px4-firmware/makefiles/firmware.mk

382 lines
12 KiB
Makefile

#
# Copyright (C) 2012 PX4 Development Team. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name PX4 nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
#
# Generic Makefile for PX4 firmware images.
#
# Requires:
#
# BOARD
# Must be set to a board name known to the PX4 distribution (as
# we need a corresponding NuttX export archive to link with).
#
# Optional:
#
# MODULES
# Contains a list of module paths or path fragments used
# to find modules. The names listed here are searched in
# the following directories:
# <absolute path>
# $(MODULE_SEARCH_DIRS)
# WORK_DIR
# MODULE_SRC
# PX4_MODULE_SRC
#
# Application directories are expected to contain a module.mk
# file which provides build configuration for the module. See
# makefiles/module.mk for more details.
#
# BUILTIN_COMMANDS
# Contains a list of built-in commands not explicitly provided
# by modules / libraries. Each entry in this list is formatted
# as <command>.<priority>.<stacksize>.<entrypoint>
#
# PX4_BASE:
# Points to a PX4 distribution. Normally determined based on the
# path to this file.
#
# CONFIG:
# Used when searching for the configuration file, and available
# to module Makefiles to select optional features.
# If not set, CONFIG_FILE must be set and CONFIG will be derived
# automatically from it.
#
# CONFIG_FILE:
# If set, overrides the configuration file search logic. Sets
# CONFIG to the name of the configuration file, strips any
# leading config_ prefix and any suffix. e.g. config_board_foo.mk
# results in CONFIG being set to 'board_foo'.
#
# WORK_DIR:
# Sets the directory in which the firmware will be built. Defaults
# to the directory 'build' under the directory containing the
# parent Makefile.
#
# ROMFS_ROOT:
# If set to the path to a directory, a ROMFS image will be generated
# containing the files under the directory and linked into the final
# image.
#
# MODULE_SEARCH_DIRS:
# Extra directories to search first for MODULES before looking in the
# usual places.
#
################################################################################
# Paths and configuration
################################################################################
#
# Work out where this file is, so we can find other makefiles in the
# same directory.
#
# If PX4_BASE wasn't set previously, work out what it should be
# and set it here now.
#
MK_DIR ?= $(dir $(firstword $(MAKEFILE_LIST)))
ifeq ($(PX4_BASE),)
export PX4_BASE := $(abspath $(MK_DIR)/..)
endif
$(info % PX4_BASE = $(PX4_BASE))
ifneq ($(words $(PX4_BASE)),1)
$(error Cannot build when the PX4_BASE path contains one or more space characters.)
endif
$(info % GIT_DESC = $(GIT_DESC))
#
# Set a default target so that included makefiles or errors here don't
# cause confusion.
#
# XXX We could do something cute here with $(DEFAULT_GOAL) if it's not one
# of the maintenance targets and set CONFIG based on it.
#
all: firmware
#
# Get path and tool config
#
include $(MK_DIR)/setup.mk
#
# Locate the configuration file
#
ifneq ($(CONFIG_FILE),)
CONFIG := $(subst config_,,$(basename $(notdir $(CONFIG_FILE))))
else
CONFIG_FILE := $(wildcard $(PX4_MK_DIR)/$(PX4_TARGET_OS)/config_$(CONFIG).mk)
endif
ifeq ($(CONFIG),)
$(error Missing configuration name or file (specify with CONFIG=<config>))
endif
export CONFIG
include $(CONFIG_FILE)
$(info % CONFIG = $(CONFIG))
#
# Sanity-check the BOARD variable and then get the board config.
# If BOARD was not set by the configuration, extract it automatically.
#
# The board config in turn will fetch the toolchain configuration.
#
ifeq ($(BOARD),)
BOARD := $(firstword $(subst _, ,$(CONFIG)))
endif
BOARD_FILE := $(wildcard $(PX4_MK_DIR)/$(PX4_TARGET_OS)/board_$(BOARD).mk)
ifeq ($(BOARD_FILE),)
$(error Config $(CONFIG) references board $(BOARD), but no board definition file found)
endif
export BOARD
export BOARD_FILE
include $(BOARD_FILE)
$(info % BOARD = $(BOARD))
#
# If WORK_DIR is not set, create a 'build' directory next to the
# parent Makefile.
#
PARENT_MAKEFILE := $(lastword $(filter-out $(lastword $(MAKEFILE_LIST)),$(MAKEFILE_LIST)))
ifeq ($(WORK_DIR),)
export WORK_DIR := $(dir $(PARENT_MAKEFILE))build/
endif
$(info % WORK_DIR = $(WORK_DIR))
#
# Things that, if they change, might affect everything
#
GLOBAL_DEPS += $(MAKEFILE_LIST)
#
# Extra things we should clean
#
EXTRA_CLEANS =
#
# Append the per-board driver directory to the header search path.
#
INCLUDE_DIRS += $(PX4_MODULE_SRC)drivers/boards/$(BOARD)
################################################################################
# OS specific libraries and paths
################################################################################
include $(PX4_MK_DIR)/$(PX4_TARGET_OS)/$(PX4_TARGET_OS).mk
################################################################################
# Modules
################################################################################
# where to look for modules
MODULE_SEARCH_DIRS += $(WORK_DIR) $(MODULE_SRC) $(PX4_MODULE_SRC)
# sort and unique the modules list
MODULES := $(sort $(MODULES))
# locate the first instance of a module by full path or by looking on the
# module search path
define MODULE_SEARCH
$(firstword $(abspath $(wildcard $(1)/module.mk)) \
$(abspath $(foreach search_dir,$(MODULE_SEARCH_DIRS),$(wildcard $(search_dir)/$(1)/module.mk))) \
MISSING_$1)
endef
# make a list of module makefiles and check that we found them all
MODULE_MKFILES := $(foreach module,$(MODULES),$(call MODULE_SEARCH,$(module)))
MISSING_MODULES := $(subst MISSING_,,$(filter MISSING_%,$(MODULE_MKFILES)))
ifneq ($(MISSING_MODULES),)
$(error Cant find module(s): $(MISSING_MODULES))
endif
# Make a list of the object files we expect to build from modules
# Note that this path will typically contain a double-slash at the WORK_DIR boundary; this must be
# preserved as it is used below to get the absolute path for the module.mk file correct.
#
MODULE_OBJS := $(foreach path,$(dir $(MODULE_MKFILES)),$(WORK_DIR)$(path)module.pre.o)
# rules to build module objects
.PHONY: $(MODULE_OBJS)
$(MODULE_OBJS): relpath = $(patsubst $(WORK_DIR)%,%,$@)
$(MODULE_OBJS): mkfile = $(patsubst %module.pre.o,%module.mk,$(relpath))
$(MODULE_OBJS): workdir = $(@D)
$(MODULE_OBJS): $(GLOBAL_DEPS) $(NUTTX_CONFIG_HEADER)
$(Q) $(MKDIR) -p $(workdir)
$(Q) $(MAKE) -r -f $(PX4_MK_DIR)module.mk \
-C $(workdir) \
MODULE_WORK_DIR=$(workdir) \
MODULE_OBJ=$@ \
MODULE_MK=$(mkfile) \
MODULE_NAME=$(lastword $(subst /, ,$(workdir))) \
module
# make a list of phony clean targets for modules
MODULE_CLEANS := $(foreach path,$(dir $(MODULE_MKFILES)),$(WORK_DIR)$(path)/clean)
# rules to clean modules
.PHONY: $(MODULE_CLEANS)
$(MODULE_CLEANS): relpath = $(patsubst $(WORK_DIR)%,%,$@)
$(MODULE_CLEANS): mkfile = $(patsubst %clean,%module.mk,$(relpath))
$(MODULE_CLEANS):
@$(ECHO) %% cleaning using $(mkfile)
$(Q) $(MAKE) -r -f $(PX4_MK_DIR)module.mk \
MODULE_WORK_DIR=$(dir $@) \
MODULE_MK=$(mkfile) \
clean
################################################################################
# Libraries
################################################################################
# where to look for libraries
LIBRARY_SEARCH_DIRS += $(WORK_DIR) $(MODULE_SRC) $(PX4_MODULE_SRC)
# sort and unique the library list
LIBRARIES := $(sort $(LIBRARIES))
# locate the first instance of a library by full path or by looking on the
# library search path
define LIBRARY_SEARCH
$(firstword $(abspath $(wildcard $(1)/library.mk)) \
$(abspath $(foreach search_dir,$(LIBRARY_SEARCH_DIRS),$(wildcard $(search_dir)/$(1)/library.mk))) \
MISSING_$1)
endef
# make a list of library makefiles and check that we found them all
LIBRARY_MKFILES := $(foreach library,$(LIBRARIES),$(call LIBRARY_SEARCH,$(library)))
MISSING_LIBRARIES := $(subst MISSING_,,$(filter MISSING_%,$(LIBRARY_MKFILES)))
ifneq ($(MISSING_LIBRARIES),)
$(error Cant find library(s): $(MISSING_LIBRARIES))
endif
# Make a list of the archive files we expect to build from libraries
# Note that this path will typically contain a double-slash at the WORK_DIR boundary; this must be
# preserved as it is used below to get the absolute path for the library.mk file correct.
#
LIBRARY_LIBS := $(foreach path,$(dir $(LIBRARY_MKFILES)),$(WORK_DIR)$(path)library.a)
# rules to build module objects
.PHONY: $(LIBRARY_LIBS)
$(LIBRARY_LIBS): relpath = $(patsubst $(WORK_DIR)%,%,$@)
$(LIBRARY_LIBS): mkfile = $(patsubst %library.a,%library.mk,$(relpath))
$(LIBRARY_LIBS): workdir = $(@D)
$(LIBRARY_LIBS): $(GLOBAL_DEPS) $(NUTTX_CONFIG_HEADER)
$(Q) $(MKDIR) -p $(workdir)
$(Q) $(MAKE) -r -f $(PX4_MK_DIR)library.mk \
-C $(workdir) \
LIBRARY_WORK_DIR=$(workdir) \
LIBRARY_LIB=$@ \
LIBRARY_MK=$(mkfile) \
LIBRARY_NAME=$(lastword $(subst /, ,$(workdir))) \
library
# make a list of phony clean targets for modules
LIBRARY_CLEANS := $(foreach path,$(dir $(LIBRARY_MKFILES)),$(WORK_DIR)$(path)/clean)
# rules to clean modules
.PHONY: $(LIBRARY_CLEANS)
$(LIBRARY_CLEANS): relpath = $(patsubst $(WORK_DIR)%,%,$@)
$(LIBRARY_CLEANS): mkfile = $(patsubst %clean,%library.mk,$(relpath))
$(LIBRARY_CLEANS):
@$(ECHO) %% cleaning using $(mkfile)
$(Q) $(MAKE) -r -f $(PX4_MK_DIR)library.mk \
LIBRARY_WORK_DIR=$(dir $@) \
LIBRARY_MK=$(mkfile) \
clean
################################################################################
# ROMFS generation
################################################################################
ifeq ($(PX4_TARGET_OS),nuttx)
include $(MK_DIR)/nuttx/nuttx_romfs.mk
endif
################################################################################
# Default SRCS generation
################################################################################
#
# If there are no SRCS, the build will fail; in that case, generate an empty
# source file.
#
ifeq ($(SRCS),)
EMPTY_SRC = $(WORK_DIR)empty.c
$(EMPTY_SRC):
$(Q) $(ECHO) '/* this is an empty file */' > $@
SRCS += $(EMPTY_SRC)
endif
################################################################################
# Build rules
################################################################################
#
# Object files we will generate from sources
#
OBJS := $(foreach src,$(SRCS),$(WORK_DIR)$(src).o)
#
# SRCS -> OBJS rules
#
$(OBJS): $(GLOBAL_DEPS)
$(filter %.c.o,$(OBJS)): $(WORK_DIR)%.c.o: %.c $(GLOBAL_DEPS)
$(call COMPILE,$<,$@)
$(filter %.cpp.o,$(OBJS)): $(WORK_DIR)%.cpp.o: %.cpp $(GLOBAL_DEPS)
$(call COMPILEXX,$<,$@)
$(filter %.S.o,$(OBJS)): $(WORK_DIR)%.S.o: %.S $(GLOBAL_DEPS)
$(call ASSEMBLE,$<,$@)
# Include the OS specific build rules
# The rules must define the "firmware" make target
#
ifeq ($(PX4_TARGET_OS),nuttx)
include $(MK_DIR)/nuttx/nuttx_px4.mk
endif
ifeq ($(PX4_TARGET_OS),posix)
include $(MK_DIR)/posix/posix_elf.mk
endif
ifeq ($(PX4_TARGET_OS),posix-arm)
include $(MK_DIR)/posix/posix_elf.mk
endif
ifeq ($(PX4_TARGET_OS),qurt)
include $(MK_DIR)/qurt/qurt_elf.mk
endif
#
# DEP_INCLUDES is defined by the toolchain include in terms of $(OBJS)
#
-include $(DEP_INCLUDES)