px4-firmware/validation/module_schema.yaml

# Cerberus Validation Schema for module configuration files.
# See http://docs.python-cerberus.org/en/stable/validation-rules.html


module_name:
    # human-readable module name (used for descriptions, can contain spaces)
    type: string
    required: true

serial_config:
    # UART configuration (optional)
    # A module can register autostart command(s) that are associated with a
    # configuration parameter, so that a user can select on which serial port to
    # run the command.
    # One or several commands can be defined.
    type: list
    minlength: 1
    schema:
        type: dict
        schema:
            command:
                # script command that is executed on autostart.
                # These variables can be used:
                #  ${SERIAL_DEV}       Serial device (e.g. /dev/ttyS1)
                #  ${BAUD_PARAM}       param name for the baudrate
                #  ${i}                instance in [0, N-1] (for multi-instance commands)
                # It's possible to use multiple lines.
                type: string
                required: true

            port_config_param:
                # Parameter definition to configure on which port to run the
                # command
                type: dict
                required: true
                schema:
                    name:
                        # Parameter name (e.g. TEL_FRSKY_CONFIG, MAV_${i}_CONFIG)
                        type: string
                        regex: '[0-9A-Z_]+(\$\{i\}[0-9A-Z_]*)?_(CONFIG|CFG)'
                        required: true
                    group:
                        # Associated parameter group (e.g. GPS)
                        type: string
                        required: true
                    default:
                        # Default value(s). This can be a string to specify the
                        # serial tag (e.g. GPS1, TEL1, ...) or a list of strings
                        # for multiple instances.
                        # If omitted, the command is disabled by default.
                        anyof:
                            - type: string
                            - type: list
                              minlength: 1
                              schema:
                                  type: string
            label:
                # Optional command label (e.g. used in the autostart script).
                # If omitted, module_name is used.
                type: string
            num_instances:
                # Allow to configure and run multiple instances of a command.
                # For multiple instances, '${i}' can be used to refer to
                # an instance, for example in the parameter name or script
                # command.
                # Default: 1
                type: integer
                min: 1


parameters:
    # Parameter definitions.
    # This is a list of parameter groups, where each group has one or more
    # parameter definitions.
    type: list
    minlength: 1
    schema:
        type: dict
        schema:
            group:
                # Parameter group (should be short)
                # This applies to all parameters in the definitions dictionary
                type: string
                required: true
            definitions:
                type: dict
                keyschema:
                    type: string
                    regex: '[0-9A-Z_]+(\$\{i\}[0-9A-Z_]*)?'
                valueschema:
                    type: dict
                    schema:
                        description:
                            type: dict
                            required: true
                            schema:
                                short:
                                    # Short description (one line)
                                    type: string
                                    required: true
                                long:
                                    # Long description (can be multiple lines)
                                    type: string
                                    required: true

                        type:
                            # Define the parameter type
                            required: true
                            type: string
                            allowed: ['int32', 'float', 'boolean', 'enum', 'bitmask' ]
                        min:
                            # Optional minimum value (only for int32 or float)
                            type: number
                        max:
                            # Optional maximum value (only for int32 or float)
                            type: number
                        unit:
                            # Optional parameter unit (only for int32 or float)
                            # (Extend this list as needed)
                            type: string
                            allowed: [
                                '%', 'Hz', 'mAh',
                                'rad', '%/rad', 'rad/s',
                                'bit/s', 'B/s',
                                'deg', 'deg*1e7', 'deg/s',
                                'celcius', 'gauss', 'gauss/s', 'mgauss', 'mgauss^2',
                                'hPa', 'kg', 'kg/m^2',
                                'mm', 'm', 'm/s', 'm/s^2', 'm/s^3', 'm/s^2/sqrt(Hz)', 'm/s/rad',
                                'Ohm',
                                'us', 'ms', 's' ]
                        bit:
                            # description of all bits for type bitmask.
                            # The first bit is 0.
                            type: dict
                            keyschema:
                                type: integer
                            valueschema:
                                type: string

                        values:
                            # enumeration of possible values for type enum
                            type: dict
                            keyschema:
                                type: integer
                            valueschema:
                                type: string

                        default:
                            # Default value(s). This is an integer or a float,
                            # or a list of values for multiple instances.
                            required: true
                            anyof:
                                - type: boolean
                                - type: number
                                - type: list
                                  minlength: 1
                                  schema:
                                      anyof:
                                          - type: boolean
                                          - type: number
                                          - type: list

                        category:
                            # Optional parameter category
                            type: string
                            allowed: [ 'Developer', 'System' ]
                        volatile:
                            # Optional volatile flag. Set to true if the
                            # parameter can be changed by the system
                            # automatially
                            type: boolean
                        reboot_required:
                            # set to true, if changing of the parameter requires
                            # a reboot to take effect
                            type: boolean
                        num_instances:
                            # Optional number of instances.
                            # For multiple instances, '${i}' can be used to
                            # refer to an instance, for example in the parameter
                            # name or description.
                            # Default: 1
                            type: integer
                            min: 1
                        instance_start:
                            # The value of the first instance for multiple
                            # instances, used in '${i}'. If 0, ${i} expands to
                            # [0, N-1]
                            # Default: 0
                            type: integer