forked from Archive/PX4-Autopilot
47 lines
1.8 KiB
Plaintext
47 lines
1.8 KiB
Plaintext
uint64 timestamp # time since system start (microseconds)
|
|
uint64 timestamp_sample # the timestamp of the raw data (microseconds)
|
|
|
|
bool valid
|
|
|
|
uint8 SOURCE_UNKNOWN = 0
|
|
uint8 SOURCE_RC = 1 # radio control (input_rc)
|
|
uint8 SOURCE_MAVLINK_0 = 2 # mavlink instance 0
|
|
uint8 SOURCE_MAVLINK_1 = 3 # mavlink instance 1
|
|
uint8 SOURCE_MAVLINK_2 = 4 # mavlink instance 2
|
|
uint8 SOURCE_MAVLINK_3 = 5 # mavlink instance 3
|
|
uint8 SOURCE_MAVLINK_4 = 6 # mavlink instance 4
|
|
uint8 SOURCE_MAVLINK_5 = 7 # mavlink instance 5
|
|
|
|
uint8 data_source
|
|
|
|
# Any of the channels may not be available and be set to NaN
|
|
# to indicate that it does not contain valid data.
|
|
|
|
# Stick positions [-1,1]
|
|
# on a common RC mode 1/2/3/4 remote/joystick the stick deflection: -1 is down/left, 1 is up/right
|
|
# Note: QGC sends throttle/z in range [0,1000] - [0,1]. The MAVLink input conversion [0,1] to [-1,1] is at the moment kept backwards compatible.
|
|
# Positive values are generally used for:
|
|
float32 roll # move right, positive roll rotation, right side down
|
|
float32 pitch # move forward, negative pitch rotation, nose down
|
|
float32 yaw # positive yaw rotation, clockwise when seen top down
|
|
float32 throttle # move up, positive thrust, -1 is minimum available 0% or -100% +1 is 100% thrust
|
|
|
|
float32 flaps # position of flaps switch/knob/lever [-1, 1]
|
|
|
|
float32 aux1
|
|
float32 aux2
|
|
float32 aux3
|
|
float32 aux4
|
|
float32 aux5
|
|
float32 aux6
|
|
|
|
uint16 buttons # A bitfield corresponding to the joystick buttons' 0-15 current state, 1 for pressed, 0 for released. The lowest bit corresponds to button 1 of 16.
|
|
|
|
bool sticks_moving
|
|
|
|
# TOPICS manual_control_setpoint manual_control_input
|
|
# DEPRECATED: float32 x
|
|
# DEPRECATED: float32 y
|
|
# DEPRECATED: float32 z
|
|
# DEPRECATED: float32 r
|