boards: update all NuttX defconfigs

.editorconfig

@@ -1,14 +1,6 @@
 root = true
 
-[*]
-insert_final_newline = false
-
-[{*.{c,cpp,cc,h,hpp},CMakeLists.txt,Kconfig}]
+[*.{c,cpp,cc,h,hpp}]
 indent_style = tab
 tab_width = 8
-# Not in the official standard, but supported by many editors
 max_line_length = 120
-
-[*.yaml]
-indent_style = space
-indent_size = 2

boards/mro/ctrl-zero-classic/nuttx-config/nsh/defconfig

@@ -219,12 +219,12 @@ CONFIG_STM32H7_TIM2=y
 CONFIG_STM32H7_TIM3=y
 CONFIG_STM32H7_TIM4=y
 CONFIG_STM32H7_TIM8=y
-CONFIG_STM32H7_USART1=y
-CONFIG_STM32H7_USART2=y
-CONFIG_STM32H7_USART3=y
 CONFIG_STM32H7_UART4=y
 CONFIG_STM32H7_UART7=y
 CONFIG_STM32H7_UART8=y
+CONFIG_STM32H7_USART1=y
+CONFIG_STM32H7_USART2=y
+CONFIG_STM32H7_USART3=y
 CONFIG_STM32H7_USART_BREAKS=y
 CONFIG_STM32H7_USART_INVERT=y
 CONFIG_STM32H7_USART_SINGLEWIRE=y

src/drivers/px4io/px4io.cpp

@@ -364,13 +364,6 @@ PX4IO::~PX4IO()
 bool PX4IO::updateOutputs(bool stop_motors, uint16_t outputs[MAX_ACTUATORS],
 			  unsigned num_outputs, unsigned num_control_groups_updated)
 {
-	for (size_t i = 0; i < num_outputs; i++) {
-		if (!_mixing_output.isFunctionSet(i)) {
-			// do not run any signal on disabled channels
-			outputs[i] = 0;
-		}
-	}
-
 	if (!_test_fmu_fail) {
 		/* output to the servos */
 		io_reg_set(PX4IO_PAGE_DIRECT_PWM, 0, outputs, num_outputs);

src/lib/mixer_module/mixer_module.cpp

@@ -455,8 +455,7 @@ bool MixingOutput::update()
 		}
 	}
 
-	// Send output if any function mapped or one last disabling sample
-	if (!all_disabled || !_was_all_disabled) {
+	if (!all_disabled) {
 		if (!_armed.armed && !_armed.manual_lockdown) {
 			_actuator_test.overrideValues(outputs, _max_num_outputs);
 		}
@@ -464,8 +463,6 @@ bool MixingOutput::update()
 		limitAndUpdateOutputs(outputs, has_updates);
 	}
 
-	_was_all_disabled = all_disabled;
-
 	return true;
 }
 

src/lib/mixer_module/mixer_module.hpp

@@ -288,7 +288,6 @@ private:
 	hrt_abstime _lowrate_schedule_interval{300_ms};
 	ActuatorTest _actuator_test{_function_assignment};
 	uint32_t _reversible_mask{0}; ///< per-output bits. If set, the output is configured to be reversible (motors only)
-	bool _was_all_disabled{false};
 
 	uORB::SubscriptionCallbackWorkItem *_subscription_callback{nullptr}; ///< current scheduling callback
 

src/lib/mixer_module/mixer_module_tests.cpp

@@ -191,15 +191,11 @@ TEST_F(MixerModuleTest, basic)
 	mixing_output.setAllMaxValues(MAX_VALUE);
 	EXPECT_EQ(test_module.num_updates, 0);
 
-	// all functions disabled: expect to get one single update to process disabling the output signal
+	// all functions disabled: not expected to get an update
 	mixing_output.update();
 	mixing_output.updateSubscriptions(false);
 	mixing_output.update();
-	EXPECT_EQ(test_module.num_updates, 1);
-	mixing_output.update();
-	mixing_output.updateSubscriptions(false);
-	mixing_output.update();
-	EXPECT_EQ(test_module.num_updates, 1);
+	EXPECT_EQ(test_module.num_updates, 0);
 	test_module.reset();
 
 	// configure motor, ensure all still disarmed

src/modules/px4iofirmware/mixer.cpp

@@ -180,19 +180,15 @@ mixer_tick()
 	 * Run the mixers.
 	 */
 	if (source == MIX_FAILSAFE) {
-		// Set failsafe value if the PWM output isn't disabled
+		/* copy failsafe values to the servo outputs */
 		for (unsigned i = 0; i < PX4IO_SERVO_COUNT; i++) {
-			if (r_page_servos[i] != 0) {
-				r_page_servos[i] = r_page_servo_failsafe[i];
-			}
+			r_page_servos[i] = r_page_servo_failsafe[i];
 		}
 
 	} else if (source == MIX_DISARMED) {
-		// Set disarmed value if the PWM output isn't disabled
+		/* copy disarmed values to the servo outputs */
 		for (unsigned i = 0; i < PX4IO_SERVO_COUNT; i++) {
-			if (r_page_servos[i] != 0) {
-				r_page_servos[i] = r_page_servo_disarmed[i];
-			}
+			r_page_servos[i] = r_page_servo_disarmed[i];
 		}
 	}
 

src/modules/zenoh/Kconfig.topics

@@ -85,6 +85,10 @@ menu "Zenoh publishers/subscribers"
 		bool "camera_trigger"
 		default n
 
+	config ZENOH_PUBSUB_CAN_INTERFACE_STATUS
+		bool "can_interface_status"
+		default n
+
 	config ZENOH_PUBSUB_CELLULAR_STATUS
 		bool "cellular_status"
 		default n
@@ -249,6 +253,10 @@ menu "Zenoh publishers/subscribers"
 		bool "geofence_result"
 		default n
 
+	config ZENOH_PUBSUB_GEOFENCE_STATUS
+		bool "geofence_status"
+		default n
+
 	config ZENOH_PUBSUB_GIMBAL_CONTROLS
 		bool "gimbal_controls"
 		default n
@@ -465,6 +473,22 @@ menu "Zenoh publishers/subscribers"
 		bool "orbit_status"
 		default n
 
+	config ZENOH_PUBSUB_PARAMETER_RESET_REQUEST
+		bool "parameter_reset_request"
+		default n
+
+	config ZENOH_PUBSUB_PARAMETER_SET_USED_REQUEST
+		bool "parameter_set_used_request"
+		default n
+
+	config ZENOH_PUBSUB_PARAMETER_SET_VALUE_REQUEST
+		bool "parameter_set_value_request"
+		default n
+
+	config ZENOH_PUBSUB_PARAMETER_SET_VALUE_RESPONSE
+		bool "parameter_set_value_response"
+		default n
+
 	config ZENOH_PUBSUB_PARAMETER_UPDATE
 		bool "parameter_update"
 		default n
@@ -545,6 +569,10 @@ menu "Zenoh publishers/subscribers"
 		bool "rpm"
 		default n
 
+	config ZENOH_PUBSUB_RTL_STATUS
+		bool "rtl_status"
+		default n
+
 	config ZENOH_PUBSUB_RTL_TIME_ESTIMATE
 		bool "rtl_time_estimate"
 		default n
@@ -851,6 +879,7 @@ config ZENOH_PUBSUB_ALL_SELECTION
 	select ZENOH_PUBSUB_CAMERA_CAPTURE
 	select ZENOH_PUBSUB_CAMERA_STATUS
 	select ZENOH_PUBSUB_CAMERA_TRIGGER
+	select ZENOH_PUBSUB_CAN_INTERFACE_STATUS
 	select ZENOH_PUBSUB_CELLULAR_STATUS
 	select ZENOH_PUBSUB_COLLISION_CONSTRAINTS
 	select ZENOH_PUBSUB_COLLISION_REPORT
@@ -892,6 +921,7 @@ config ZENOH_PUBSUB_ALL_SELECTION
 	select ZENOH_PUBSUB_FOLLOW_TARGET_STATUS
 	select ZENOH_PUBSUB_GENERATOR_STATUS
 	select ZENOH_PUBSUB_GEOFENCE_RESULT
+	select ZENOH_PUBSUB_GEOFENCE_STATUS
 	select ZENOH_PUBSUB_GIMBAL_CONTROLS
 	select ZENOH_PUBSUB_GIMBAL_DEVICE_ATTITUDE_STATUS
 	select ZENOH_PUBSUB_GIMBAL_DEVICE_INFORMATION
@@ -946,6 +976,10 @@ config ZENOH_PUBSUB_ALL_SELECTION
 	select ZENOH_PUBSUB_ORB_TEST_LARGE
 	select ZENOH_PUBSUB_ORB_TEST_MEDIUM
 	select ZENOH_PUBSUB_ORBIT_STATUS
+	select ZENOH_PUBSUB_PARAMETER_RESET_REQUEST
+	select ZENOH_PUBSUB_PARAMETER_SET_USED_REQUEST
+	select ZENOH_PUBSUB_PARAMETER_SET_VALUE_REQUEST
+	select ZENOH_PUBSUB_PARAMETER_SET_VALUE_RESPONSE
 	select ZENOH_PUBSUB_PARAMETER_UPDATE
 	select ZENOH_PUBSUB_PING
 	select ZENOH_PUBSUB_POSITION_CONTROLLER_LANDING_STATUS
@@ -966,6 +1000,7 @@ config ZENOH_PUBSUB_ALL_SELECTION
 	select ZENOH_PUBSUB_REGISTER_EXT_COMPONENT_REPLY
 	select ZENOH_PUBSUB_REGISTER_EXT_COMPONENT_REQUEST
 	select ZENOH_PUBSUB_RPM
+	select ZENOH_PUBSUB_RTL_STATUS
 	select ZENOH_PUBSUB_RTL_TIME_ESTIMATE
 	select ZENOH_PUBSUB_SATELLITE_INFO
 	select ZENOH_PUBSUB_SENSOR_ACCEL