
STATUS: Under development. The port is code-complete but has
|
|
not yet been fully tested.
|
|
|
|
config ARCH_BOARD_NTOSD_DM320
|
|
bool "Neuros OSD v1.0 Dev Board"
|
|
depends on ARCH_CHIP_DM320
|
|
---help---
|
|
This port uses the Neuros OSD v1.0 Dev Board with a GNU arm-elf
|
|
toolchain*: see
|
|
|
|
http://wiki.neurostechnology.com/index.php/OSD_1.0_Developer_Home
|
|
|
|
There are some differences between the Dev Board and the currently
|
|
available commercial v1.0 Boards. See
|
|
|
|
http://wiki.neurostechnology.com/index.php/OSD_Developer_Board_v1
|
|
|
|
NuttX operates on the ARM9EJS of this dual core processor.
|
|
STATUS: This port is code complete, verified, and included in the
|
|
NuttX 0.2.1 release.
|
|
|
|
config ARCH_BOARD_NUCLEUS2G
|
|
bool "Nucleus 2G board"
|
|
depends on ARCH_CHIP_LPC1768
|
|
---help---
|
|
This port uses the Nucleus 2G board (with Babel CAN board). This board
|
|
features an NXP LPC1768 processor. See the 2G website (http://www.2g-eng.com/)
|
|
for more information about the Nucleus 2G.
|
|
|
|
config ARCH_BOARD_LPC1766STK
|
|
bool "Olimex LPC1766-STK board"
|
|
depends on ARCH_CHIP_LPC1766
|
|
---help---
|
|
This port uses the Olimex LPC1766-STK board and a GNU GCC toolchain* under
|
|
Linux or Cygwin. STATUS: Complete and mature.
|
|
|
|
config ARCH_BOARD_OLIMEXLPC2378
|
|
bool "Olimex-lpc2378 board"
|
|
depends on ARCH_CHIP_LPC2378
|
|
---help---
|
|
This port uses the Olimex-lpc2378 board and a GNU arm-elf toolchain* under
|
|
Linux or Cygwin. STATUS: ostest and NSH configurations available.
|
|
This port for the NXP LPC2378 was contributed by Rommel Marcelo.
|
|
|
|
config ARCH_BOARD_OLIMEX_STRP711
|
|
bool "Olimex STR-P711 board"
|
|
depends on ARCH_CHIP_STR71X
|
|
---help---
|
|
This port uses the Olimex STR-P711 board and a GNU arm-elf toolchain* under
|
|
Linux or Cygwin. See the http://www.olimex.com/dev/str-p711.html" for
|
|
further information. STATUS: Configurations for the basic OS test and NSH
|
|
are complete and verified.
|
|
|
|
config ARCH_BOARD_PCBLOGICPIC32MX
|
|
bool "PIC32MX board from PCB Logic Design Co"
|
|
depends on ARCH_CHIP_PIC32MX460F512L
|
|
---help---
|
|
This is the port of NuttX to the PIC32MX board from PCB Logic Design Co.
|
|
This board features the MicroChip PIC32MX460F512L.
|
|
The board is a very simple -- little more than a carrier for the PIC32
|
|
MCU plus voltage regulation, debug interface, and an OTG connector.
|
|
STATUS: Code complete but testing has been stalled due to tool related problems
|
|
(PICkit 2 does not work with the PIC32).
|
|
|
|
config ARCH_BOARD_PIC32_STARTERKIT
|
|
bool "Microchip PIC32 Ethernet Starter Kit (DM320004)"
|
|
depends on ARCH_CHIP_PIC32MX795F512L
|
|
---help---
|
|
This README file discusses the port of NuttX to the Microchip PIC32 Ethernet
|
|
Starter Kit (DM320004) with the Multimedia Expansion Board (MEB, DM320005).
|
|
Advanced USB Storage. See www.microchip.com for further information.
|
|
|
|
config ARCH_BOARD_PJRC_87C52
|
|
bool "PJRC 87C52 development system"
|
|
depends on ARCH_CHIP_8052
|
|
---help---
|
|
8051 Microcontroller. This port uses the PJRC 87C52 development system
|
|
and the SDCC toolchain. This port is not quite ready for prime time.
|
|
|
|
config ARCH_BOARD_QEMU_I486
|
|
bool "Qemu i486 Mode"
|
|
depends on ARCH_QEMU
|
|
---help---
|
|
Port of NuttX to QEMU in i486 mode. This port will also run on real i486
|
|
hardwared (Google the Bifferboard).
|
|
|
|
config ARCH_BOARD_RGMP
|
|
bool "RGMP"
|
|
depends on ARCH_RGMP
|
|
---help---
|
|
RGMP stands for RTOS and GPOS on Multi-Processor. RGMP is a project for
|
|
running GPOS and RTOS simultaneously on multi-processor platforms. You can
|
|
port your favorite RTOS to RGMP together with an unmodified Linux to form a
|
|
hybrid operating system. This makes your application able to use both RTOS
|
|
and GPOS features.
|
|
|
|
See http://rgmp.sourceforge.net/wiki/index.php/Main_Page for further information
|
|
about RGMP.
|
|
|
|
config ARCH_BOARD_SAM3UEK
|
|
bool "Atmel SAM3U-EK development board"
|
|
depends on ARCH_CHIP_AT91SAM3U4E
|
|
---help---
|
|
The port of NuttX to the Atmel SAM3U-EK development board.
|
|
|
|
config ARCH_BOARD_SKP16C26
|
|
bool "Renesas SKP16C26 StarterKit"
|
|
depends on ARCH_CHIP_M30262F8
|
|
---help---
|
|
Renesas M16C processor on the Renesas SKP16C26 StarterKit. This port
|
|
uses the GNU m32c toolchain. STATUS: The port is complete but untested
|
|
due to issues with compiler internal errors.
|
|
|
|
config ARCH_BOARD_STM3210E_EVAL
|
|
bool "STMicro STM3210E-EVAL development board"
|
|
depends on ARCH_CHIP_STM32F103ZET6
|
|
---help---
|
|
STMicro STM3210E-EVAL development board based on the STMicro STM32F103ZET6
|
|
microcontroller (ARM Cortex-M3). This port uses the GNU Cortex-M3
|
|
toolchain.
|
|
|
|
config ARCH_BOARD_STM3220G_EVAL
|
|
bool "STMicro STM3220G-EVAL development board"
|
|
depends on ARCH_CHIP_STM32F207IG
|
|
---help---
|
|
STMicro STM3220G-EVAL development board based on the STMicro STM32F407IG
|
|
microcontroller (ARM Cortex-M3).
|
|
|
|
config ARCH_BOARD_STM3240G_EVAL
|
|
bool "STMicro STM3210G-EVAL development board"
|
|
depends on ARCH_CHIP_STM32F407IG
|
|
---help---
|
|
STMicro STM3240G-EVAL development board based on the STMicro STM32F103ZET6
|
|
microcontroller (ARM Cortex-M4 with FPU). This port uses a GNU Cortex-M4
|
|
toolchain (such as CodeSourcery).
|
|
|
|
config ARCH_BOARD_STM32F4_DISCOVERY
|
|
bool "STMicro STM32F4-Discovery board"
|
|
depends on ARCH_CHIP_STM32F407VG
|
|
---help---
|
|
STMicro STM32F4-Discovery board boased on the STMIcro STM32F407VGT6 MCU.
|
|
|
|
config ARCH_BOARD_SUREPIC32MX
|
|
bool "Sure PIC32MX boards"
|
|
depends on ARCH_CHIP_PIC32MX440F512H
|
|
---help---
|
|
The "Advanced USB Storage Demo Board," Model DB-DP11215, from Sure
|
|
Electronics (http://www.sureelectronics.net/). This board features
|
|
the MicroChip PIC32MX440F512H. See also
|
|
http://www.sureelectronics.net/goods.php?id=1168 for further
|
|
information about the Sure DB-DP11215 board.
|
|
|
|
config ARCH_BOARD_TEENSY
|
|
bool "PJRC Teensy++ 2.0 board"
|
|
depends on ARCH_CHIP_AT90USB1286
|
|
---help---
|
|
This is the port of NuttX to the PJRC Teensy++ 2.0 board. This board is
|
|
developed by http://pjrc.com/teensy/. The Teensy++ 2.0 is based
|
|
on an Atmel AT90USB1286 MCU.
|
|
|
|
config ARCH_BOARD_TWR_K60N512
|
|
bool "FreeScale TWR-K60N512d evelopment board"
|
|
depends on ARCH_CHIP_MK60N512VMD100
|
|
---help---
|
|
Kinetis K60 Cortex-M4 MCU. This port uses the FreeScale TWR-K60N512
|
|
development board.
|
|
|
|
config ARCH_BOARD_US7032EVB1
|
|
bool "Hitachi SH-1/US7032EVB1 board"
|
|
depends on ARCH_CHIP_SH7032
|
|
---help---
|
|
This is a port of the Hitachi SH-1 on the Hitachi SH-1/US7032EVB1 board.
|
|
STATUS: Work has just began on this port.
|
|
|
|
config ARCH_BOARD_VSN
|
|
bool "SOTEL NetClamps VSN sensor network platform"
|
|
depends on ARCH_CHIP_STM32F103RET6
|
|
---help---
|
|
ISOTEL NetClamps VSN V1.2 ready2go sensor network platform based on the
|
|
STMicro STM32F103RET6. Contributed by Uros Platise. See
|
|
http://isotel.eu/NetClamps/
|
|
|
|
config ARCH_BOARD_XTRS
|
|
bool "XTRS TRS80 Model 3 emulation"
|
|
depends on ARCH_CHIP_Z80
|
|
---help---
|
|
TRS80 Model 3. This port uses a vintage computer based on the Z80.
|
|
An emulator for this computer is available to run TRS80 programs on a
|
|
linux platform (http://www.tim-mann.org/xtrs.html).
|
|
|
|
config ARCH_BOARD_Z16F2800100ZCOG
|
|
bool "Zilog Z16F2800100ZCOG Development Kit"
|
|
depends on ARCH_CHIP_Z16F281
|
|
---help---
|
|
z16f Microcontroller. This port use the ZiLIG z16f2800100zcog
|
|
development kit and the Zilog ZDS-II Windows command line tools. The
|
|
development environment is Cygwin under WinXP.
|
|
|
|
config ARCH_BOARD_Z80SIM
|
|
bool "Z80 Instruction Set Simulator"
|
|
depends on ARCH_CHIP_Z80
|
|
---help---
|
|
z80 Microcontroller. This port uses a Z80 instruction set simulator.
|
|
That simulator can be found in the NuttX SVN at
|
|
http://nuttx.svn.sourceforge.net/viewvc/nuttx/trunk/misc/sims/z80sim.
|
|
This port also uses the SDCC toolchain (http://sdcc.sourceforge.net/")
|
|
(verified with version 2.6.0).
|
|
|
|
config ARCH_BOARD_Z8ENCORE000ZCO
|
|
bool "ZiLOG z8encore000zco Development Kit"
|
|
depends on ARCH_CHIP_Z8F6403
|
|
---help---
|
|
z8Encore! Microcontroller. This port use the ZiLOG z8encore000zco
|
|
development kit, Z8F6403 part, and the Zilog ZDS-II Windows command line
|
|
tools. The development environment is Cygwin under WinXP.
|
|
|
|
config ARCH_BOARD_Z8F64200100KI
|
|
bool "ZiLOG Z8F64200100KIT Development Kit"
|
|
depends on ARCH_CHIP_Z8F642X
|
|
---help---
|
|
z8Encore! Microcontroller. This port use the Zilog z8f64200100kit
|
|
development kit, Z8F6423 part, and the Zilog ZDS-II Windows command line
|
|
tools. The development environment is Cygwin under WinXP.
|
|
|
|
config ARCH_BOARD_SIM
|
|
bool "User mode simulation"
|
|
depends on ARCH_SIM
|
|
---help---
|
|
A user-mode port of NuttX to the x86 Linux platform is available.
|
|
The purpose of this port is primarily to support OS feature development.
|
|
This port does not support interrupts or a real timer (and hence no
|
|
round robin scheduler) Otherwise, it is complete.
|
|
|
|
NOTE: This target will not run on Cygwin probably for many reasons but
|
|
first off because it uses some of the same symbols as does cygwin.dll.
|
|
|
|
config ARCH_BOARD_CUSTOM
|
|
bool "Custom development board"
|
|
---help---
|
|
Select this option if there is no directory for the board under configs/.
|
|
|
|
Don't see the board you want? You must first select the exact MCU part
|
|
number, then the boards supporting that part will be available for selection.
|
|
|
|
endchoice
|
|
|
|
config ARCH_BOARD
|
|
string
|
|
default "amber" if ARCH_BOARD_AMBER
|
|
default "avr32dev1" if ARCH_BOARD_AVR32DEV1
|
|
default "c5471evm" if ARCH_BOARD_C5471EVM
|
|
default "compal_e88" if ARCH_BOARD_COMPALE88
|
|
default "compal_e99" if ARCH_BOARD_COMPALE99
|
|
default "demo9s12ne64" if ARCH_BOARD_DEMOS92S12NEC64
|
|
default "ea3131" if ARCH_BOARD_EA3131
|
|
default "ea3152" if ARCH_BOARD_EA3152
|
|
default "eagle100" if ARCH_BOARD_EAGLE100
|
|
default "ez80f0910200kitg" if ARCH_BOARD_EZ80F910200KITG
|
|
default "ez80f0910200zco" if ARCH_BOARD_EZ80F910200ZCO
|
|
default "hymini-stm32v" if ARCH_BOARD_HYMINI_STM32V
|
|
default "kwikstik-k40" if ARCH_BOARD_KWIKSTIK_K40
|
|
default "lm3s6432-s2e" if ARCH_BOARD_LM3S6432S2E
|
|
default "lm3s6965-ek" if ARCH_BOARD_LM3S6965EK
|
|
default "lm3s8962-ek" if ARCH_BOARD_LM3S8962EK
|
|
default "lpcxpresso-lpc1768" if ARCH_BOARD_LPCXPRESSO
|
|
default " m68322evb" if ARCH_BOARD_M68332EVB
|
|
default "mbed" if ARCH_BOARD_MBED
|
|
default "mcu123-lpc214x" if ARCH_BOARD_MCU123
|
|
default "micropendous3" if ARCH_BOARD_MICROPENDOUS
|
|
default "mx1ads" if ARCH_BOARD_MX1ADS
|
|
default "ne64badge" if ARCH_BOARD_NE64BADGE
|
|
default "ntosd-dm320" if ARCH_BOARD_NTOSD_DM320
|
|
default "nucleus2g" if ARCH_BOARD_NUCLEUS2G
|
|
default "olimex-lpc1766stk" if ARCH_BOARD_LPC1766STK
|
|
default "olimex-lpc2378" if ARCH_BOARD_OLIMEXLPC2378
|
|
default "olimex-strp711" if ARCH_BOARD_OLIMEX_STRP711
|
|
default "pcblogic-pic32mx" if ARCH_BOARD_PCBLOGICPIC32MX
|
|
default "pic32-starterkit" if ARCH_BOARD_PIC32_STARTERKIT
|
|
default "pjrc-8051" if ARCH_BOARD_PJRC_87C52
|
|
default "qemu-i486" if ARCH_BOARD_QEMU_I486
|
|
default "sam3u-ek" if ARCH_BOARD_SAM3UEK
|
|
default "skp16c26" if ARCH_BOARD_SKP16C26
|
|
default "stm3210e-eval" if ARCH_BOARD_STM3210E_EVAL
|
|
default "stm3220g-eval" if ARCH_BOARD_STM3220G_EVAL
|
|
default "stm3240g-eval" if ARCH_BOARD_STM3240G_EVAL
|
|
default "stm32f4discovery" if ARCH_BOARD_STM32F4_DISCOVERY
|
|
default "sure-pic32mx" if ARCH_BOARD_SUREPIC32MX
|
|
default "teensy" if ARCH_BOARD_TEENSY
|
|
default "twr-k60n512" if ARCH_BOARD_TWR_K60N512
|
|
default "us7032evb1" if ARCH_BOARD_US7032EVB1
|
|
default "vsn" if ARCH_BOARD_VSN
|
|
default "xtrs" if ARCH_BOARD_XTRS
|
|
default "z16f2800100zcog" if ARCH_BOARD_Z16F2800100ZCOG
|
|
default "z80sim" if ARCH_BOARD_Z80SIM
|
|
default "z8encore000zco" if ARCH_BOARD_Z8ENCORE000ZCO
|
|
default "z8f64200100kit" if ARCH_BOARD_Z8F64200100KI
|
|
default "sim" if ARCH_BOARD_SIM
|
|
default "" if ARCH_BOARD_CUSTOM
|
|
|
|
source "configs/amber/Kconfig"
|
|
source "configs/avr32dev1/Kconfig"
|
|
source "configs/c5471evm/Kconfig"
|
|
source "configs/compal_e88/Kconfig"
|
|
source "configs/compal_e99/Kconfig"
|
|
source "configs/demo9s12ne64/Kconfig"
|
|
source "configs/ea3131/Kconfig"
|
|
source "configs/ea3152/Kconfig"
|
|
source "configs/eagle100/Kconfig"
|
|
source "configs/ez80f910200kitg/Kconfig"
|
|
source "configs/ez80f910200zco/Kconfig"
|
|
source "configs/hymini-stm32v/Kconfig"
|
|
source "configs/kwikstik-k40/Kconfig"
|
|
source "configs/lm3s6432-s2e/Kconfig"
|
|
source "configs/lm3s6965-ek/Kconfig"
|
|
source "configs/lm3s8962-ek/Kconfig"
|
|
source "configs/lpcxpresso-lpc1768/Kconfig"
|
|
source "configs/m68332evb/Kconfig"
|
|
source "configs/mbed/Kconfig"
|
|
source "configs/mcu123-lpc214x/Kconfig"
|
|
source "configs/micropendous3/Kconfig"
|
|
source "configs/mx1ads/Kconfig"
|
|
source "configs/ne64badge/Kconfig"
|
|
source "configs/ntosd-dm320/Kconfig"
|
|
source "configs/nucleus2g/Kconfig"
|
|
source "configs/olimex-lpc1766stk/Kconfig"
|
|
source "configs/olimex-lpc2378/Kconfig"
|
|
source "configs/olimex-strp711/Kconfig"
|
|
source "configs/pcblogic-pic32mx/Kconfig"
|
|
source "configs/pic32-starterkit/Kconfig"
|
|
source "configs/pjrc-8051/Kconfig"
|
|
source "configs/qemu-i486/Kconfig"
|
|
source "configs/rgmp/Kconfig"
|
|
source "configs/sam3u-ek/Kconfig"
|
|
source "configs/sim/Kconfig"
|
|
source "configs/skp16c26/Kconfig"
|
|
source "configs/stm3210e-eval/Kconfig"
|
|
source "configs/stm3220g-eval/Kconfig"
|
|
source "configs/stm3240g-eval/Kconfig"
|
|
source "configs/stm32f4discovery/Kconfig"
|
|
source "configs/sure-pic32mx/Kconfig"
|
|
source "configs/teensy/Kconfig"
|
|
source "configs/twr-k60n512/Kconfig"
|
|
source "configs/us7032evb1/Kconfig"
|
|
source "configs/vsn/Kconfig"
|
|
source "configs/xtrs/Kconfig"
|
|
source "configs/z16f2800100zcog/Kconfig"
|
|
source "configs/z80sim/Kconfig"
|
|
source "configs/z8encore000zco/Kconfig"
|
|
source "configs/z8f64200100kit/Kconfig"
|