px4-firmware

dark0707

History

patacongo 1e36879126 Add buildroot support for binutils-2.22 and gcc-4.6.3; all buildroot tools are not called abc-nuttx-elf instead of abc-elf git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5213 42af7a65-404d-4744-a932-0658087f49c3		2012-10-05 23:01:51 +00:00
..
include	Resync new repository with old repo r5166	2012-09-17 18:18:44 +00:00
nsh	Add buildroot support for binutils-2.22 and gcc-4.6.3; all buildroot tools are not called abc-nuttx-elf instead of abc-elf	2012-10-05 23:01:51 +00:00
ostest	Add buildroot support for binutils-2.22 and gcc-4.6.3; all buildroot tools are not called abc-nuttx-elf instead of abc-elf	2012-10-05 23:01:51 +00:00
src	Resync new repository with old repo r5166	2012-09-17 18:18:44 +00:00
Kconfig	Resync new repository with old repo r5166	2012-09-17 18:18:44 +00:00
README.txt	Resync new repository with old repo r5166	2012-09-17 18:18:44 +00:00

README.txt

There's not much here:

EXT1 - P3 0:7 are used for LEDs.

UEXT pin 3/4 -TXD2/RXD2- is UART2.

The board I have has the revision '-' of LPC2378 even though I got the board
more than 2 years after the chip revision was released :-( .
I can't get Nuttx to work if I fully enabled the MAM.

I used FTDI ft232 usb-serial with nsh piping as seen on the screenshot.