px4-firmware/posix-configs/rpi/px4_fw.config

63 lines
1.0 KiB
Bash

#!/bin/sh
# PX4 commands need the 'px4-' prefix in bash.
# (px4-alias.sh is expected to be in the PATH)
. px4-alias.sh
# navio config for FW
param select parameters.bson
param import
param set BAT1_V_DIV 10.177939394
param set BAT1_A_PER_V 15.391030303
param set CBRK_SUPPLY_CHK 894281
param set SYS_AUTOSTART 2100
param set MAV_TYPE 1
# Multi-EKF
param set EKF2_MULTI_IMU 2
param set SENS_IMU_MODE 0
dataman start
load_mon start
mpu9250 -s -R 2 start
lsm9ds1 -s -R 4 start
lsm9ds1_mag -s -R 4 start
ms5611 -X start
navio_rgbled start
board_adc start
battery_status start
gps start -d /dev/spidev0.0 -i spi -p ubx
ms4525do start -X
rc_update start
sensors start
commander start
navigator start
ekf2 start
land_detector start fixedwing
fw_att_control start
fw_pos_control start
mavlink start -x -u 14556 -r 1000000 -p
if [ -c /dev/ttyUSB0 ]
then
mavlink start -x -d /dev/ttyUSB0
elif [ -c /dev/ttyAMA0 ]
then
mavlink start -x -d /dev/ttyAMA0
fi
navio_sysfs_rc_in start
linux_pwm_out start
control_allocator start
logger start -t -b 200
mavlink boot_complete