px4-firmware/nuttx/configs/twr-k60n512/ostest/ld.script

136 lines
4.1 KiB
Plaintext

/****************************************************************************
* configs/twr-k60n512/ostest/ld.script
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The K60N512VMD100 has 512Kb of FLASH beginning at address 0x0000:0000 and
* 128Kb of SRAM beginning at address 0x1800:0000 (SRAM_L) and 0x2000:000
* (SRAM_U).
*
* NOTE: that the first part of the K40 FLASH region is reserved for
* interrupt vectflash and, following that, is a region from 0x0000:0400
* to 0x0000:040f that is reserved for the FLASH control fields (FCF).
*
* NOTE: The on-chip RAM is split evenly among SRAM_L and SRAM_U. The RAM is
* also implemented such that the SRAM_L and SRAM_U ranges form a
* contiguous block in the memory map.
*/
MEMORY
{
vectflash (rx) : ORIGIN = 0x00000000, LENGTH = 1K - 16
cfmprotect (rx) : ORIGIN = 0x00000400, LENGTH = 16
progflash (rx) : ORIGIN = 0x00000800, LENGTH = 512K - 2K
datasram (rwx) : ORIGIN = 0x1fff0000, LENGTH = 128K
}
OUTPUT_ARCH(arm)
ENTRY(_stext)
SECTIONS
{
.vectors : {
_svectors = ABSOLUTE(.);
*(.vectors)
_evectors = ABSOLUTE(.);
} > vectflash
.cfmprotect : {
*(.cfmconfig)
} > cfmprotect
.text : {
_stext = ABSOLUTE(.);
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > progflash
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > datasram AT > progflash
_eronly = LOADADDR(.data);
.ramfunc ALIGN(4): {
_sramfuncs = ABSOLUTE(.);
*(.ramfunc .ramfunc.*)
_eramfuncs = ABSOLUTE(.);
} > datasram AT > progflash
_framfuncs = LOADADDR(.ramfunc);
.ARM.extab : {
*(.ARM.extab*)
} > datasram
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} > datasram
__exidx_end = ABSOLUTE(.);
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
_ebss = ABSOLUTE(.);
} > datasram
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}