forked from Archive/PX4-Autopilot
116 lines
4.9 KiB
Plaintext
116 lines
4.9 KiB
Plaintext
# Encodes the system state of the vehicle published by commander
|
|
|
|
uint64 timestamp # time since system start (microseconds)
|
|
|
|
uint64 armed_time # Arming timestamp (microseconds)
|
|
uint64 takeoff_time # Takeoff timestamp (microseconds)
|
|
|
|
uint8 arming_state
|
|
uint8 ARMING_STATE_INIT = 0
|
|
uint8 ARMING_STATE_STANDBY = 1
|
|
uint8 ARMING_STATE_ARMED = 2
|
|
uint8 ARMING_STATE_STANDBY_ERROR = 3
|
|
uint8 ARMING_STATE_SHUTDOWN = 4
|
|
uint8 ARMING_STATE_IN_AIR_RESTORE = 5
|
|
uint8 ARMING_STATE_MAX = 6
|
|
|
|
uint8 latest_arming_reason
|
|
uint8 latest_disarming_reason
|
|
uint8 ARM_DISARM_REASON_TRANSITION_TO_STANDBY = 0
|
|
uint8 ARM_DISARM_REASON_RC_STICK = 1
|
|
uint8 ARM_DISARM_REASON_RC_SWITCH = 2
|
|
uint8 ARM_DISARM_REASON_COMMAND_INTERNAL = 3
|
|
uint8 ARM_DISARM_REASON_COMMAND_EXTERNAL = 4
|
|
uint8 ARM_DISARM_REASON_MISSION_START = 5
|
|
uint8 ARM_DISARM_REASON_SAFETY_BUTTON = 6
|
|
uint8 ARM_DISARM_REASON_AUTO_DISARM_LAND = 7
|
|
uint8 ARM_DISARM_REASON_AUTO_DISARM_PREFLIGHT = 8
|
|
uint8 ARM_DISARM_REASON_KILL_SWITCH = 9
|
|
uint8 ARM_DISARM_REASON_LOCKDOWN = 10
|
|
uint8 ARM_DISARM_REASON_FAILURE_DETECTOR = 11
|
|
uint8 ARM_DISARM_REASON_SHUTDOWN = 12
|
|
uint8 ARM_DISARM_REASON_UNIT_TEST = 13
|
|
|
|
uint64 nav_state_timestamp # time when current nav_state activated
|
|
|
|
# Navigation state "what should vehicle do"
|
|
uint8 nav_state
|
|
uint8 NAVIGATION_STATE_MANUAL = 0 # Manual mode
|
|
uint8 NAVIGATION_STATE_ALTCTL = 1 # Altitude control mode
|
|
uint8 NAVIGATION_STATE_POSCTL = 2 # Position control mode
|
|
uint8 NAVIGATION_STATE_AUTO_MISSION = 3 # Auto mission mode
|
|
uint8 NAVIGATION_STATE_AUTO_LOITER = 4 # Auto loiter mode
|
|
uint8 NAVIGATION_STATE_AUTO_RTL = 5 # Auto return to launch mode
|
|
uint8 NAVIGATION_STATE_UNUSED3 = 8 # Free slot
|
|
uint8 NAVIGATION_STATE_UNUSED = 9 # Free slot
|
|
uint8 NAVIGATION_STATE_ACRO = 10 # Acro mode
|
|
uint8 NAVIGATION_STATE_UNUSED1 = 11 # Free slot
|
|
uint8 NAVIGATION_STATE_DESCEND = 12 # Descend mode (no position control)
|
|
uint8 NAVIGATION_STATE_TERMINATION = 13 # Termination mode
|
|
uint8 NAVIGATION_STATE_OFFBOARD = 14
|
|
uint8 NAVIGATION_STATE_STAB = 15 # Stabilized mode
|
|
uint8 NAVIGATION_STATE_UNUSED2 = 16 # Free slot
|
|
uint8 NAVIGATION_STATE_AUTO_TAKEOFF = 17 # Takeoff
|
|
uint8 NAVIGATION_STATE_AUTO_LAND = 18 # Land
|
|
uint8 NAVIGATION_STATE_AUTO_FOLLOW_TARGET = 19 # Auto Follow
|
|
uint8 NAVIGATION_STATE_AUTO_PRECLAND = 20 # Precision land with landing target
|
|
uint8 NAVIGATION_STATE_ORBIT = 21 # Orbit in a circle
|
|
uint8 NAVIGATION_STATE_AUTO_VTOL_TAKEOFF = 22 # Takeoff, transition, establish loiter
|
|
uint8 NAVIGATION_STATE_MAX = 23
|
|
|
|
# Bitmask of detected failures
|
|
uint16 failure_detector_status
|
|
uint16 FAILURE_NONE = 0
|
|
uint16 FAILURE_ROLL = 1 # (1 << 0)
|
|
uint16 FAILURE_PITCH = 2 # (1 << 1)
|
|
uint16 FAILURE_ALT = 4 # (1 << 2)
|
|
uint16 FAILURE_EXT = 8 # (1 << 3)
|
|
uint16 FAILURE_ARM_ESC = 16 # (1 << 4)
|
|
uint16 FAILURE_BATTERY = 32 # (1 << 5)
|
|
uint16 FAILURE_IMBALANCED_PROP = 64 # (1 << 6)
|
|
uint16 FAILURE_MOTOR = 128 # (1 << 7)
|
|
|
|
uint8 hil_state
|
|
uint8 HIL_STATE_OFF = 0
|
|
uint8 HIL_STATE_ON = 1
|
|
|
|
# If it's a VTOL, then the value will be VEHICLE_TYPE_ROTARY_WING while flying as a multicopter, and VEHICLE_TYPE_FIXED_WING when flying as a fixed-wing
|
|
uint8 vehicle_type
|
|
uint8 VEHICLE_TYPE_UNKNOWN = 0
|
|
uint8 VEHICLE_TYPE_ROTARY_WING = 1
|
|
uint8 VEHICLE_TYPE_FIXED_WING = 2
|
|
uint8 VEHICLE_TYPE_ROVER = 3
|
|
uint8 VEHICLE_TYPE_AIRSHIP = 4
|
|
|
|
bool failsafe # true if system is in failsafe state (e.g.:RTL, Hover, Terminate, ...)
|
|
uint64 failsafe_timestamp # time when failsafe was activated
|
|
|
|
# Link loss
|
|
bool rc_signal_lost # true if RC reception lost
|
|
bool data_link_lost # datalink to GCS lost
|
|
uint8 data_link_lost_counter # counts unique data link lost events
|
|
bool high_latency_data_link_lost # Set to true if the high latency data link (eg. RockBlock Iridium 9603 telemetry module) is lost
|
|
|
|
# VTOL flags
|
|
bool is_vtol # True if the system is VTOL capable
|
|
bool is_vtol_tailsitter # True if the system performs a 90° pitch down rotation during transition from MC to FW
|
|
bool in_transition_mode # True if VTOL is doing a transition
|
|
bool in_transition_to_fw # True if VTOL is doing a transition from MC to FW
|
|
|
|
bool mission_failure # Set to true if mission could not continue/finish
|
|
bool geofence_violated
|
|
|
|
# MAVLink identification
|
|
uint8 system_type # system type, contains mavlink MAV_TYPE
|
|
uint8 system_id # system id, contains MAVLink's system ID field
|
|
uint8 component_id # subsystem / component id, contains MAVLink's component ID field
|
|
|
|
# see SYS_STATUS mavlink message for the following
|
|
# lower 32 bits are for the base flags, higher 32 bits are or the extended flags
|
|
uint64 onboard_control_sensors_present
|
|
uint64 onboard_control_sensors_enabled
|
|
uint64 onboard_control_sensors_health
|
|
|
|
bool safety_button_available # Set to true if a safety button is connected
|
|
bool safety_off # Set to true if safety is off
|