dark0707
/
px4-firmware
forked from Archive/PX4-Autopilot
1
0
Fork 0
Code Pull Requests Activity
px4-firmware/nuttx/drivers/mtd/at45db.c

900 lines
32 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/************************************************************************************
* drivers/mtd/at45db.c
* Driver for SPI-based AT45DB161D (16Mbit)
*
* Copyright (C) 2010-2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
/* Ordering Code Detail:
*
* AT 45DB 16 1 D – SS U
* | | | | | | `- Device grade
* | | | | | `- Package Option
* | | | | `- Device revision
* | | | `- Interface: 1=serial
* | | `- Capacity: 16=16Mbit
* | `- Product family
* `- Atmel designator
*/
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <stdint.h>
#include <stdbool.h>
#include <stdlib.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/kmalloc.h>
#include <nuttx/arch.h>
#include <nuttx/ioctl.h>
#include <nuttx/spi.h>
#include <nuttx/mtd.h>
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* Configuration ********************************************************************/
/* CONFIG_AT45DB_PREWAIT enables higher performance write logic: We leave the chip
* busy after write and erase operations. This improves write and erase performance
* because we do not have to wait as long between transactions (other processing can
* occur while the chip is busy) but means that the chip must stay powered:
*/
#if defined(CONFIG_AT45DB_PWRSAVE) && defined(CONFIG_AT45DB_PREWAIT)
# error "Both CONFIG_AT45DB_PWRSAVE and CONFIG_AT45DB_PREWAIT are defined"
#endif
/* If the user has provided no frequency, use 1MHz */
#ifndef CONFIG_AT45DB_FREQUENCY
# define CONFIG_AT45DB_FREQUENCY 1000000
#endif
/* SPI Commands *********************************************************************/
/* Read commands */
#define AT45DB_RDMN 0xd2 /* Main Memory Page Read */
#define AT45DB_RDARRY 0xe8 /* Continuous Array Read (Legacy Command) */
#define AT45DB_RDARRAYLF 0x03 /* Continuous Array Read (Low Frequency) */
#define AT45DB_RDARRAYHF 0x0b /* Continuous Array Read (High Frequency) */
#define AT45DB_RDBF1LF 0xd1 /* Buffer 1 Read (Low Frequency) */
#define AT45DB_RDBF2LF 0xd3 /* Buffer 2 Read (Low Frequency) */
#define AT45DB_RDBF1 0xd4 /* Buffer 1 Read */
#define AT45DB_RDBF2 0xd6 /* Buffer 2 Read */
/* Program and Erase Commands */
#define AT45DB_WRBF1 0x84 /* Buffer 1 Write */
#define AT45DB_WRBF2 0x87 /* Buffer 2 Write */
#define AT45DB_BF1TOMNE 0x83 /* Buffer 1 to Main Memory Page Program with Built-in Erase */
#define AT45DB_BF2TOMNE 0x86 /* Buffer 2 to Main Memory Page Program with Built-in Erase */
#define AT45DB_BF1TOMN 0x88 /* Buffer 1 to Main Memory Page Program without Built-in Erase */
#define AT45DB_BF2TOMN 0x89 /* Buffer 2 to Main Memory Page Program without Built-in Erase */
#define AT45DB_PGERASE 0x81 /* Page Erase */
#define AT45DB_BLKERASE 0x50 /* Block Erase */
#define AT45DB_SECTERASE 0x7c /* Sector Erase */
#define AT45DB_CHIPERASE1 0xc7 /* Chip Erase - byte 1 */
# define AT45DB_CHIPERASE2 0x94 /* Chip Erase - byte 2 */
# define AT45DB_CHIPERASE3 0x80 /* Chip Erase - byte 3 */
# define AT45DB_CHIPERASE4 0x9a /* Chip Erase - byte 4 */
#define AT45DB_MNTHRUBF1 0x82 /* Main Memory Page Program Through Buffer 1 */
#define AT45DB_MNTHRUBF2 0x85 /* Main Memory Page Program Through Buffer 2 */
/* Protection and Security Commands */
#define AT45DB_ENABPROT1 0x3d /* Enable Sector Protection - byte 1 */
# define AT45DB_ENABPROT2 0x2a /* Enable Sector Protection - byte 2 */
# define AT45DB_ENABPROT3 0x7f /* Enable Sector Protection - byte 3 */
# define AT45DB_ENABPROT4 0xa9 /* Enable Sector Protection - byte 4 */
#define AT45DB_DISABPROT1 0x3d /* Disable Sector Protection - byte 1 */
# define AT45DB_DISABPROT2 0x2a /* Disable Sector Protection - byte 2 */
# define AT45DB_DISABPROT3 0x7f /* Disable Sector Protection - byte 3 */
# define AT45DB_DISABPROT4 0x9a /* Disable Sector Protection - byte 4 */
#define AT45DB_ERASEPROT1 0x3d /* Erase Sector Protection Register - byte 1 */
# define AT45DB_ERASEPROT2 0x2a /* Erase Sector Protection Register - byte 2 */
# define AT45DB_ERASEPROT3 0x7f /* Erase Sector Protection Register - byte 3 */
# define AT45DB_ERASEPROT4 0xcf /* Erase Sector Protection Register - byte 4 */
#define AT45DB_PROGPROT1 0x3d /* Program Sector Protection Register - byte 1 */
# define AT45DB_PROGPROT2 0x2a /* Program Sector Protection Register - byte 2 */
# define AT45DB_PROGPROT3 0x7f /* Program Sector Protection Register - byte 3 */
# define AT45DB_PROGPROT4 0xfc /* Program Sector Protection Register - byte 4 */
#define AT45DB_RDPROT 0x32 /* Read Sector Protection Register */
#define AT45DB_LOCKDOWN1 0x3d /* Sector Lockdown - byte 1 */
# define AT45DB_LOCKDOWN2 0x2a /* Sector Lockdown - byte 2 */
# define AT45DB_LOCKDOWN3 0x7f /* Sector Lockdown - byte 3 */
# define AT45DB_LOCKDOWN4 0x30 /* Sector Lockdown - byte 4 */
#define AT45DB_RDLOCKDOWN 0x35 /* Read Sector Lockdown Register */
#define AT45DB_PROGSEC1 0x9b /* Program Security Register - byte 1 */
# define AT45DB_PROGSEC2 0x00 /* Program Security Register - byte 2 */
# define AT45DB_PROGSEC3 0x00 /* Program Security Register - byte 3 */
# define AT45DB_PROGSEC4 0x00 /* Program Security Register - byte 4 */
#define AT45DB_RDSEC 0x77 /* Read Security Register */
/* Additional commands */
#define AT45DB_MNTOBF1XFR 0x53 /* Main Memory Page to Buffer 1 Transfer */
#define AT45DB_MNTOBF2XFR 0x55 /* Main Memory Page to Buffer 2 Transfer */
#define AT45DB_MNBF1CMP 0x60 /* Main Memory Page to Buffer 1 Compare */
#define AT45DB_MNBF2CMP 0x61 /* Main Memory Page to Buffer 2 Compare */
#define AT45DB_AUTOWRBF1 0x58 /* Auto Page Rewrite through Buffer 1 */
#define AT45DB_AUTOWRBF2 0x59 /* Auto Page Rewrite through Buffer 2 */
#define AT45DB_PWRDOWN 0xb9 /* Deep Power-down */
#define AT45DB_RESUME 0xab /* Resume from Deep Power-down */
#define AT45DB_RDSR 0xd7 /* Status Register Read */
#define AT45DB_RDDEVID 0x9f /* Manufacturer and Device ID Read */
#define AT45DB_MANUFACTURER 0x1f /* Manufacturer ID: Atmel */
#define AT45DB_DEVID1_CAPMSK 0x1f /* Bits 0-4: Capacity */
#define AT45DB_DEVID1_1MBIT 0x02 /* xxx0 0010 = 1Mbit AT45DB011 */
#define AT45DB_DEVID1_2MBIT 0x03 /* xxx0 0012 = 2Mbit AT45DB021 */
#define AT45DB_DEVID1_4MBIT 0x04 /* xxx0 0100 = 4Mbit AT45DB041 */
#define AT45DB_DEVID1_8MBIT 0x05 /* xxx0 0101 = 8Mbit AT45DB081 */
#define AT45DB_DEVID1_16MBIT 0x06 /* xxx0 0110 = 16Mbit AT45DB161 */
#define AT45DB_DEVID1_32MBIT 0x07 /* xxx0 0111 = 32Mbit AT45DB321 */
#define AT45DB_DEVID1_64MBIT 0x08 /* xxx0 1000 = 32Mbit AT45DB641 */
#define AT45DB_DEVID1_FAMMSK 0xe0 /* Bits 5-7: Family */
#define AT45DB_DEVID1_DFLASH 0x20 /* 001x xxxx = Dataflash */
#define AT45DB_DEVID1_AT26DF 0x40 /* 010x xxxx = AT26DFxxx series (Not supported) */
#define AT45DB_DEVID2_VERMSK 0x1f /* Bits 0-4: MLC mask */
#define AT45DB_DEVID2_MLCMSK 0xe0 /* Bits 5-7: MLC mask */
/* Status register bit definitions */
#define AT45DB_SR_RDY (1 << 7) /* Bit 7: RDY/ Not BUSY */
#define AT45DB_SR_COMP (1 << 6) /* Bit 6: COMP */
#define AT45DB_SR_PROTECT (1 << 1) /* Bit 1: PROTECT */
#define AT45DB_SR_PGSIZE (1 << 0) /* Bit 0: PAGE_SIZE */
/* 1 Block = 16 pages; 1 sector = 256 pages */
#define PG_PER_BLOCK (16)
#define PG_PER_SECTOR (256)
/************************************************************************************
* Private Types
************************************************************************************/
/* This type represents the state of the MTD device. The struct mtd_dev_s
* must appear at the beginning of the definition so that you can freely
* cast between pointers to struct mtd_dev_s and struct at45db_dev_s.
*/
struct at45db_dev_s
{
struct mtd_dev_s mtd; /* MTD interface */
FAR struct spi_dev_s *spi; /* Saved SPI interface instance */
uint8_t pageshift; /* log2 of the page size (eg. 1 << 9 = 512) */
uint32_t npages; /* Number of pages in the device */
};
/************************************************************************************
* Private Function Prototypes
************************************************************************************/
/* Lock and per-transaction configuration */
static void at45db_lock(struct at45db_dev_s *priv);
static inline void at45db_unlock(struct at45db_dev_s *priv);
/* Power management */
#ifdef CONFIG_AT45DB_PWRSAVE
static void at45db_pwrdown(struct at45db_dev_s *priv);
static void at45db_resume(struct at45db_dev_s *priv);
#else
# define at45db_pwrdown(priv)
# define at45db_resume(priv)
#endif
/* Low-level AT45DB Helpers */
static inline int at45db_rdid(struct at45db_dev_s *priv);
static inline uint8_t at45db_rdsr(struct at45db_dev_s *priv);
static uint8_t at45db_waitbusy(struct at45db_dev_s *priv);
static inline void at45db_pgerase(struct at45db_dev_s *priv, off_t offset);
static inline int at32db_chiperase(struct at45db_dev_s *priv);
static inline void at45db_pgwrite(struct at45db_dev_s *priv, FAR const uint8_t *buffer,
off_t offset);
/* MTD driver methods */
static int at45db_erase(FAR struct mtd_dev_s *mtd, off_t startblock, size_t nblocks);
static ssize_t at45db_bread(FAR struct mtd_dev_s *mtd, off_t startblock,
size_t nblocks, FAR uint8_t *buf);
static ssize_t at45db_bwrite(FAR struct mtd_dev_s *mtd, off_t startblock,
size_t nblocks, FAR const uint8_t *buf);
static ssize_t at45db_read(FAR struct mtd_dev_s *mtd, off_t offset, size_t nbytes,
FAR uint8_t *buffer);
static int at45db_ioctl(FAR struct mtd_dev_s *mtd, int cmd, unsigned long arg);
/************************************************************************************
* Private Data
************************************************************************************/
/* Chip erase sequence */
#define CHIP_ERASE_SIZE 4
static const uint8_t g_chiperase[CHIP_ERASE_SIZE] = {0xc7, 0x94, 0x80, 0x9a};
/* Sequence to program the device to binary page sizes{256, 512, 1024} */
#define BINPGSIZE_SIZE 4
static const uint8_t g_binpgsize[BINPGSIZE_SIZE] = {0x3d, 0x2a, 0x80, 0xa6};
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Name: at45db_lock
************************************************************************************/
static void at45db_lock(struct at45db_dev_s *priv)
{
/* On SPI busses where there are multiple devices, it will be necessary to
* lock SPI to have exclusive access to the busses for a sequence of
* transfers. The bus should be locked before the chip is selected.
*
* This is a blocking call and will not return until we have exclusiv access to
* the SPI buss. We will retain that exclusive access until the bus is unlocked.
*/
SPI_LOCK(priv->spi, true);
/* After locking the SPI bus, the we also need call the setfrequency, setbits, and
* setmode methods to make sure that the SPI is properly configured for the device.
* If the SPI buss is being shared, then it may have been left in an incompatible
* state.
*/
SPI_SETMODE(priv->spi, SPIDEV_MODE0);
SPI_SETBITS(priv->spi, 8);
(void)SPI_SETFREQUENCY(priv->spi, CONFIG_AT45DB_FREQUENCY);
}
/************************************************************************************
* Name: at45db_unlock
************************************************************************************/
static inline void at45db_unlock(struct at45db_dev_s *priv)
{
SPI_LOCK(priv->spi, false);
}
/************************************************************************************
* Name: at45db_pwrdown
************************************************************************************/
#ifdef CONFIG_AT45DB_PWRSAVE
static void at45db_pwrdown(struct at45db_dev_s *priv)
{
SPI_SELECT(priv->spi, SPIDEV_FLASH, true);
SPI_SEND(priv->spi, AT45DB_PWRDOWN);
SPI_SELECT(priv->spi, SPIDEV_FLASH, false);
}
#endif
/************************************************************************************
* Name: at45db_resume
************************************************************************************/
#ifdef CONFIG_AT45DB_PWRSAVE
static void at45db_resume(struct at45db_dev_s *priv)
{
SPI_SELECT(priv->spi, SPIDEV_FLASH, true);
SPI_SEND(priv->spi, AT45DB_RESUME);
SPI_SELECT(priv->spi, SPIDEV_FLASH, false);
up_udelay(50);
}
#endif
/************************************************************************************
* Name: at45db_rdid
************************************************************************************/
static inline int at45db_rdid(struct at45db_dev_s *priv)
{
uint8_t capacity;
uint8_t devid[3];
fvdbg("priv: %p\n", priv);
/* Configure the bus, and select this FLASH part. (The caller should alread have
* loced the bus for exclusive access)
*/
SPI_SELECT(priv->spi, SPIDEV_FLASH, true);
/* Send the " Manufacturer and Device ID Read" command and read the next three
* ID bytes from the FLASH.
*/
(void)SPI_SEND(priv->spi, AT45DB_RDDEVID);
SPI_RECVBLOCK(priv->spi, devid, 3);
/* Deselect the FLASH */
SPI_SELECT(priv->spi, SPIDEV_FLASH, false);
fvdbg("manufacturer: %02x devid1: %02x devid2: %02x\n",
devid[0], devid[1], devid[2]);
/* Check for a valid manufacturer and memory family */
if (devid[0] == AT45DB_MANUFACTURER &&
(devid[1] & AT45DB_DEVID1_FAMMSK) == AT45DB_DEVID1_DFLASH)
{
/* Okay.. is it a FLASH capacity that we understand? */
capacity = devid[1] & AT45DB_DEVID1_CAPMSK;
switch (capacity)
{
case AT45DB_DEVID1_1MBIT:
/* Save the FLASH geometry for the 16Mbit AT45DB011 */
priv->pageshift = 8; /* Page size = 256 bytes */
priv->npages = 512; /* 512 pages */
return OK;
case AT45DB_DEVID1_2MBIT:
/* Save the FLASH geometry for the 16Mbit AT45DB021 */
priv->pageshift = 8; /* Page size = 256/264 bytes */
priv->npages = 1024; /* 1024 pages */
return OK;
case AT45DB_DEVID1_4MBIT:
/* Save the FLASH geometry for the 16Mbit AT45DB041 */
priv->pageshift = 8; /* Page size = 256/264 bytes */
priv->npages = 2048; /* 2048 pages */
return OK;
case AT45DB_DEVID1_8MBIT:
/* Save the FLASH geometry for the 16Mbit AT45DB081 */
priv->pageshift = 8; /* Page size = 256/264 bytes */
priv->npages = 4096; /* 4096 pages */
return OK;
case AT45DB_DEVID1_16MBIT:
/* Save the FLASH geometry for the 16Mbit AT45DB161 */
priv->pageshift = 9; /* Page size = 512/528 bytes */
priv->npages = 4096; /* 4096 pages */
return OK;
case AT45DB_DEVID1_32MBIT:
/* Save the FLASH geometry for the 16Mbit AT45DB321 */
priv->pageshift = 9; /* Page size = 512/528 bytes */
priv->npages = 8192; /* 8192 pages */
return OK;
case AT45DB_DEVID1_64MBIT:
/* Save the FLASH geometry for the 16Mbit AT45DB321 */
priv->pageshift = 10; /* Page size = 1024/1056 bytes */
priv->npages = 8192; /* 8192 pages */
return OK;
default:
return -ENODEV;
}
}
return -ENODEV;
}
/************************************************************************************
* Name: at45db_rdsr
************************************************************************************/
static inline uint8_t at45db_rdsr(struct at45db_dev_s *priv)
{
uint8_t retval;
SPI_SELECT(priv->spi, SPIDEV_FLASH, true);
SPI_SEND(priv->spi, AT45DB_RDSR);
retval = SPI_SEND(priv->spi, 0xff);
SPI_SELECT(priv->spi, SPIDEV_FLASH, false);
return retval;
}
/************************************************************************************
* Name: at45db_waitbusy
************************************************************************************/
static uint8_t at45db_waitbusy(struct at45db_dev_s *priv)
{
uint8_t sr;
/* Poll the device, waiting for it to report that it is ready */
do
{
up_udelay(10);
sr = (uint8_t)at45db_rdsr(priv);
}
while ((sr & AT45DB_SR_RDY) == 0);
return sr;
}
/************************************************************************************
* Name: at45db_pgerase
************************************************************************************/
static inline void at45db_pgerase(struct at45db_dev_s *priv, off_t sector)
{
uint8_t erasecmd[4];
off_t offset = sector << priv->pageshift;
fvdbg("sector: %08lx\n", (long)sector);
/* Higher performance write logic: We leave the chip busy after write and erase
* operations. This improves write and erase performance because we do not have
* to wait as long between transactions (other processing can occur while the chip
* is busy) but means that the chip must stay powered and that we must check if
* the chip is still busy on each entry point.
*/
#ifdef CONFIG_AT45DB_PREWAIT
at45db_waitbusy(priv);
#endif
/* "The Page Erase command can be used to individually erase any page in the main
* memory array allowing the Buffer to Main Memory Page Program to be utilized at a
* later time. ... To perform a page erase in the binary page size ..., the
* opcode 81H must be loaded into the device, followed by three address bytes
* ... When a low-to-high transition occurs on the CS pin, the part will erase the
* selected page (the erased state is a logical 1). ... the status register and the
* RDY/BUSY pin will indicate that the part is busy."
*/
erasecmd[0] = AT45DB_PGERASE; /* Page erase command */
erasecmd[1] = (offset >> 16) & 0xff; /* 24-bit offset MS bytes */
erasecmd[2] = (offset >> 8) & 0xff; /* 24-bit offset middle bytes */
erasecmd[3] = offset & 0xff; /* 24-bit offset LS bytes */
/* Erase the page */
SPI_SELECT(priv->spi, SPIDEV_FLASH, true);
SPI_SNDBLOCK(priv->spi, erasecmd, 4);
SPI_SELECT(priv->spi, SPIDEV_FLASH, false);
/* Wait for any erase to complete if we are not trying to improve write
* performance. (see comments above).
*/
#ifndef CONFIG_AT45DB_PREWAIT
at45db_waitbusy(priv);
#endif
fvdbg("Erased\n");
}
/************************************************************************************
* Name: at32db_chiperase
************************************************************************************/
static inline int at32db_chiperase(struct at45db_dev_s *priv)
{
fvdbg("priv: %p\n", priv);
/* Higher performance write logic: We leave the chip busy after write and erase
* operations. This improves write and erase performance because we do not have
* to wait as long between transactions (other processing can occur while the chip
* is busy) but means that the chip must stay powered and that we must check if
* the chip is still busy on each entry point.
*/
#ifdef CONFIG_AT45DB_PREWAIT
at45db_waitbusy(priv);
#endif
/* "The entire main memory can be erased at one time by using the Chip Erase
* command. To execute the Chip Erase command, a 4-byte command sequence C7H, 94H,
* 80H and 9AH must be clocked into the device. ... After the last bit of the opcode
* sequence has been clocked in, the CS pin can be deasserted to start the erase
* process. ... the Status Register will indicate that the device is busy. The Chip
* Erase command will not affect sectors that are protected or locked down...
*/
SPI_SELECT(priv->spi, SPIDEV_FLASH, true);
SPI_SNDBLOCK(priv->spi, g_chiperase, CHIP_ERASE_SIZE);
SPI_SELECT(priv->spi, SPIDEV_FLASH, false);
/* Wait for any erase to complete if we are not trying to improve write
* performance. (see comments above).
*/
#ifndef CONFIG_AT45DB_PREWAIT
at45db_waitbusy(priv);
#endif
return OK;
}
/************************************************************************************
* Name: at45db_pgwrite
************************************************************************************/
static inline void at45db_pgwrite(struct at45db_dev_s *priv, FAR const uint8_t *buffer,
off_t page)
{
uint8_t wrcmd [4];
off_t offset = page << priv->pageshift;
fvdbg("page: %08lx offset: %08lx\n", (long)page, (long)offset);
/* We assume that sectors are not write protected */
wrcmd[0] = AT45DB_MNTHRUBF1; /* To main memory through buffer 1 */
wrcmd[1] = (offset >> 16) & 0xff; /* 24-bit address MS byte */
wrcmd[2] = (offset >> 8) & 0xff; /* 24-bit address middle byte */
wrcmd[3] = offset & 0xff; /* 24-bit address LS byte */
/* Higher performance write logic: We leave the chip busy after write and erase
* operations. This improves write and erase performance because we do not have
* to wait as long between transactions (other processing can occur while the chip
* is busy) but means that the chip must stay powered and that we must check if
* the chip is still busy on each entry point.
*/
#ifdef CONFIG_AT45DB_PREWAIT
at45db_waitbusy(priv);
#endif
SPI_SELECT(priv->spi, SPIDEV_FLASH, true);
SPI_SNDBLOCK(priv->spi, wrcmd, 4);
SPI_SNDBLOCK(priv->spi, buffer, 1 << priv->pageshift);
SPI_SELECT(priv->spi, SPIDEV_FLASH, false);
/* Wait for any erase to complete if we are not trying to improve write
* performance. (see comments above).
*/
#ifndef CONFIG_AT45DB_PREWAIT
at45db_waitbusy(priv);
#endif
fvdbg("Written\n");
}
/************************************************************************************
* Name: at45db_erase
************************************************************************************/
static int at45db_erase(FAR struct mtd_dev_s *mtd, off_t startblock, size_t nblocks)
{
FAR struct at45db_dev_s *priv = (FAR struct at45db_dev_s *)mtd;
size_t pgsleft = nblocks;
fvdbg("startblock: %08lx nblocks: %d\n", (long)startblock, (int)nblocks);
/* Take the lock so that we have exclusive access to the bus, then power up the
* FLASH device.
*/
at45db_lock(priv);
at45db_resume(priv);
/* Then erase each page */
while (pgsleft-- > 0)
{
/* Erase each sector */
at45db_pgerase(priv, startblock);
startblock++;
}
at45db_pwrdown(priv);
at45db_unlock(priv);
return (int)nblocks;
}
/************************************************************************************
* Name: at45db_bread
************************************************************************************/
static ssize_t at45db_bread(FAR struct mtd_dev_s *mtd, off_t startblock, size_t nblocks,
FAR uint8_t *buffer)
{
FAR struct at45db_dev_s *priv = (FAR struct at45db_dev_s *)mtd;
ssize_t nbytes;
/* On this device, we can handle the block read just like the byte-oriented read */
nbytes = at45db_read(mtd, startblock << priv->pageshift, nblocks << priv->pageshift, buffer);
if (nbytes > 0)
{
return nbytes >> priv->pageshift;
}
return nbytes;
}
/************************************************************************************
* Name: at45db_bwrite
************************************************************************************/
static ssize_t at45db_bwrite(FAR struct mtd_dev_s *mtd, off_t startblock, size_t nblocks,
FAR const uint8_t *buffer)
{
FAR struct at45db_dev_s *priv = (FAR struct at45db_dev_s *)mtd;
size_t pgsleft = nblocks;
fvdbg("startblock: %08lx nblocks: %d\n", (long)startblock, (int)nblocks);
/* Take the lock so that we have exclusive access to the bus, then power up the
* FLASH device.
*/
at45db_lock(priv);
at45db_resume(priv);
/* Write each page to FLASH */
while (pgsleft-- > 0)
{
at45db_pgwrite(priv, buffer, startblock);
startblock++;
}
at45db_pwrdown(priv);
at45db_unlock(priv);
return nblocks;
}
/************************************************************************************
* Name: at45db_read
************************************************************************************/
static ssize_t at45db_read(FAR struct mtd_dev_s *mtd, off_t offset, size_t nbytes,
FAR uint8_t *buffer)
{
FAR struct at45db_dev_s *priv = (FAR struct at45db_dev_s *)mtd;
uint8_t rdcmd [5];
fvdbg("offset: %08lx nbytes: %d\n", (long)offset, (int)nbytes);
/* Set up for the read */
rdcmd[0] = AT45DB_RDARRAYHF; /* FAST_READ is safe at all supported SPI speeds. */
rdcmd[1] = (offset >> 16) & 0xff; /* 24-bit address upper byte */
rdcmd[2] = (offset >> 8) & 0xff; /* 24-bit address middle byte */
rdcmd[3] = offset & 0xff; /* 24-bit address least significant byte */
rdcmd[4] = 0; /* Dummy byte */
/* Take the lock so that we have exclusive access to the bus, then power up the
* FLASH device.
*/
at45db_lock(priv);
at45db_resume(priv);
/* Higher performance write logic: We leave the chip busy after write and erase
* operations. This improves write and erase performance because we do not have
* to wait as long between transactions (other processing can occur while the chip
* is busy) but means that the chip must stay powered and that we must check if
* the chip is still busy on each entry point.
*/
#ifdef CONFIG_AT45DB_PREWAIT
at45db_waitbusy(priv);
#endif
/* Perform the read */
SPI_SELECT(priv->spi, SPIDEV_FLASH, true);
SPI_SNDBLOCK(priv->spi, rdcmd, 5);
SPI_RECVBLOCK(priv->spi, buffer, nbytes);
SPI_SELECT(priv->spi, SPIDEV_FLASH, false);
at45db_pwrdown(priv);
at45db_unlock(priv);
fvdbg("return nbytes: %d\n", (int)nbytes);
return nbytes;
}
/************************************************************************************
* Name: at45db_ioctl
************************************************************************************/
static int at45db_ioctl(FAR struct mtd_dev_s *mtd, int cmd, unsigned long arg)
{
FAR struct at45db_dev_s *priv = (FAR struct at45db_dev_s *)mtd;
int ret = -EINVAL; /* Assume good command with bad parameters */
fvdbg("cmd: %d \n", cmd);
switch (cmd)
{
case MTDIOC_GEOMETRY:
{
FAR struct mtd_geometry_s *geo = (FAR struct mtd_geometry_s *)((uintptr_t)arg);
if (geo)
{
/* Populate the geometry structure with information need to know
* the capacity and how to access the device.
*
* NOTE: that the device is treated as though it where just an array
* of fixed size blocks. That is most likely not true, but the client
* will expect the device logic to do whatever is necessary to make it
* appear so.
*/
geo->blocksize = (1 << priv->pageshift);
geo->erasesize = geo->blocksize;
geo->neraseblocks = priv->npages;
ret = OK;
fvdbg("blocksize: %d erasesize: %d neraseblocks: %d\n",
geo->blocksize, geo->erasesize, geo->neraseblocks);
}
}
break;
case MTDIOC_BULKERASE:
{
/* Take the lock so that we have exclusive access to the bus, then
* power up the FLASH device.
*/
at45db_lock(priv);
at45db_resume(priv);
/* Erase the entire device */
ret = at32db_chiperase(priv);
at45db_pwrdown(priv);
at45db_unlock(priv);
}
break;
case MTDIOC_XIPBASE:
default:
ret = -ENOTTY; /* Bad command */
break;
}
fvdbg("return %d\n", ret);
return ret;
}
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: at45db_initialize
*
* Description:
* Create an initialize MTD device instance. MTD devices are not registered
* in the file system, but are created as instances that can be bound to
* other functions (such as a block or character driver front end).
*
************************************************************************************/
FAR struct mtd_dev_s *at45db_initialize(FAR struct spi_dev_s *spi)
{
FAR struct at45db_dev_s *priv;
uint8_t sr;
int ret;
fvdbg("spi: %p\n", spi);
/* Allocate a state structure (we allocate the structure instead of using
* a fixed, static allocation so that we can handle multiple FLASH devices.
* The current implementation would handle only one FLASH part per SPI
* device (only because of the SPIDEV_FLASH definition) and so would have
* to be extended to handle multiple FLASH parts on the same SPI bus.
*/
priv = (FAR struct at45db_dev_s *)kmalloc(sizeof(struct at45db_dev_s));
if (priv)
{
/* Initialize the allocated structure */
priv->mtd.erase = at45db_erase;
priv->mtd.bread = at45db_bread;
priv->mtd.bwrite = at45db_bwrite;
priv->mtd.read = at45db_read;
priv->mtd.ioctl = at45db_ioctl;
priv->spi = spi;
/* Deselect the FLASH */
SPI_SELECT(spi, SPIDEV_FLASH, false);
/* Lock and configure the SPI bus. */
at45db_lock(priv);
at45db_resume(priv);
/* Identify the FLASH chip and get its capacity */
ret = at45db_rdid(priv);
if (ret != OK)
{
/* Unrecognized! Discard all of that work we just did and return NULL */
fdbg("Unrecognized\n");
goto errout;
}
/* Get the value of the status register (as soon as the device is ready) */
sr = at45db_waitbusy(priv);
/* Check if the device is configured as 256, 512 or 1024 bytes-per-page device */
if ((sr & AT45DB_SR_PGSIZE) == 0)
{
/* No, re-program it for the binary page size. NOTE: A power cycle
* is required after the device has be re-programmed.
*/
fdbg("Reprogramming page size\n");
SPI_SELECT(priv->spi, SPIDEV_FLASH, true);
SPI_SNDBLOCK(priv->spi, g_binpgsize, BINPGSIZE_SIZE);
SPI_SELECT(priv->spi, SPIDEV_FLASH, false);
goto errout;
}
/* Release the lock and power down the device */
at45db_pwrdown(priv);
at45db_unlock(priv);
}
fvdbg("Return %p\n", priv);
return (FAR struct mtd_dev_s *)priv;
/* On any failure, we need free memory allocations and release the lock that
* we hold on the SPI bus. On failures, assume that we cannot talk to the
* device to do any more.
*/
errout:
at45db_unlock(priv);
kfree(priv);
return NULL;
}
View Git Blame Copy Permalink