px4-firmware/test/mavsdk_tests/test_multicopter_failsafe.cpp

168 lines
6.1 KiB
C++

/****************************************************************************
*
* Copyright (c) 2020 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#include "autopilot_tester.h"
TEST_CASE("Land on GPS lost during mission (baro height mode)", "[multicopter]")
{
AutopilotTester tester;
tester.connect(connection_url);
tester.set_height_source(AutopilotTester::HeightSource::Baro);
tester.wait_until_ready();
AutopilotTester::MissionOptions mission_options;
mission_options.rtl_at_end = true;
tester.prepare_square_mission(mission_options);
tester.arm();
tester.execute_mission_and_lose_gps();
std::chrono::seconds until_disarmed_timeout = std::chrono::seconds(300);
tester.wait_until_disarmed(until_disarmed_timeout);
}
TEST_CASE("Land on GPS lost during mission (GPS height mode)", "[multicopter]")
{
AutopilotTester tester;
tester.connect(connection_url);
tester.set_height_source(AutopilotTester::HeightSource::Gps);
tester.wait_until_ready();
AutopilotTester::MissionOptions mission_options;
mission_options.rtl_at_end = true;
tester.prepare_square_mission(mission_options);
tester.arm();
tester.execute_mission_and_lose_gps();
std::chrono::seconds until_disarmed_timeout = std::chrono::seconds(180);
tester.wait_until_disarmed(until_disarmed_timeout);
}
TEST_CASE("Continue on mag lost during mission", "[multicopter]")
{
AutopilotTester tester;
tester.connect(connection_url);
tester.wait_until_ready();
AutopilotTester::MissionOptions mission_options;
mission_options.rtl_at_end = true;
tester.prepare_square_mission(mission_options);
tester.arm();
tester.execute_mission_and_lose_mag();
std::chrono::seconds until_disarmed_timeout = std::chrono::seconds(180);
tester.wait_until_disarmed(until_disarmed_timeout);
}
#if 0
// This test is disabled for now because the estimator sometimes diverges on
// right after landing which then prevents auto-disarm.
TEST_CASE("Continue on mag stuck during mission", "[multicopter][vtol]")
{
AutopilotTester tester;
tester.connect(connection_url);
tester.wait_until_ready();
AutopilotTester::MissionOptions mission_options;
mission_options.rtl_at_end = true;
tester.prepare_square_mission(mission_options);
tester.arm();
tester.execute_mission_and_get_mag_stuck();
std::chrono::seconds until_disarmed_timeout = std::chrono::seconds(180);
tester.wait_until_disarmed(until_disarmed_timeout);
}
#endif
TEST_CASE("Continue on baro lost during mission (baro height mode)", "[multicopter]")
{
AutopilotTester tester;
tester.connect(connection_url);
tester.set_height_source(AutopilotTester::HeightSource::Baro);
tester.wait_until_ready();
AutopilotTester::MissionOptions mission_options;
mission_options.rtl_at_end = true;
tester.prepare_square_mission(mission_options);
tester.arm();
tester.execute_mission_and_lose_baro();
std::chrono::seconds until_disarmed_timeout = std::chrono::seconds(180);
tester.wait_until_disarmed(until_disarmed_timeout);
}
TEST_CASE("Continue on baro lost during mission (GPS height mode)", "[multicopter]")
{
AutopilotTester tester;
tester.connect(connection_url);
tester.set_height_source(AutopilotTester::HeightSource::Gps);
tester.wait_until_ready();
AutopilotTester::MissionOptions mission_options;
mission_options.rtl_at_end = true;
tester.prepare_square_mission(mission_options);
tester.arm();
tester.execute_mission_and_lose_baro();
std::chrono::seconds until_disarmed_timeout = std::chrono::seconds(180);
tester.wait_until_disarmed(until_disarmed_timeout);
}
TEST_CASE("Continue on baro stuck during mission (baro height mode)", "[multicopter]")
{
AutopilotTester tester;
tester.connect(connection_url);
tester.set_height_source(AutopilotTester::HeightSource::Baro);
tester.wait_until_ready();
AutopilotTester::MissionOptions mission_options;
mission_options.rtl_at_end = true;
tester.prepare_square_mission(mission_options);
tester.arm();
tester.execute_mission_and_get_baro_stuck();
std::chrono::seconds until_disarmed_timeout = std::chrono::seconds(180);
tester.wait_until_disarmed(until_disarmed_timeout);
}
TEST_CASE("Continue on baro stuck during mission (GPS height mode)", "[multicopter]")
{
AutopilotTester tester;
tester.connect(connection_url);
tester.set_height_source(AutopilotTester::HeightSource::Gps);
tester.wait_until_ready();
AutopilotTester::MissionOptions mission_options;
mission_options.rtl_at_end = true;
tester.prepare_square_mission(mission_options);
tester.arm();
tester.execute_mission_and_get_baro_stuck();
std::chrono::seconds until_disarmed_timeout = std::chrono::seconds(180);
tester.wait_until_disarmed(until_disarmed_timeout);
}