forked from Archive/PX4-Autopilot
980 lines
53 KiB
Groovy
980 lines
53 KiB
Groovy
#!/usr/bin/env groovy
|
|
|
|
pipeline {
|
|
agent none
|
|
stages {
|
|
stage('Hardware Test') {
|
|
|
|
parallel {
|
|
|
|
stage("cubepilot_cubeorange_test") {
|
|
stages {
|
|
stage("build cubepilot_cubeorange_test") {
|
|
agent {
|
|
docker {
|
|
image 'px4io/px4-dev-nuttx-focal:2021-09-08'
|
|
args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
|
|
}
|
|
}
|
|
steps {
|
|
checkoutSCM()
|
|
sh 'make cubepilot_cubeorange_test'
|
|
sh 'make cubepilot_cubeorange_test bootloader_elf'
|
|
sh 'ccache -s'
|
|
stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'cubepilot_cubeorange_test'
|
|
}
|
|
post {
|
|
always {
|
|
sh 'make distclean'
|
|
}
|
|
}
|
|
} // stage build
|
|
stage("hardware") {
|
|
agent {
|
|
label 'cubepilot_cubeorange'
|
|
}
|
|
stages {
|
|
stage("flash") {
|
|
steps {
|
|
sh 'export'
|
|
sh 'find /dev/serial'
|
|
unstash 'cubepilot_cubeorange_test'
|
|
sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/cubepilot_cubeorange_test/cubepilot_cubeorange_bootloader.elf'
|
|
// flash board and watch bootup
|
|
sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/cubepilot_cubeorange_test/cubepilot_cubeorange_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
|
|
}
|
|
}
|
|
stage("tests") {
|
|
steps {
|
|
// run tests
|
|
runTests()
|
|
}
|
|
}
|
|
stage("status") {
|
|
steps {
|
|
// configure
|
|
resetParameters()
|
|
sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_RATEMAX" --value "2000"'
|
|
sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "13000"' // generic vtol standard
|
|
sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"' // update bootloader
|
|
checkStatus()
|
|
quickCalibrate()
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status"'
|
|
}
|
|
}
|
|
stage("print topics") {
|
|
steps {
|
|
printTopics()
|
|
}
|
|
}
|
|
}
|
|
post {
|
|
always {
|
|
resetBoard()
|
|
}
|
|
}
|
|
} // stage test
|
|
}
|
|
}
|
|
|
|
stage("cuav_x7pro_test") {
|
|
stages {
|
|
stage("build cuav_x7pro_test") {
|
|
agent {
|
|
docker {
|
|
image 'px4io/px4-dev-nuttx-focal:2021-09-08'
|
|
args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
|
|
}
|
|
}
|
|
steps {
|
|
checkoutSCM()
|
|
sh 'make cuav_x7pro_test'
|
|
sh 'make cuav_x7pro_test bootloader_elf'
|
|
sh 'ccache -s'
|
|
stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'cuav_x7pro_test'
|
|
}
|
|
post {
|
|
always {
|
|
sh 'make distclean'
|
|
}
|
|
}
|
|
} // stage build
|
|
stage("hardware") {
|
|
agent {
|
|
label 'cuav_x7pro'
|
|
}
|
|
stages {
|
|
stage("flash") {
|
|
steps {
|
|
sh 'export'
|
|
sh 'find /dev/serial'
|
|
unstash 'cuav_x7pro_test'
|
|
sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/cuav_x7pro_test/cuav_x7pro_bootloader.elf'
|
|
// flash board and watch bootup
|
|
sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/cuav_x7pro_test/cuav_x7pro_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
|
|
}
|
|
}
|
|
stage("tests") {
|
|
steps {
|
|
runTests()
|
|
}
|
|
}
|
|
stage("status") {
|
|
steps {
|
|
// configure
|
|
resetParameters()
|
|
sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_RATEMAX" --value "2000"'
|
|
sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "13000"' // generic vtol standard
|
|
sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"' // update bootloader
|
|
checkStatus()
|
|
quickCalibrate()
|
|
}
|
|
}
|
|
stage("print topics") {
|
|
steps {
|
|
printTopics()
|
|
}
|
|
}
|
|
}
|
|
post {
|
|
always {
|
|
resetBoard()
|
|
}
|
|
}
|
|
} // stage test
|
|
}
|
|
}
|
|
|
|
stage("px4_fmu-v3_test") {
|
|
stages {
|
|
stage("build px4_fmu-v3_test") {
|
|
agent {
|
|
docker {
|
|
image 'px4io/px4-dev-nuttx-focal:2021-09-08'
|
|
args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
|
|
}
|
|
}
|
|
steps {
|
|
checkoutSCM()
|
|
sh 'make px4_fmu-v3_test'
|
|
sh 'make px4_fmu-v3_test bootloader_elf'
|
|
sh 'ccache -s'
|
|
stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v3_test'
|
|
}
|
|
post {
|
|
always {
|
|
sh 'make distclean'
|
|
}
|
|
}
|
|
} // stage build
|
|
stage("hardware") {
|
|
agent {
|
|
label 'px4_fmu-v3'
|
|
}
|
|
stages {
|
|
stage("flash") {
|
|
steps {
|
|
sh 'export'
|
|
sh 'find /dev/serial'
|
|
unstash 'px4_fmu-v3_test'
|
|
sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v3_test/px4_fmu-v3_bootloader.elf'
|
|
// flash board and watch bootup
|
|
sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v3_test/px4_fmu-v3_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
|
|
}
|
|
}
|
|
stage("tests") {
|
|
steps {
|
|
runTests()
|
|
}
|
|
}
|
|
stage("status") {
|
|
steps {
|
|
// configure
|
|
resetParameters()
|
|
sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "13000"' // generic vtol standard
|
|
sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"' // update bootloader
|
|
checkStatus()
|
|
quickCalibrate()
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status"'
|
|
}
|
|
}
|
|
stage("print topics") {
|
|
steps {
|
|
printTopics()
|
|
}
|
|
}
|
|
}
|
|
post {
|
|
always {
|
|
resetBoard()
|
|
}
|
|
}
|
|
} // stage test
|
|
}
|
|
}
|
|
|
|
stage("px4_fmu-v4_test") {
|
|
stages {
|
|
stage("build px4_fmu-v4_test") {
|
|
agent {
|
|
docker {
|
|
image 'px4io/px4-dev-nuttx-focal:2021-09-08'
|
|
args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
|
|
}
|
|
}
|
|
steps {
|
|
checkoutSCM()
|
|
sh 'make px4_fmu-v4_test'
|
|
sh 'make px4_fmu-v4_test bootloader_elf'
|
|
sh 'ccache -s'
|
|
stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v4_test'
|
|
}
|
|
post {
|
|
always {
|
|
sh 'make distclean'
|
|
}
|
|
}
|
|
} // stage build
|
|
stage("hardware") {
|
|
agent {
|
|
label 'px4_fmu-v4'
|
|
}
|
|
stages {
|
|
stage("flash") {
|
|
steps {
|
|
sh 'export'
|
|
sh 'find /dev/serial'
|
|
unstash 'px4_fmu-v4_test'
|
|
sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4_test/px4_fmu-v4_bootloader.elf'
|
|
// flash board and watch bootup
|
|
sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4_test/px4_fmu-v4_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
|
|
}
|
|
}
|
|
stage("tests") {
|
|
steps {
|
|
runTests()
|
|
}
|
|
}
|
|
stage("status") {
|
|
steps {
|
|
// configure
|
|
resetParameters()
|
|
sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "4001"' // generic quadcopter
|
|
sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"' // update bootloader
|
|
checkStatus()
|
|
quickCalibrate()
|
|
}
|
|
}
|
|
stage("print topics") {
|
|
steps {
|
|
printTopics()
|
|
}
|
|
}
|
|
}
|
|
post {
|
|
always {
|
|
resetBoard()
|
|
}
|
|
}
|
|
} // stage test
|
|
}
|
|
}
|
|
|
|
stage("px4_fmu-v4pro_test") {
|
|
stages {
|
|
stage("build px4_fmu-v4pro_test") {
|
|
agent {
|
|
docker {
|
|
image 'px4io/px4-dev-nuttx-focal:2021-09-08'
|
|
args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
|
|
}
|
|
}
|
|
steps {
|
|
checkoutSCM()
|
|
sh 'make px4_fmu-v4pro_test'
|
|
sh 'make px4_fmu-v4pro_test bootloader_elf'
|
|
sh 'ccache -s'
|
|
stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v4pro_test'
|
|
}
|
|
post {
|
|
always {
|
|
sh 'make distclean'
|
|
}
|
|
}
|
|
} // stage build
|
|
stage("hardware") {
|
|
agent {
|
|
label 'px4_fmu-v4pro'
|
|
}
|
|
stages {
|
|
stage("flash") {
|
|
steps {
|
|
sh 'export'
|
|
sh 'find /dev/serial'
|
|
unstash 'px4_fmu-v4pro_test'
|
|
sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4pro_test/px4_fmu-v4pro_bootloader.elf'
|
|
// flash board and watch bootup
|
|
sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4pro_test/px4_fmu-v4pro_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
|
|
}
|
|
}
|
|
stage("tests") {
|
|
steps {
|
|
runTests()
|
|
}
|
|
}
|
|
stage("status") {
|
|
steps {
|
|
// configure
|
|
resetParameters()
|
|
sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "13000"' // generic vtol standard
|
|
sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"' // update bootloader
|
|
checkStatus()
|
|
quickCalibrate()
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status"'
|
|
}
|
|
}
|
|
stage("print topics") {
|
|
steps {
|
|
printTopics()
|
|
}
|
|
}
|
|
}
|
|
post {
|
|
always {
|
|
resetBoard()
|
|
}
|
|
}
|
|
} // stage test
|
|
}
|
|
}
|
|
|
|
stage("px4_fmu-v5_debug") {
|
|
stages {
|
|
stage("build px4_fmu-v5_debug") {
|
|
agent {
|
|
docker {
|
|
image 'px4io/px4-dev-nuttx-focal:2021-09-08'
|
|
args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
|
|
}
|
|
}
|
|
steps {
|
|
checkoutSCM()
|
|
sh 'make px4_fmu-v5_debug'
|
|
sh 'make px4_fmu-v5_debug bootloader_elf'
|
|
sh 'ccache -s'
|
|
stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v5_debug'
|
|
}
|
|
post {
|
|
always {
|
|
sh 'make distclean'
|
|
}
|
|
}
|
|
} // stage build
|
|
stage("hardware") {
|
|
agent {
|
|
label 'px4_fmu-v5'
|
|
}
|
|
stages {
|
|
stage("flash") {
|
|
steps {
|
|
sh 'export'
|
|
sh 'find /dev/serial'
|
|
unstash 'px4_fmu-v5_debug'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 0" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 200" || true' // limit cpu usage
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true' // limit cpu usage
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true' // limit cpu usage
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save" || true'
|
|
sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_debug/px4_fmu-v5_bootloader.elf'
|
|
// flash board and watch bootup
|
|
sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_debug/px4_fmu-v5_debug.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600 || true'
|
|
}
|
|
}
|
|
stage("tests") {
|
|
steps {
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'
|
|
//sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_stress"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb_tests"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb_tests latency_test" || true'
|
|
}
|
|
}
|
|
stage("status") {
|
|
steps {
|
|
// configure
|
|
resetParameters()
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001" || true' // generic quadcopter
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 200" || true' // limit cpu usage
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true' // limit cpu usage
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true' // limit cpu usage
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SDLOG_MODE -1" || true' // limit cpu usage
|
|
checkStatus()
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
|
|
}
|
|
}
|
|
stage("print topics") {
|
|
steps {
|
|
printTopics()
|
|
}
|
|
}
|
|
}
|
|
post {
|
|
always {
|
|
resetBoard()
|
|
}
|
|
}
|
|
} // stage test
|
|
}
|
|
}
|
|
|
|
stage("px4_fmu-v5_stackcheck") {
|
|
stages {
|
|
stage("build px4_fmu-v5_stackcheck") {
|
|
agent {
|
|
docker {
|
|
image 'px4io/px4-dev-nuttx-focal:2021-09-08'
|
|
args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
|
|
}
|
|
}
|
|
steps {
|
|
checkoutSCM()
|
|
sh 'make px4_fmu-v5_stackcheck'
|
|
sh 'make px4_fmu-v5_stackcheck bootloader_elf'
|
|
sh 'ccache -s'
|
|
stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v5_stackcheck'
|
|
}
|
|
post {
|
|
always {
|
|
sh 'make distclean'
|
|
}
|
|
}
|
|
} // stage build
|
|
stage("hardware") {
|
|
agent {
|
|
label 'px4_fmu-v5'
|
|
}
|
|
stages {
|
|
stage("flash") {
|
|
steps {
|
|
sh 'export'
|
|
sh 'find /dev/serial'
|
|
unstash 'px4_fmu-v5_stackcheck'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 0" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 200" || true' // limit cpu usage
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true' // limit cpu usage
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true' // limit cpu usage
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save" || true'
|
|
sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_stackcheck/px4_fmu-v5_bootloader.elf'
|
|
// flash board and watch bootup
|
|
sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_stackcheck/px4_fmu-v5_stackcheck.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
|
|
}
|
|
}
|
|
stage("tests") {
|
|
steps {
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb_tests"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb_tests latency_test" || true'
|
|
}
|
|
}
|
|
stage("status") {
|
|
steps {
|
|
// configure
|
|
resetParameters()
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001" || true' // generic quadcopter
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 200" || true' // limit cpu usage
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true' // limit cpu usage
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true' // limit cpu usage
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SDLOG_MODE -1" || true' // limit cpu usage
|
|
checkStatus()
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
|
|
}
|
|
}
|
|
stage("print topics") {
|
|
steps {
|
|
printTopics()
|
|
}
|
|
}
|
|
}
|
|
post {
|
|
always {
|
|
resetBoard()
|
|
}
|
|
}
|
|
} // stage test
|
|
}
|
|
}
|
|
|
|
stage("px4_fmu-v5_test") {
|
|
stages {
|
|
stage("build px4_fmu-v5_test") {
|
|
agent {
|
|
docker {
|
|
image 'px4io/px4-dev-nuttx-focal:2021-09-08'
|
|
args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
|
|
}
|
|
}
|
|
steps {
|
|
checkoutSCM()
|
|
sh 'make px4_fmu-v5_test'
|
|
sh 'make px4_fmu-v5_test bootloader_elf'
|
|
sh 'ccache -s'
|
|
stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v5_test'
|
|
}
|
|
post {
|
|
always {
|
|
sh 'make distclean'
|
|
}
|
|
}
|
|
} // stage build
|
|
stage("hardware") {
|
|
agent {
|
|
label 'px4_fmu-v5'
|
|
}
|
|
stages {
|
|
stage("flash") {
|
|
steps {
|
|
sh 'export'
|
|
sh 'find /dev/serial'
|
|
unstash 'px4_fmu-v5_test'
|
|
sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_test/px4_fmu-v5_bootloader.elf'
|
|
// flash board and watch bootup
|
|
sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_test/px4_fmu-v5_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
|
|
}
|
|
}
|
|
stage("tests") {
|
|
steps {
|
|
runTests()
|
|
}
|
|
}
|
|
stage("status") {
|
|
steps {
|
|
// configure
|
|
resetParameters()
|
|
sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "4001"' // generic quadcopter
|
|
sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"' // update bootloader
|
|
checkStatus()
|
|
quickCalibrate()
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
|
|
}
|
|
}
|
|
stage("print topics") {
|
|
steps {
|
|
printTopics()
|
|
}
|
|
}
|
|
}
|
|
post {
|
|
always {
|
|
resetBoard()
|
|
}
|
|
}
|
|
} // stage test
|
|
}
|
|
}
|
|
|
|
// stage("modalai_fc-v1_test") {
|
|
// stages {
|
|
// stage("build modalai_fc-v1_test") {
|
|
// agent {
|
|
// docker {
|
|
// image 'px4io/px4-dev-nuttx-focal:2021-09-08'
|
|
// args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
|
|
// }
|
|
// }
|
|
// steps {
|
|
// checkout scm
|
|
// sh 'export'
|
|
// sh 'make distclean'
|
|
// sh 'ccache -s'
|
|
// sh 'git fetch --tags'
|
|
// sh 'make modalai_fc-v1_test'
|
|
// sh 'make modalai_fc-v1_test bootloader_elf'
|
|
// sh 'ccache -s'
|
|
// stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'modalai_fc-v1_test'
|
|
// }
|
|
// post {
|
|
// always {
|
|
// sh 'make distclean'
|
|
// }
|
|
// }
|
|
// } // stage build
|
|
// stage("hardware") {
|
|
// agent {
|
|
// label 'modalai_fc-v1'
|
|
// }
|
|
// stages {
|
|
// stage("flash") {
|
|
// steps {
|
|
// sh 'export'
|
|
// sh 'find /dev/serial'
|
|
// unstash 'modalai_fc-v1_test'
|
|
// sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/modalai_fc-v1_test/modalai_fc-v1_bootloader.elf'
|
|
// // flash board and watch bootup
|
|
// sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/modalai_fc-v1_test/modalai_fc-v1_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
|
|
// }
|
|
// }
|
|
// stage("tests") {
|
|
// steps {
|
|
// runTests()
|
|
// }
|
|
// }
|
|
// stage("status") {
|
|
// steps {
|
|
// // configure
|
|
// resetParameters()
|
|
// sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "4001"' // generic quadcopter
|
|
// sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"' // update bootloader
|
|
// checkStatus()
|
|
// quickCalibrate()
|
|
// }
|
|
// }
|
|
// stage("print topics") {
|
|
// steps {
|
|
// printTopics()
|
|
// }
|
|
// }
|
|
|
|
// }
|
|
// } // stage test
|
|
// }
|
|
// }
|
|
|
|
stage("nxp_fmuk66-v3_test") {
|
|
stages {
|
|
stage("build nxp_fmuk66-v3_test") {
|
|
agent {
|
|
docker {
|
|
image 'px4io/px4-dev-nuttx-focal:2021-09-08'
|
|
args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
|
|
}
|
|
}
|
|
steps {
|
|
checkoutSCM()
|
|
sh 'make nxp_fmuk66-v3_test'
|
|
//sh 'make nxp_fmuk66-v3_test bootloader_elf'
|
|
sh 'ccache -s'
|
|
stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'nxp_fmuk66-v3_test'
|
|
}
|
|
post {
|
|
always {
|
|
sh 'make distclean'
|
|
}
|
|
}
|
|
} // stage build
|
|
stage("hardware") {
|
|
agent {
|
|
label 'nxp_fmuk66-v3'
|
|
}
|
|
stages {
|
|
stage("flash") {
|
|
steps {
|
|
sh 'export'
|
|
sh 'find /dev/serial'
|
|
unstash 'nxp_fmuk66-v3_test'
|
|
//sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/nxp_fmuk66-v3_test/nxp_fmuk66-v3_bootloader.elf'
|
|
// flash board and watch bootup
|
|
sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/nxp_fmuk66-v3_test/nxp_fmuk66-v3_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
|
|
}
|
|
}
|
|
stage("tests") {
|
|
steps {
|
|
runTests()
|
|
}
|
|
}
|
|
stage("status") {
|
|
steps {
|
|
// configure
|
|
resetParameters()
|
|
sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_RATEMAX" --value "400"'
|
|
sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "4001"' // generic quadcopter
|
|
sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"' // update bootloader
|
|
checkStatus()
|
|
quickCalibrate()
|
|
}
|
|
}
|
|
stage("print topics") {
|
|
steps {
|
|
printTopics()
|
|
}
|
|
}
|
|
}
|
|
post {
|
|
always {
|
|
resetBoard()
|
|
}
|
|
}
|
|
} // stage test
|
|
}
|
|
}
|
|
|
|
} // parallel
|
|
} // stage Hardware Test
|
|
} // stages
|
|
environment {
|
|
CCACHE_DIR = '/tmp/ccache'
|
|
CCACHE_NOHASHDIR = 1
|
|
CI = true
|
|
}
|
|
options {
|
|
buildDiscarder(logRotator(numToKeepStr: '30', artifactDaysToKeepStr: '60'))
|
|
timeout(time: 180, unit: 'MINUTES')
|
|
skipDefaultCheckout()
|
|
}
|
|
}
|
|
|
|
void checkoutSCM() {
|
|
retry(3) {
|
|
checkout scm
|
|
sh 'export'
|
|
sh 'make distclean'
|
|
sh 'git fetch --tags'
|
|
sh 'ccache -z'
|
|
}
|
|
}
|
|
|
|
void quickCalibrate() {
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate accel quick; sleep 1; param show CAL_ACC*"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate gyro; sleep 1; param show CAL_GYRO*"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate level; sleep 1; param show SENS_BOARD*"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate mag quick; sleep 1; param show CAL_MAG*"'
|
|
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "gyro_calibration status; param show CAL_GYRO*"'
|
|
}
|
|
|
|
void checkStatus() {
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show SYS*"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true' // reboot to apply
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show SYS*"'
|
|
|
|
// run logger
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sleep 1"' // sleep before continuing
|
|
// status commands
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/meminfo"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/uptime"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander check" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander status"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "dataman status"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "df"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ekf2 status"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "free"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "gps status"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener cpuload; top once; listener cpuload"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger status" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /bin"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /dev"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /etc"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /obj"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /proc"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mavlink status streams" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mavlink status" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mount"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd status"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "perf latency"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "perf"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ps"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "pwm info -d /dev/pwm_output0"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "pwm info -d /dev/pwm_output1" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "pwm_out status"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors status"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uavcan status" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb status"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb top -1 -a"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ver all"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'
|
|
// stop logger
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off" || true'
|
|
}
|
|
|
|
void resetParameters() {
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param reset_all"'
|
|
sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "CBRK_BUZZER" --value "782097"'
|
|
sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SDLOG_DIRS_MAX" --value "1"'
|
|
}
|
|
|
|
void runTests() {
|
|
resetParameters()
|
|
|
|
sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_CAL_EN" --value "0" || true' // disable during testing
|
|
sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_FFT_EN" --value "0" || true' // disable during testing
|
|
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true' // reboot to apply
|
|
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'
|
|
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander_tests" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "controllib_test"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "lightware_laser_test"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mavlink_tests" || true' // TODO
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb_tests"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb_tests latency_test" || true'
|
|
|
|
sh './Tools/HIL/run_tests.py --device `find /dev/serial -name *usb-*`'
|
|
|
|
//sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "tests file" || true'
|
|
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd readtest"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd rwtest"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd erase"'
|
|
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench -u"'
|
|
|
|
//sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_stress"'
|
|
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors stop"' // ignore irrelevant sensor timeouts during microbenchmarks
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "microbench all"'
|
|
|
|
// test rebooting multiple times
|
|
resetParameters()
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CBRK*; param show SYS*"' // check that CBRK_BUZZER and SYS_AUTOSTART haven't been lost
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CBRK*; param show SYS*"' // check that CBRK_BUZZER and SYS_AUTOSTART haven't been lost
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CBRK*; param show SYS*"' // check that CBRK_BUZZER and SYS_AUTOSTART haven't been lost
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CBRK*; param show SYS*"' // check that CBRK_BUZZER and SYS_AUTOSTART haven't been lost
|
|
}
|
|
|
|
void printTopics() {
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /obj"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb status"'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb top -1 -a"'
|
|
|
|
// these are for casually inspecting the system, output failure doesn't matter
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener actuator_armed" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener actuator_controls_0" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener actuator_controls_1" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener actuator_controls_2" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener actuator_controls_3" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener actuator_outputs" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener adc_report" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener airspeed_validated" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener airspeed_wind" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener battery_status" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener commander_state" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener cpuload" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener distance_sensor" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener ekf2_timestamps" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener ekf_gps_drift" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener esc_status" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_attitude" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_baro_bias" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_event_flags" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_global_position" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovation_test_ratios" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovation_variances" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovations" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_local_position" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_odometry" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_optical_flow_vel" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_selector_status" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_sensor_bias" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_states" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_status" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_status_flags" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_wind" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener event" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener heater_status" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener input_rc" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener led_control" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener log_message" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener logger_status" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener manual_control_setpoint" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener mavlink_log" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener mission" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener multirotor_motor_limits" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener optical_flow" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener parameter_update" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener position_controller_landing_status" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener position_setpoint_triplet" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener radio_status" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener rate_ctrl_status" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener safety" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_accel" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_accel_fifo" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_baro" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_combined" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_gyro" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_gyro_fft" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_gyro_fifo" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_mag" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_preflight_mag" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_selection" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensors_status_imu" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener system_power" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener task_stack_info" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener telemetry_status" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener test_motor" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener trajectory_setpoint" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener tune_control" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_acceleration" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_air_data" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_angular_acceleration" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_angular_velocity" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_attitude" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_attitude_setpoint" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_command" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_command_ack" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_control_mode" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_global_position" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_imu" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_imu_status" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_land_detected" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_local_position" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_local_position_setpoint" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_magnetometer" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_odometry" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_rates_setpoint" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_status" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_status_flags" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vtol_vehicle_status" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener yaw_estimator_status" || true'
|
|
}
|
|
|
|
void resetBoard() {
|
|
resetParameters()
|
|
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 0" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 200" || true' // limit cpu usage
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true' // limit cpu usage
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true' // limit cpu usage
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SDLOG_MODE -1" || true' // limit cpu usage
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true' // reboot to apply
|
|
|
|
// check SD card
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "df -h" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /fs/microsd" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /proc/fs" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/blocks" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/mount" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/usage" || true'
|
|
// format
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "dataman stop" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "umount /fs/microsd" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mkfatfs -F 32 /dev/mmcsd0" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once" || true'
|
|
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mount -t vfat /dev/mmcsd0 /fs/microsd" || true'
|
|
// check SD card
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "df -h" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /fs/microsd" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /proc/fs" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/blocks" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/mount" || true'
|
|
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/usage" || true'
|
|
}
|