px4-firmware/Makefile

158 lines
4.5 KiB
Makefile

#
# Top-level Makefile for building PX4 firmware images.
#
#
# Note that this is a transitional process; the eventual goal is for this
# project to slim down and simply generate PX4 link kits via the NuttX
# 'make export' mechanism.
#
#
#
# Some useful paths.
#
export PX4BASE = $(realpath $(dir $(lastword $(MAKEFILE_LIST))))
export NUTTX_SRC = $(PX4BASE)/nuttx
export NUTTX_APPS = $(PX4BASE)/apps
export MAVLINK_SRC = $(PX4BASE)/mavlink
export ROMFS_SRC = $(PX4BASE)/ROMFS
export IMAGE_DIR = $(PX4BASE)/Images
#
# Tools
#
MKFW = $(PX4BASE)/Tools/px_mkfw.py
UPLOADER = $(PX4BASE)/Tools/px_uploader.py
#
# What are we currently configured for?
#
CONFIGURED = $(PX4BASE)/.configured
ifeq ($(wildcard $(CONFIGURED)),)
# the $(CONFIGURED) target will make this a reality before building
export TARGET = px4fmu
$(shell echo $(TARGET) > $(CONFIGURED))
else
export TARGET = $(shell cat $(CONFIGURED))
endif
#
# What we will build
#
FIRMWARE_BUNDLE = $(IMAGE_DIR)/$(TARGET).px4
FIRMWARE_BINARY = $(IMAGE_DIR)/$(TARGET).bin
FIRMWARE_PROTOTYPE = $(IMAGE_DIR)/$(TARGET).prototype
#
# Debugging
#
MQUIET = --no-print-directory
#MQUIET = --print-directory
all: $(FIRMWARE_BUNDLE)
#
# Generate a wrapped .px4 file from the built binary
#
$(FIRMWARE_BUNDLE): $(FIRMWARE_BINARY) $(MKFW) $(FIRMWARE_PROTOTYPE)
@echo Generating $@
@$(MKFW) --prototype $(FIRMWARE_PROTOTYPE) \
--git_identity $(PX4BASE) \
--image $(FIRMWARE_BINARY) > $@
#
# Build the firmware binary.
#
.PHONY: $(FIRMWARE_BINARY)
$(FIRMWARE_BINARY): configure_$(TARGET) setup_$(TARGET)
@echo Building $@
@make -C $(NUTTX_SRC) -r $(MQUIET) all
@cp $(NUTTX_SRC)/nuttx.bin $@
#
# The 'configure' targets select one particular firmware configuration
# and makes it current.
#
configure_px4fmu:
ifneq ($(TARGET),px4fmu)
@make -C $(PX4BASE) distclean
endif
@cd $(NUTTX_SRC)/tools && /bin/sh configure.sh px4fmu/nsh
@echo px4fmu > $(CONFIGURED)
configure_px4io:
ifneq ($(TARGET),px4io)
@make -C $(PX4BASE) distclean
endif
@cd $(NUTTX_SRC)/tools && /bin/sh configure.sh px4io/io
@echo px4io > $(CONFIGURED)
#
# Per-configuration additional targets
#
.PHONY: px4fmu_setup
setup_px4fmu:
@echo Generating ROMFS
@make -C $(ROMFS_SRC) all
setup_px4io:
#
# Firmware uploading.
#
# serial port defaults by operating system.
SYSTYPE = $(shell uname)
ifeq ($(SYSTYPE),Darwin)
SERIAL_PORTS ?= "/dev/tty.usbmodemPX1,/dev/tty.usbmodemPX2,/dev/tty.usbmodemPX3,/dev/tty.usbmodemPX4,/dev/tty.usbmodem1,/dev/tty.usbmodem2,/dev/tty.usbmodem3,/dev/tty.usbmodem4"
endif
ifeq ($(SYSTYPE),Linux)
SERIAL_PORTS ?= "/dev/ttyACM5,/dev/ttyACM4,/dev/ttyACM3,/dev/ttyACM2,/dev/ttyACM1,/dev/ttyACM0"
endif
ifeq ($(SERIAL_PORTS),)
SERIAL_PORTS = "\\\\.\\COM32,\\\\.\\COM31,\\\\.\\COM30,\\\\.\\COM29,\\\\.\\COM28,\\\\.\\COM27,\\\\.\\COM26,\\\\.\\COM25,\\\\.\\COM24,\\\\.\\COM23,\\\\.\\COM22,\\\\.\\COM21,\\\\.\\COM20,\\\\.\\COM19,\\\\.\\COM18,\\\\.\\COM17,\\\\.\\COM16,\\\\.\\COM15,\\\\.\\COM14,\\\\.\\COM13,\\\\.\\COM12,\\\\.\\COM11,\\\\.\\COM10,\\\\.\\COM9,\\\\.\\COM8,\\\\.\\COM7,\\\\.\\COM6,\\\\.\\COM5,\\\\.\\COM4,\\\\.\\COM3,\\\\.\\COM2,\\\\.\\COM1,\\\\.\\COM0"
endif
upload: $(FIRMWARE_BUNDLE) $(UPLOADER)
@python -u $(UPLOADER) --port $(SERIAL_PORTS) $(FIRMWARE_BUNDLE)
#
# JTAG firmware uploading with OpenOCD
#
ifeq ($(JTAGCONFIG),)
JTAGCONFIG=interface/olimex-jtag-tiny.cfg
endif
upload-jtag-px4fmu:
@echo Attempting to flash PX4FMU board via JTAG
@openocd -f $(JTAGCONFIG) -f ../Bootloader/stm32f4x.cfg -c init -c "reset halt" -c "flash write_image erase nuttx/nuttx" -c "flash write_image erase ../Bootloader/px4fmu_bl.elf" -c "reset run" -c shutdown
upload-jtag-px4io: all
@echo Attempting to flash PX4IO board via JTAG
@openocd -f $(JTAGCONFIG) -f ../Bootloader/stm32f1x.cfg -c init -c "reset halt" -c "flash write_image erase nuttx/nuttx" -c "flash write_image erase ../Bootloader/px4io_bl.elf" -c "reset run" -c shutdown
#
# Hacks and fixups
#
ifeq ($(SYSTYPE),Darwin)
# PATH inherited by Eclipse may not include toolchain install location
export PATH := $(PATH):/usr/local/bin
endif
#
# Cleanup targets. 'clean' should remove all built products and force
# a complete re-compilation, 'distclean' should remove everything
# that's generated leaving only files that are in source control.
#
.PHONY: clean upload-jtag-px4fmu
clean:
@make -C $(NUTTX_SRC) -r $(MQUIET) distclean
@make -C $(ROMFS_SRC) -r $(MQUIET) clean
.PHONY: distclean
distclean:
@rm -f $(CONFIGURED)
@make -C $(NUTTX_SRC) -r $(MQUIET) distclean
@make -C $(ROMFS_SRC) -r $(MQUIET) distclean