px4-firmware/nuttx/mm/mm_graninit.c

229 lines
8.5 KiB
C

/****************************************************************************
* mm/mm_graninit.c
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdlib.h>
#include <assert.h>
#include <errno.h>
#include <nuttx/gran.h>
#include "mm_gran.h"
#ifdef CONFIG_GRAN
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/****************************************************************************
* Public Data
****************************************************************************/
/* State of the single GRAN allocator */
#ifdef CONFIG_GRAN_SINGLE
FAR struct gran_s *g_graninfo;
#endif
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: gran_common_initialize
*
* Description:
* Perfrom common GRAN initialization.
*
* Input Parameters:
* heapstart - Start of the granule allocation heap
* heapsize - Size of heap in bytes
* log2gran - Log base 2 of the size of one granule. 0->1 byte,
* 1->2 bytes, 2->4 bytes, 3-> 8 bytes, etc.
* log2align - Log base 2 of required alignment. 0->1 byte,
* 1->2 bytes, 2->4 bytes, 3-> 8 bytes, etc. Note that
* log2gran must be greater than or equal to log2align
* so that all contiguous granules in memory will meet
* the minimum alignment requirement. A value of zero
* would mean that no alignment is required.
*
* Returned Value:
* On success, a non-NULL info structure is returned that may be used with
* other granule allocator interfaces.
*
****************************************************************************/
static inline FAR struct gran_s *
gran_common_initialize(FAR void *heapstart, size_t heapsize, uint8_t log2gran,
uint8_t log2align)
{
FAR struct gran_s *priv;
uintptr_t heapend;
uintptr_t alignedstart;
unsigned int mask;
unsigned int alignedsize;
unsigned int ngranules;
/* Check parameters if debug is on. Note the the size of a granual is
* limited to 2**31 bytes and that the size of the granule must be greater
* than the alignment size.
*/
DEBUGASSERT(heapstart && heapsize > 0 &&
log2gran > 0 && log2gran < 32 &&
log2gran > log2align);
/* Get the aligned start of the heap */
mask = (1 << log2align) - 1;
alignedstart = ((uintptr_t)heapstart + mask) & ~mask;
/* Determine the number of granules */
mask = (1 << log2gran) - 1;
heapend = (uintptr_t)heapstart + heapsize;
alignedsize = (heapend - alignedstart) & ~mask;
ngranules = alignedsize >> log2gran;
/* Allocate the information structure with a granule table of the
* correct size.
*/
priv = ( FAR struct gran_s *)zalloc(SIZEOF_GRAN_S(ngranules));
if (priv)
{
/* Initialize non-zero elements of the granules heap info structure */
priv->log2gran = log2gran;
priv->ngranules = ngranules;
priv->heapstart = alignedstart;
/* Initialize mutual exclusion support */
#ifndef CONFIG_GRAN_INTR
sem_init(&priv->exclsem, 0, 1);
#endif
}
return priv;
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: gran_initialize
*
* Description:
* Set up one granule allocator instance. Allocations will be aligned to
* the alignment size (log2align; allocations will be in units of the
* granule size (log2gran). Larger granules will give better performance
* and less overhead but more losses of memory due to quantization waste.
* Additional memory waste can occur from alignment; log2align should be
* set to 0 unless you are using the granule allocator to manage DMA memory
* and your hardware has specific memory alignment requirements.
*
* Geneneral Usage Summary. This is an example using the GCC section
* attribute to position a DMA heap in memory (logic in the linker script
* would assign the section .dmaheap to the DMA memory.
*
* FAR uint32_t g_dmaheap[DMAHEAP_SIZE] __attribute__((section(.dmaheap)));
*
* The heap is created by calling gran_initialize(). Here the granual size
* is set to 64 bytes (2**6) and the alignment to 16 bytes (2**4):
*
* GRAN_HANDLE handle = gran_initialize(g_dmaheap, DMAHEAP_SIZE, 6, 4);
*
* Then the GRAN_HANDLE can be used to allocate memory (There is no
* GRAN_HANDLE if CONFIG_GRAN_SINGLE=y):
*
* FAR uint8_t *dma_memory = (FAR uint8_t *)gran_alloc(handle, 47);
*
* The actual memory allocates will be 64 byte (wasting 17 bytes) and
* will be aligned at least to (1 << log2align).
*
* NOTE: The current implementation also restricts the maximum allocation
* size to 32 granules. That restriction could be eliminated with some
* additional coding effort.
*
* Input Parameters:
* heapstart - Start of the granule allocation heap
* heapsize - Size of heap in bytes
* log2gran - Log base 2 of the size of one granule. 0->1 byte,
* 1->2 bytes, 2->4 bytes, 3-> 8 bytes, etc.
* log2align - Log base 2 of required alignment. 0->1 byte,
* 1->2 bytes, 2->4 bytes, 3-> 8 bytes, etc. Note that
* log2gran must be greater than or equal to log2align
* so that all contiguous granules in memory will meet
* the minimum alignment requirement. A value of zero
* would mean that no alignment is required.
*
* Returned Value:
* On success, a non-NULL handle is returned that may be used with other
* granual allocator interfaces.
*
****************************************************************************/
#ifdef CONFIG_GRAN_SINGLE
int gran_initialize(FAR void *heapstart, size_t heapsize, uint8_t log2gran,
uint8_t log2align)
{
g_graninfo = gran_common_initialize(heapstart, heapsize, log2gran,
log2align);
if (!g_graninfo)
{
return -ENOMEM;
}
return OK;
}
#else
GRAN_HANDLE gran_initialize(FAR void *heapstart, size_t heapsize,
uint8_t log2gran, uint8_t log2align)
{
return (GRAN_HANDLE)gran_common_initialize(heapstart, heapsize,
log2gran, log2align);
}
#endif
#endif /* CONFIG_GRAN */