px4-firmware/ROMFS/px4fmu_common/init.d/2106_albatross

52 lines
1.1 KiB
Plaintext

#!nsh
#
# @name Applied Aeronautics Albatross
#
# @type Plane A-Tail
#
# @output MAIN1 aileron right
# @output MAIN2 aileron left
# @output MAIN3 v-tail right
# @output MAIN4 v-tail left
# @output MAIN5 throttle
# @output MAIN6 wheel
# @output MAIN7 flaps right
# @output MAIN8 flaps left
#
# @output AUX1 feed-through of RC AUX1 channel
# @output AUX2 feed-through of RC AUX2 channel
# @output AUX3 feed-through of RC AUX3 channel
#
# @maintainer Andreas Antener <andreas@uaventure.com>
#
sh /etc/init.d/rc.fw_defaults
if [ $AUTOCNF == yes ]
then
param set FW_AIRSPD_MIN 10
param set FW_AIRSPD_TRIM 15
param set FW_AIRSPD_MAX 20
param set FW_MAN_P_MAX 55
param set FW_MAN_R_MAX 55
param set FW_R_LIM 55
param set FW_WR_FF 0.2
param set FW_WR_I 0.2
param set FW_WR_IMAX 0.8
param set FW_WR_P 1
param set FW_W_RMAX 0
# set disarmed value for the ESC
param set PWM_DISARMED 1000
fi
set MIXER AAVVTWFF
# use PWM parameters for throttle channel
set PWM_OUT 5
set PWM_DISARMED p:PWM_DISARMED
set PWM_MIN p:PWM_MIN
set PWM_MAX p:PWM_MAX