px4-firmware/nuttx/drivers
Lorenz Meier 94084ec22a Enable support for RAMTRON, enable support for EEPROM on FMU 1.x 2013-04-18 22:27:55 +02:00
..
analog Manually fixup merge botches via direct comparison with NuttX r5447. 2013-01-11 02:14:43 -08:00
bch A few native window build updates 2012-11-25 20:58:39 +00:00
input Manually fixup merge botches via direct comparison with NuttX r5447. 2013-01-11 02:14:43 -08:00
lcd Add syslog.h; rename lib_rawprintf() to syslog() 2013-01-28 21:55:16 +00:00
mmcsd Additional patches from Petteri Aimonen for FAT, STM32 SPI, and AT25 2013-02-01 15:32:39 +00:00
mtd Enable support for RAMTRON, enable support for EEPROM on FMU 1.x 2013-04-18 22:27:55 +02:00
net Add syslog.h; rename lib_rawprintf() to syslog() 2013-01-28 21:55:16 +00:00
pipes Resync new repository with old repo r5166 2012-09-17 18:18:44 +00:00
power A few native window build updates 2012-11-25 20:58:39 +00:00
sensors A few native window build updates 2012-11-25 20:58:39 +00:00
sercomm Resync new repository with old repo r5166 2012-09-17 18:18:44 +00:00
serial Hand-merge F427 patches. 2013-03-31 20:56:43 -07:00
syslog Add syslog.h; rename lib_rawprintf() to syslog() 2013-01-28 21:55:16 +00:00
usbdev Missing calls to class SUSPEND/RESUME methods in all USB drivers 2013-01-31 19:20:26 +00:00
usbhost Add board support at configs/zp214xpa for the The0.net ZP213X/4XPA board with the LPC2148; Add configurations sim/nxlines. convert mcu123-lpc214x/nsh to use the kconfig-frontends. 2012-12-28 23:40:54 +00:00
wireless A few native window build updates 2012-11-25 20:58:39 +00:00
Kconfig apps/examples/nettest and poll: Complete Kconfig files 2013-01-24 16:28:15 +00:00
Makefile Manually fixup merge botches via direct comparison with NuttX r5447. 2013-01-11 02:14:43 -08:00
README.txt Resync new repository with old repo r5166 2012-09-17 18:18:44 +00:00
can.c Resync new repository with old repo r5166 2012-09-17 18:18:44 +00:00
dev_null.c Resync new repository with old repo r5166 2012-09-17 18:18:44 +00:00
dev_zero.c Resync new repository with old repo r5166 2012-09-17 18:18:44 +00:00
loop.c apps/examples/nettest and poll: Complete Kconfig files 2013-01-24 16:28:15 +00:00
pwm.c Resync new repository with old repo r5166 2012-09-17 18:18:44 +00:00
ramdisk.c Resync new repository with old repo r5166 2012-09-17 18:18:44 +00:00
rwbuffer.c Resync new repository with old repo r5166 2012-09-17 18:18:44 +00:00
watchdog.c Resync new repository with old repo r5166 2012-09-17 18:18:44 +00:00

README.txt

README
^^^^^^

This directory contains various device drivers -- both block and
character drivers as well as other more specialized drivers.

Contents:
  - Files in this directory
  - Subdirectories of this directory
  - Skeleton files

Files in this directory
^^^^^^^^^^^^^^^^^^^^^^^

can.c
  This is a CAN driver.  See include/nuttx/can.h for usage information.

dev_null.c and dev_zero.c
  These files provide the standard /dev/null and /dev/zero devices.
  See include/nuttx/fs/fs.h for functions that should be called if you
  want to register these devices (devnull_register() and
  devzero_register()).

loop.c
  Supports the standard loop device that can be used to export a
  file (or character device) as a block device.  See losetup() and
  loteardown() in include/nuttx/fs/fs.h.

pwm.c
  Provides the "upper half" of a pulse width modulation (PWM) driver.
  The "lower half" of the PWM driver is provided by device-specific
  logic.  See include/nuttx/pwm.h for usage information.

ramdisk.c
  Can be used to set up a block of memory or (read-only) FLASH as
  a block driver that can be mounted as a files system.  See
  include/nuttx/ramdisk.h.

ramlog.c
  This is a driver that was intended to support debugging output,
  aka syslogging, when the normal serial output is not available.
  For example, if you are using a telnet or USB serial console,
  the debug output will get lost.

  This driver is similar to a pipe in that it saves the debugging
  output in a FIFO in RAM.  It differs from a pipe in numerous
  details as needed to support logging.

  This driver is built when CONFIG_RAMLOG is defined in the Nuttx
  configuration.

rwbuffer.c
  A facility that can be use by any block driver in-order to add
  writing buffering and read-ahead buffering.

Subdirectories of this directory:
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

analog/
  This directory holds implementations of analog device drivers.
  This includes drivers for Analog to Digital Conversion (ADC) as
  well as drivers for Digital to Analog Conversion (DAC).
  See include/nuttx/analog/*.h for registration information.

bch/
  Contains logic that may be used to convert a block driver into
  a character driver.  This is the complementary conversion as that
  performed by loop.c.  See include/nuttx/fs/fs.h for registration
  information.

input/
  This directory holds implementations of input device drivers.
  This includes such things as touchscreen and keypad drivers.
  See include/nuttx/input/*.h for registration information.

lcd/
  Drivers for parallel and serial LCD and OLED type devices.  These
  drivers support interfaces as defined in include/nuttx/lcd/lcd.h

mmcsd/
  Support for MMC/SD block drivers.  MMC/SD block drivers based on
  SPI and SDIO/MCI interfaces are supported.  See include/nuttx/mmcsd.h
  and include/nuttx/sdio.h for further information.

mtd/
  Memory Technology Device (MTD) drivers.  Some simple drivers for
  memory technologies like FLASH, EEPROM, NVRAM, etc.  See
  include/nuttx/mtd.h

  (Note: This is a simple memory interface and should not be
  confused with the "real" MTD developed at infradead.org.  This
  logic is unrelated; I just used the name MTD because I am not
  aware of any other common way to refer to this class of devices).

net/
  Network interface drivers.  See also include/nuttx/net/net.h

pipes/
  FIFO and named pipe drivers.  Standard interfaces are declared
  in include/unistd.h

power/
  Power management (PM) driver interfaces.  These interfaces are used
  to manage power usage of a platform by monitoring driver activity
  and by placing drivers into reduce power usage modes when the
  drivers are not active.

sensors/
  Drivers for various sensors

sercomm/
  Sercomm is the transport used by osmocom-bb that runs on top of serial.
  See http://bb.osmocom.org/trac/wiki/nuttx-bb/run for detailed the usage
  of nuttx with sercomm.

  drivers/sercomm is only built if CONFIG_SERCOMM_CONSOLE in the NuttX
  configuration file.  If you attempt to build this driver without
  osmocom-bb, you will get compilation errors because of header files
  that are needed from the osmocom-bb.

serial/
  Front-end character drivers for chip-specific UARTs.  This provide
  some TTY-like functionality and are commonly used (but not required for)
  the NuttX system console.  See also include/nuttx/serial/serial.h

usbdev/
  USB device drivers.  See also include/nuttx/usb/usbdev.h

usbhost/
  USB host drivers.  See also include/nuttx/usb/usbhost.h

wireless/
  Drivers for various wireless devices.

Skeleton Files
^^^^^^^^^^^^^^

Skeleton files a "empty" frameworks for NuttX drivers.  They are provided to
give you a good starting point if you want to create a new NuttX driver.
The following skeleton files are available:

  drivers/lcd/skeleton.c -- Skeleton LCD driver
  drivers/mtd/skeleton.c -- Skeleton memory technology device drivers
  drivers/net/skeleton.c -- Skeleton network/Ethernet drivers
  drivers/usbhost/usbhost_skeleton.c -- Skeleton USB host class driver