[AUTO COMMIT] update change indication

ekf2: Compute stapdown INS propagation using closed-form solution
2023-11-01 10:19:39 +00:00 · 2023-10-31 18:42:22 +01:00
1391 changed files with 33900 additions and 56490 deletions
--- a/.ackrc
+++ b/.ackrc
@ -0,0 +1 @@
+--ignore-dir=Documentation
--- a/.ci/Jenkinsfile-compile
+++ b/.ci/Jenkinsfile-compile
@ -40,16 +40,16 @@ pipeline {
                     "ark_can-flow_default",
                     "ark_can-gps_canbootloader",
                     "ark_can-gps_default",
-                     "ark_can-rtk-gps_canbootloader",
-                     "ark_can-rtk-gps_default",
                     "ark_cannode_canbootloader",
                     "ark_cannode_default",
+                     "ark_can-rtk-gps_canbootloader",
+                     "ark_can-rtk-gps_default",
                     "ark_fmu-v6x_bootloader",
                     "ark_fmu-v6x_default",
                     "atl_mantis-edu_default",
                     "av_x-v1_default",
-                     "bitcraze_crazyflie21_default",
                     "bitcraze_crazyflie_default",
+                     "bitcraze_crazyflie21_default",
                     "cuav_can-gps-v1_canbootloader",
                     "cuav_can-gps-v1_default",
                     "cuav_nora_default",
@ -66,8 +66,8 @@ pipeline {
                     "holybro_durandal-v1_default",
                     "holybro_kakutef7_default",
                     "holybro_kakuteh7_default",
-                     "holybro_kakuteh7mini_default",
                     "holybro_kakuteh7v2_default",
+                     "holybro_kakuteh7mini_default",
                     "holybro_pix32v5_default",
                     "matek_gnss-m9n-f4_canbootloader",
                     "matek_gnss-m9n-f4_default",
@ -77,8 +77,8 @@ pipeline {
                     "modalai_fc-v1_default",
                     "modalai_fc-v2_default",
                     "mro_ctrl-zero-classic_default",
-                     "mro_ctrl-zero-f7-oem_default",
                     "mro_ctrl-zero-f7_default",
+                     "mro_ctrl-zero-f7-oem_default",
                     "mro_ctrl-zero-h7-oem_default",
                     "mro_ctrl-zero-h7_default",
                     "mro_pixracerpro_default",
@ -88,6 +88,7 @@ pipeline {
                     "nxp_fmuk66-e_socketcan",
                     "nxp_fmuk66-v3_default",
                     "nxp_fmuk66-v3_socketcan",
+                     "nxp_fmurt1062-v1_default",
                     "nxp_mr-canhubk3_default",
                     "nxp_ucans32k146_canbootloader",
                     "nxp_ucans32k146_default",
@ -104,28 +105,20 @@ pipeline {
                     "px4_fmu-v5_debug",
                     "px4_fmu-v5_default",
                     "px4_fmu-v5_lto",
-                     "px4_fmu-v5_rover",
                     "px4_fmu-v5_stackcheck",
                     "px4_fmu-v5_uavcanv0periph",
                     "px4_fmu-v5x_default",
-                     "px4_fmu-v5x_rover",
                     "px4_fmu-v6c_default",
-                     "px4_fmu-v6c_rover",
                     "px4_fmu-v6u_default",
-                     "px4_fmu-v6u_rover",
                     "px4_fmu-v6x_default",
-                     "px4_fmu-v6x_rover",
-                     "px4_fmu-v6xrt_bootloader",
-                     "px4_fmu-v6xrt_default",
-                     "px4_fmu-v6xrt_rover",
                     "px4_io-v2_default",
                     "raspberrypi_pico_default",
-                     "siyi_n7_default",
                     "sky-drones_smartap-airlink_default",
                     "spracing_h7extreme_default",
                     "thepeach_k1_default",
                     "thepeach_r1_default",
                     "uvify_core_default",
+                     "siyi_n7_default"
            ],
            image: docker_images.nuttx,
            archive: true
--- a/.editorconfig
+++ b/.editorconfig
@ -1,14 +0,0 @@
-root = true
-
-[*]
-insert_final_newline = false
-
-[{*.{c,cpp,cc,h,hpp},CMakeLists.txt,Kconfig}]
-indent_style = tab
-tab_width = 8
-# Not in the official standard, but supported by many editors
-max_line_length = 120
-
-[*.yaml]
-indent_style = space
-indent_size = 2
--- a/.github/workflows/compile_macos.yml
+++ b/.github/workflows/compile_macos.yml
@ -18,11 +18,6 @@ jobs:
          px4_sitl
          ]
    steps:
-    - name: install Python 3.10
-      uses: actions/setup-python@v4
-      with:
-        python-version: "3.10"
-
    - uses: actions/checkout@v1
      with:
        token: ${{secrets.ACCESS_TOKEN}}
--- a/.github/workflows/compile_nuttx.yml
+++ b/.github/workflows/compile_nuttx.yml
@ -25,7 +25,6 @@ jobs:
          ark_can-rtk-gps,
          ark_cannode,
          ark_fmu-v6x,
-          ark_septentrio-gps,
          atl_mantis-edu,
          av_x-v1,
          bitcraze_crazyflie,
@ -49,7 +48,6 @@ jobs:
          matek_h743-slim,
          modalai_fc-v1,
          modalai_fc-v2,
-          mro_ctrl-zero-classic,
          mro_ctrl-zero-f7,
          mro_ctrl-zero-f7-oem,
          mro_ctrl-zero-h7,
@ -59,6 +57,7 @@ jobs:
          mro_x21-777,
          nxp_fmuk66-e,
          nxp_fmuk66-v3,
+          nxp_fmurt1062-v1,
          nxp_mr-canhubk3,
          nxp_ucans32k146,
          omnibus_f4sd,
@ -71,7 +70,6 @@ jobs:
          px4_fmu-v6c,
          px4_fmu-v6u,
          px4_fmu-v6x,
-          px4_fmu-v6xrt,
          raspberrypi_pico,
          sky-drones_smartap-airlink,
          spracing_h7extreme,
--- a/.github/workflows/metadata.yml
+++ b/.github/workflows/metadata.yml
@ -128,6 +128,4 @@ jobs:
      run: |
        git clone https://github.com/PX4/px4_msgs.git
        rm px4_msgs/msg/*.msg
-        rm px4_msgs/srv/*.srv
        cp msg/*.msg px4_msgs/msg/
-        cp srv/*.srv px4_msgs/srv/
--- a/.github/workflows/nuttx_env_config.yml
+++ b/.github/workflows/nuttx_env_config.yml
@ -1,32 +0,0 @@
-name: Nuttx Target with extra env config
-
-on:
-  push:
-    branches:
-    - 'main'
-  pull_request:
-    branches:
-    - '*'
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    container: px4io/px4-dev-nuttx-focal:2022-08-12
-    strategy:
-      matrix:
-        config: [
-          px4_fmu-v5,
-          ]
-    steps:
-    - uses: actions/checkout@v1
-      with:
-        token: ${{secrets.ACCESS_TOKEN}}
-
-    - name: make ${{matrix.config}}
-      env:
-        PX4_EXTRA_NUTTX_CONFIG: "CONFIG_NSH_LOGIN_PASSWORD=\"test\";CONFIG_NSH_CONSOLE_LOGIN=y"
-      run: |
-        echo "PX4_EXTRA_NUTTX_CONFIG: $PX4_EXTRA_NUTTX_CONFIG"
-        make ${{matrix.config}} nuttx_context
-        # Check that the config option is set
-        grep CONFIG_NSH_LOGIN_PASSWORD build/${{matrix.config}}_default/NuttX/nuttx/.config
--- a/.github_changelog_generator
+++ b/.github_changelog_generator
@ -0,0 +1,33 @@
+# How to install:
+#   gem install github_changelog_generator
+# How to run:
+#   github_changelog_generator -u PX4 -p Firmware
+# Description:
+#   The following params are sensible defaults for the PX4 project,
+#   if you want to do a changelog before a release you need to update since-tag and future-releases,
+
+# Params:
+#   github_changelog_generator --help for all options
+
+# max-issues
+#   max threshold for github api queries
+#   make sure you set your CHANGELOG_GITHUB_TOKEN before
+#   running
+max-issues=1500
+
+# exclude-tags-regex
+#   excludes release candidates
+exclude-tags-regex=rc[0-9]{1,}|beta[0-9]{1,}
+
+# since-tag
+#   version of last stable release
+#   you need to change this depending on what you need
+#   if you want a changelog between versions this is the lowest version
+since-tag=1.6.5
+
+# future-release
+#   version you are about to release
+#   if you want a changelog between a version and all unreleased changes grouped as a release
+#     eg: v1.6.5 to v1.7.0
+future-release=v1.7.0
+
--- a/.gitmodules
+++ b/.gitmodules
@ -72,14 +72,3 @@
 	path = src/modules/zenoh/zenoh-pico
 	url = https://github.com/px4/zenoh-pico
 	branch = pr-zubf-werror-fix
-[submodule "src/lib/heatshrink/heatshrink"]
-	path = src/lib/heatshrink/heatshrink
-	url = https://github.com/PX4/heatshrink.git
-	branch = px4
-[submodule "Tools/simulation/gz"]
-	path = Tools/simulation/gz
-	url = https://github.com/PX4/PX4-gazebo-models.git
-	branch = main
-[submodule "boards/modalai/voxl2/libfc-sensor-api"]
-	path = boards/modalai/voxl2/libfc-sensor-api
-	url = https://gitlab.com/voxl-public/voxl-sdk/core-libs/libfc-sensor-api.git
--- a/.travis.yml
+++ b/.travis.yml
@ -0,0 +1,35 @@
+language: cpp
+
+git:
+  depth: 100
+  submodules: false
+
+matrix:
+  fast_finish: true
+  include:
+    - os: linux
+      dist: xenial
+      # In order to stay under the coverity rate limit, we only run this weekly
+      # and not on push which is configured in travis-ci settings.
+      if: branch = main
+
+before_install:
+    - echo -n | openssl s_client -connect scan.coverity.com:443 | sed -ne '/-BEGIN CERTIFICATE-/,/-END CERTIFICATE-/p' | sudo tee -a /etc/ssl/certs/ca-
+
+install:
+    - export PATH=$HOME/.local/bin:$PATH
+    - pip install --user --upgrade pip
+    - pip install --user -r Tools/setup/requirements.txt
+
+script:
+    - make
+
+addons:
+  coverity_scan:
+    project:
+      name: "PX4/Firmware"
+      description: "Build submitted via Travis CI"
+    notification_email: ci@px4.io
+    build_command_prepend: "make distclean"
+    build_command: "make px4_sitl_default"
+    branch_pattern: coverity_scan
--- a/.vscode/cmake-variants.yaml
+++ b/.vscode/cmake-variants.yaml
@ -71,26 +71,6 @@ CONFIG:
      buildType: MinSizeRel
      settings:
        CONFIG: px4_fmu-v5x_default
-    px4_fmu-v6c_default:
-      short: px4_fmu-v6c
-      buildType: MinSizeRel
-      settings:
-        CONFIG: px4_fmu-v6c_default
-    px4_fmu-v6c_bootloader:
-      short: px4_fmu-v6c_bootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: px4_fmu-v6c_bootloader
-    px4_fmu-v6u_default:
-      short: px4_fmu-v6u
-      buildType: MinSizeRel
-      settings:
-        CONFIG: px4_fmu-v6u_default
-    px4_fmu-v6u_bootloader:
-      short: px4_fmu-v6u_bootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: px4_fmu-v6u_bootloader
    px4_fmu-v6x_default:
      short: px4_fmu-v6x
      buildType: MinSizeRel
@ -101,16 +81,6 @@ CONFIG:
      buildType: MinSizeRel
      settings:
        CONFIG: px4_fmu-v6x_bootloader
-    px4_fmu-v6xrt_default:
-      short: px4_fmu-v6xrt
-      buildType: MinSizeRel
-      settings:
-        CONFIG: px4_fmu-v6xrt_default
-    px4_fmu-v6xrt_bootloader:
-      short: px4_fmu-v6xrt_bootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: px4_fmu-v6xrt_bootloader
    airmind_mindpx-v2_default:
      short: airmind_mindpx-v2
      buildType: MinSizeRel
@ -151,16 +121,6 @@ CONFIG:
      buildType: MinSizeRel
      settings:
        CONFIG: ark_can-rtk-gps_canbootloader
-    ark_septentrio_gps_default:
-      short: ark_septentrio_gps_default
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_septentrio_gps_default
-    ark_septentrio_gps_canbootloader:
-      short: ark_septentrio_gps_canbootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_septentrio_gps_canbootloader
    ark_cannode_default:
      short: ark_cannode_default
      buildType: MinSizeRel
@ -221,11 +181,6 @@ CONFIG:
      buildType: MinSizeRel
      settings:
        CONFIG: cubepilot_cubeorange_test
-    cubepilot_cubeorangeplus_test:
-      short: cubepilot_cubeorangeplus
-      buildType: MinSizeRel
-      settings:
-        CONFIG: cubepilot_cubeorangeplus_test
    emlid_navio2_default:
      short: emlid_navio2
      buildType: MinSizeRel
--- a/.ycm_extra_conf.py
+++ b/.ycm_extra_conf.py
@ -0,0 +1,172 @@
+# This file is NOT licensed under the GPLv3, which is the license for the rest
+# of YouCompleteMe.
+#
+# Here's the license text for this file:
+#
+# This is free and unencumbered software released into the public domain.
+#
+# Anyone is free to copy, modify, publish, use, compile, sell, or
+# distribute this software, either in source code form or as a compiled
+# binary, for any purpose, commercial or non-commercial, and by any
+# means.
+#
+# In jurisdictions that recognize copyright laws, the author or authors
+# of this software dedicate any and all copyright interest in the
+# software to the public domain. We make this dedication for the benefit
+# of the public at large and to the detriment of our heirs and
+# successors. We intend this dedication to be an overt act of
+# relinquishment in perpetuity of all present and future rights to this
+# software under copyright law.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+# EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+# IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+# OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+# ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+# OTHER DEALINGS IN THE SOFTWARE.
+#
+# For more information, please refer to <http://unlicense.org/>
+
+import os
+import ycm_core
+
+# These are the compilation flags that will be used in case there's no
+# compilation database set (by default, one is not set).
+# CHANGE THIS LIST OF FLAGS. YES, THIS IS THE DROID YOU HAVE BEEN LOOKING FOR.
+flags = [
+'-Wall',
+'-Wextra',
+'-Werror',
+#'-Wc++98-compat',
+'-Wno-long-long',
+'-Wno-variadic-macros',
+'-fexceptions',
+'-DNDEBUG',
+# You 100% do NOT need -DUSE_CLANG_COMPLETER in your flags; only the YCM
+# source code needs it.
+#'-DUSE_CLANG_COMPLETER',
+# THIS IS IMPORTANT! Without a "-std=<something>" flag, clang won't know which
+# language to use when compiling headers. So it will guess. Badly. So C++
+# headers will be compiled as C headers. You don't want that so ALWAYS specify
+# a "-std=<something>".
+# For a C project, you would set this to something like 'c99' instead of
+# 'c++14'.
+'-std=c++14',
+# ...and the same thing goes for the magic -x option which specifies the
+# language that the files to be compiled are written in. This is mostly
+# relevant for c++ headers.
+# For a C project, you would set this to 'c' instead of 'c++'.
+'-x',
+'c++',
+'-undef', # get rid of standard definitions to allow us to include arm math header
+'-I', os.path.join(os.path.expanduser("~"),'gcc-arm-none-eabi-4_7-2013q3/arm-none-eabi/include'),
+'-I', 'Build/px4_io-v2_default.build/nuttx-export/include/',
+'-I', './NuttX/nuttx/arch/arm/include',
+'-include', './src/include/visibility.h',
+'-I', './src',
+'-I', './src/modules',
+'-I', './src/include',
+'-I', './src/lib',
+'-I', './NuttX',
+]
+
+
+# Set this to the absolute path to the folder (NOT the file!) containing the
+# compile_commands.json file to use that instead of 'flags'. See here for
+# more details: http://clang.llvm.org/docs/JSONCompilationDatabase.html
+#
+# Most projects will NOT need to set this to anything; you can just change the
+# 'flags' list of compilation flags. Notice that YCM itself uses that approach.
+compilation_database_folder = ''
+
+if os.path.exists( compilation_database_folder ):
+  database = ycm_core.CompilationDatabase( compilation_database_folder )
+else:
+  database = None
+
+SOURCE_EXTENSIONS = [ '.cpp', '.cxx', '.cc', '.c', '.m', '.mm' ]
+
+def DirectoryOfThisScript():
+  return os.path.dirname( os.path.abspath( __file__ ) )
+
+
+def MakeRelativePathsInFlagsAbsolute( flags, working_directory ):
+  if not working_directory:
+    return list( flags )
+  new_flags = []
+  make_next_absolute = False
+  path_flags = [ '-isystem', '-I', '-iquote', '--sysroot=' ]
+  for flag in flags:
+    new_flag = flag
+
+    if make_next_absolute:
+      make_next_absolute = False
+      if not flag.startswith( '/' ):
+        new_flag = os.path.join( working_directory, flag )
+
+    for path_flag in path_flags:
+      if flag == path_flag:
+        make_next_absolute = True
+        break
+
+      if flag.startswith( path_flag ):
+        path = flag[ len( path_flag ): ]
+        new_flag = path_flag + os.path.join( working_directory, path )
+        break
+
+    if new_flag:
+      new_flags.append( new_flag )
+  return new_flags
+
+
+def IsHeaderFile( filename ):
+  extension = os.path.splitext( filename )[ 1 ]
+  return extension in [ '.h', '.hxx', '.hpp', '.hh' ]
+
+
+def GetCompilationInfoForFile( filename ):
+  # The compilation_commands.json file generated by CMake does not have entries
+  # for header files. So we do our best by asking the db for flags for a
+  # corresponding source file, if any. If one exists, the flags for that file
+  # should be good enough.
+  if IsHeaderFile( filename ):
+    basename = os.path.splitext( filename )[ 0 ]
+    for extension in SOURCE_EXTENSIONS:
+      replacement_file = basename + extension
+      if os.path.exists( replacement_file ):
+        compilation_info = database.GetCompilationInfoForFile(
+          replacement_file )
+        if compilation_info.compiler_flags_:
+          return compilation_info
+    return None
+  return database.GetCompilationInfoForFile( filename )
+
+
+def FlagsForFile( filename, **kwargs ):
+  if database:
+    # Bear in mind that compilation_info.compiler_flags_ does NOT return a
+    # python list, but a "list-like" StringVec object
+    compilation_info = GetCompilationInfoForFile( filename )
+    if not compilation_info:
+      return None
+
+    final_flags = MakeRelativePathsInFlagsAbsolute(
+      compilation_info.compiler_flags_,
+      compilation_info.compiler_working_dir_ )
+
+    # NOTE: This is just for YouCompleteMe; it's highly likely that your project
+    # does NOT need to remove the stdlib flag. DO NOT USE THIS IN YOUR
+    # ycm_extra_conf IF YOU'RE NOT 100% SURE YOU NEED IT.
+    #try:
+    #  final_flags.remove( '-stdlib=libc++' )
+    #except ValueError:
+    #  pass
+  else:
+    relative_to = DirectoryOfThisScript()
+    final_flags = MakeRelativePathsInFlagsAbsolute( flags, relative_to )
+
+  return {
+    'flags': final_flags,
+    'do_cache': True
+  }
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@ -148,7 +148,6 @@ define_property(GLOBAL PROPERTY PX4_MODULE_PATHS
                 BRIEF_DOCS "PX4 module paths"
                 FULL_DOCS "List of paths to all PX4 modules"
                 )
-
 define_property(GLOBAL PROPERTY PX4_SRC_FILES
                 BRIEF_DOCS "src files from all PX4 modules & libs"
                 FULL_DOCS "SRC files from px4_add_{module,library}"
--- a/Firmware.sublime-project
+++ b/Firmware.sublime-project
@ -0,0 +1,83 @@
+{
+	"folders":
+	[
+		{
+			"path": ".",
+			"file_exclude_patterns":
+			[
+				"*.o",
+				"*.a",
+				"*.d",
+				".built",
+				".context",
+				".depend",
+				".config",
+				".version",
+				"Make.dep",
+				".configured",
+				"*.sublime-project",
+				"*.sublime-workspace",
+				".project",
+				".cproject",
+				"cscope.out"
+			],
+			"folder_exclude_patterns":
+			[
+				".settings",
+				"nuttx/arch/arm/src/board",
+				"nuttx/arch/arm/src/chip",
+				"build_*"
+			]
+		}
+	],
+	"settings":
+	{
+		"tab_size": 8,
+		"translate_tabs_to_spaces": false,
+		"highlight_line": true,
+		"AStyleFormatter":
+		{
+			"options_c":
+			{
+				"use_only_additional_options": true,
+				"additional_options_file": "${project_path}/Tools/astyle/astylerc"
+			},
+			"options_c++":
+			{
+				"use_only_additional_options": true,
+				"additional_options_file": "${project_path}/Tools/astyle/astylerc"
+			}
+		}
+	},
+	"build_systems":
+	[
+		{
+			"name": "PX4: make all",
+			"working_dir": "${project_path}",
+			"file_regex": "^(..[^:]*):([0-9]+):?([0-9]+)?:? (.*)$",
+			"cmd": ["make"],
+			"shell": true
+		},
+		{
+			"name": "PX4: make and upload",
+			"working_dir": "${project_path}",
+			"file_regex": "^(..[^:]*):([0-9]+):?([0-9]+)?:? (.*)$",
+			"cmd": ["make upload px4_fmu-v2_default -j8"],
+			"shell": true
+		},
+		{
+			"name": "PX4: make posix",
+			"working_dir": "${project_path}",
+			"file_regex": "^(..[^:]*):([0-9]+):?([0-9]+)?:? (.*)$",
+			"cmd": ["make posix"],
+			"shell": true
+		},
+		{
+			"name": "MindPX_V2: make and upload",
+			"working_dir": "${project_path}",
+			"file_regex": "^(..[^:]*):([0-9]+):?([0-9]+)?:? (.*)$",
+			"cmd": ["make upload mindpx-v2_default -j8"],
+			"shell": true
+		}
+	]
+}
--- a/3
+++ b/3
@ -105,7 +105,6 @@ pipeline {
            ./emsdk activate latest;
            cd ..;
            . ./_emscripten_sdk/emsdk_env.sh;
-            git fetch --all --tags;
            make failsafe_web;
            cd build/px4_sitl_default_failsafe_web;
            mkdir -p failsafe_sim;
@ -231,9 +230,7 @@ pipeline {
              sh("git clone https://${GIT_USER}:${GIT_PASS}@github.com/PX4/px4_msgs.git")
              // 'main' branch
              sh('rm -f px4_msgs/msg/*.msg')
-              sh('rm -f px4_msgs/srv/*.srv')
              sh('cp msg/*.msg px4_msgs/msg/')
-              sh('cp srv/*.srv px4_msgs/srv/')
              sh('cd px4_msgs; git status; git add .; git commit -a -m "Update message definitions `date`" || true')
              sh('cd px4_msgs; git push origin main || true')
              sh('rm -rf px4_msgs')
--- a/3
+++ b/3
@ -266,6 +266,7 @@ px4fmu_firmware: \

 misc_qgc_extra_firmware: \
 	check_nxp_fmuk66-v3_default \
+	check_nxp_fmurt1062-v1_default \
 	check_mro_x21_default \
 	check_bitcraze_crazyflie_default \
 	check_bitcraze_crazyflie21_default \
@ -483,9 +484,7 @@ validate_module_configs:
 	@find "$(SRC_DIR)"/src/modules "$(SRC_DIR)"/src/drivers "$(SRC_DIR)"/src/lib -name *.yaml -type f \
 	-not -path "$(SRC_DIR)/src/lib/mixer_module/*" \
 	-not -path "$(SRC_DIR)/src/modules/uxrce_dds_client/dds_topics.yaml" \
-	-not -path "$(SRC_DIR)/src/modules/zenoh/zenoh-pico/*" \
 	-not -path "$(SRC_DIR)/src/lib/events/libevents/*" \
-	-not -path "$(SRC_DIR)/src/lib/cdrstream/*" \
 	-not -path "$(SRC_DIR)/src/lib/crypto/libtommath/*" -print0 | \
 	xargs -0 "$(SRC_DIR)"/Tools/validate_yaml.py --schema-file "$(SRC_DIR)"/validation/module_schema.yaml

--- a/ROMFS/px4fmu_common/init.d-posix/airframes/10040_sihsim_quadx
+++ b/ROMFS/px4fmu_common/init.d-posix/airframes/10040_sihsim_quadx
@ -22,17 +22,18 @@ param set-default CBRK_SUPPLY_CHK 894281
 # - without safety switch
 param set-default CBRK_IO_SAFETY 22027

-# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
 param set-default CA_ROTOR3_KM -0.05

 param set-default PWM_MAIN_FUNC1 101
--- a/ROMFS/px4fmu_common/init.d-posix/airframes/10041_sihsim_airplane
+++ b/ROMFS/px4fmu_common/init.d-posix/airframes/10041_sihsim_airplane
@ -26,7 +26,7 @@ param set-default CBRK_IO_SAFETY 22027

 param set-default BAT_N_CELLS 3

-param set-default SIH_T_MAX 6
+param set-default SIH_T_MAX 6.0
 param set-default SIH_MASS 0.3
 param set-default SIH_IXX 0.00402
 param set-default SIH_IYY 0.0144
@ -45,9 +45,9 @@ param set-default CA_ROTOR_COUNT 1
 param set-default CA_SV_CS_COUNT 3
 param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_P 1
+param set-default CA_SV_CS1_TRQ_P 1.0
 param set-default CA_SV_CS1_TYPE 3
-param set-default CA_SV_CS2_TRQ_Y 1
+param set-default CA_SV_CS2_TRQ_Y 1.0
 param set-default CA_SV_CS2_TYPE 4
 param set-default PWM_MAIN_FUNC3 201
 param set-default PWM_MAIN_FUNC4 202
--- a/ROMFS/px4fmu_common/init.d-posix/airframes/10042_sihsim_xvert
+++ b/ROMFS/px4fmu_common/init.d-posix/airframes/10042_sihsim_xvert
@ -35,14 +35,14 @@ param set-default CBRK_IO_SAFETY 22027

 param set-default BAT_N_CELLS 3

-param set-default SIH_T_MAX 2
+param set-default SIH_T_MAX 2.0
 param set-default SIH_Q_MAX 0.0165
 param set-default SIH_MASS 0.2
 # IXX and IZZ are inverted from the thesis as the body frame is pitched by 90 deg
 param set-default SIH_IXX 0.00354
 param set-default SIH_IYY 0.000625
 param set-default SIH_IZZ 0.00300
-param set-default SIH_IXZ 0
+param set-default SIH_IXZ 0.0
 param set-default SIH_KDV 0.2
 param set-default SIH_L_ROLL 0.145

--- a/ROMFS/px4fmu_common/init.d-posix/airframes/1010_gazebo-classic_iris_opt_flow
+++ b/ROMFS/px4fmu_common/init.d-posix/airframes/1010_gazebo-classic_iris_opt_flow
@ -47,5 +47,5 @@ param set-default MPC_ALT_MODE 2

 param set-default SENS_FLOW_ROT 6
 param set-default SENS_FLOW_MINHGT 0.7
-param set-default SENS_FLOW_MAXHGT 3
+param set-default SENS_FLOW_MAXHGT 3.0
 param set-default SENS_FLOW_MAXR 2.5
--- a/ROMFS/px4fmu_common/init.d-posix/airframes/1021_gazebo-classic_uuv_hippocampus
+++ b/ROMFS/px4fmu_common/init.d-posix/airframes/1021_gazebo-classic_uuv_hippocampus
@ -8,34 +8,34 @@
 param set-default CA_AIRFRAME 7
 param set-default CA_ROTOR_COUNT 4
 param set-default CA_R_REV 255
-param set-default CA_ROTOR0_AX 1
-param set-default CA_ROTOR0_AY 0
-param set-default CA_ROTOR0_AZ 0
-param set-default CA_ROTOR0_KM 0
-param set-default CA_ROTOR0_PX 0
-param set-default CA_ROTOR0_PY -0.3
-param set-default CA_ROTOR0_PZ -0.3
-param set-default CA_ROTOR1_AX 1
-param set-default CA_ROTOR1_AY 0
-param set-default CA_ROTOR1_AZ 0
-param set-default CA_ROTOR1_KM 0
-param set-default CA_ROTOR1_PX 0
-param set-default CA_ROTOR1_PY 0.3
-param set-default CA_ROTOR1_PZ -0.3
-param set-default CA_ROTOR2_AX 1
-param set-default CA_ROTOR2_AY 0
-param set-default CA_ROTOR2_AZ 0
-param set-default CA_ROTOR2_KM 0
-param set-default CA_ROTOR2_PX 0
-param set-default CA_ROTOR2_PY 0.3
-param set-default CA_ROTOR2_PZ 0.3
-param set-default CA_ROTOR3_AX 1
-param set-default CA_ROTOR3_AY 0
-param set-default CA_ROTOR3_AZ 0
-param set-default CA_ROTOR3_KM 0
-param set-default CA_ROTOR3_PX 0
-param set-default CA_ROTOR3_PY -0.3
-param set-default CA_ROTOR3_PZ 0.3
+param set-default CA_ROTOR0_AX 1.0000
+param set-default CA_ROTOR0_AY 0.0000
+param set-default CA_ROTOR0_AZ 0.0000
+param set-default CA_ROTOR0_KM 0.0000
+param set-default CA_ROTOR0_PX 0.0000
+param set-default CA_ROTOR0_PY -0.3000
+param set-default CA_ROTOR0_PZ -0.3000
+param set-default CA_ROTOR1_AX 1.0000
+param set-default CA_ROTOR1_AY 0.0000
+param set-default CA_ROTOR1_AZ 0.0000
+param set-default CA_ROTOR1_KM 0.0000
+param set-default CA_ROTOR1_PX 0.0000
+param set-default CA_ROTOR1_PY 0.3000
+param set-default CA_ROTOR1_PZ -0.3000
+param set-default CA_ROTOR2_AX 1.0000
+param set-default CA_ROTOR2_AY 0.0000
+param set-default CA_ROTOR2_AZ 0.0000
+param set-default CA_ROTOR2_KM 0.0000
+param set-default CA_ROTOR2_PX 0.0000
+param set-default CA_ROTOR2_PY 0.3000
+param set-default CA_ROTOR2_PZ 0.3000
+param set-default CA_ROTOR3_AX 1.0000
+param set-default CA_ROTOR3_AY 0.0000
+param set-default CA_ROTOR3_AZ 0.0000
+param set-default CA_ROTOR3_KM 0.0000
+param set-default CA_ROTOR3_PX 0.0000
+param set-default CA_ROTOR3_PY -0.3000
+param set-default CA_ROTOR3_PZ 0.3000

 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
--- a/ROMFS/px4fmu_common/init.d-posix/airframes/1022_gazebo-classic_uuv_bluerov2_heavy
+++ b/ROMFS/px4fmu_common/init.d-posix/airframes/1022_gazebo-classic_uuv_bluerov2_heavy
@ -9,49 +9,49 @@ param set-default CA_AIRFRAME 7

 param set-default CA_ROTOR_COUNT 8
 param set-default CA_R_REV 255
-param set-default CA_ROTOR0_AX 1
-param set-default CA_ROTOR0_AY -1
-param set-default CA_ROTOR0_AZ 0
-param set-default CA_ROTOR0_KM 0
-param set-default CA_ROTOR0_PX 0.5
-param set-default CA_ROTOR0_PY 0.3
-param set-default CA_ROTOR0_PZ 0.2
-param set-default CA_ROTOR1_AX 1
-param set-default CA_ROTOR1_AY 1
-param set-default CA_ROTOR1_AZ 0
-param set-default CA_ROTOR1_KM 0
-param set-default CA_ROTOR1_PX 0.5
-param set-default CA_ROTOR1_PY -0.3
-param set-default CA_ROTOR1_PZ 0.2
-param set-default CA_ROTOR2_AX 1
-param set-default CA_ROTOR2_AY 1
-param set-default CA_ROTOR2_AZ 0
-param set-default CA_ROTOR2_KM 0
-param set-default CA_ROTOR2_PX -0.5
-param set-default CA_ROTOR2_PY 0.3
-param set-default CA_ROTOR2_PZ 0.2
-param set-default CA_ROTOR3_AX 1
-param set-default CA_ROTOR3_AY -1
-param set-default CA_ROTOR3_AZ 0
-param set-default CA_ROTOR3_KM 0
-param set-default CA_ROTOR3_PX -0.5
-param set-default CA_ROTOR3_PY -0.3
-param set-default CA_ROTOR3_PZ 0.2
-param set-default CA_ROTOR4_AZ -1
-param set-default CA_ROTOR4_KM 0
-param set-default CA_ROTOR4_PX 0.5
-param set-default CA_ROTOR4_PY 0.5
-param set-default CA_ROTOR5_AZ 1
-param set-default CA_ROTOR5_KM 0
-param set-default CA_ROTOR5_PX 0.5
-param set-default CA_ROTOR5_PY -0.5
-param set-default CA_ROTOR6_AZ 1
-param set-default CA_ROTOR6_KM 0
-param set-default CA_ROTOR6_PX -0.5
-param set-default CA_ROTOR6_PY 0.5
-param set-default CA_ROTOR7_KM 0
-param set-default CA_ROTOR7_PX -0.5
-param set-default CA_ROTOR7_PY -0.5
+param set-default CA_ROTOR0_AX 1.0000
+param set-default CA_ROTOR0_AY -1.0000
+param set-default CA_ROTOR0_AZ 0.0000
+param set-default CA_ROTOR0_KM 0.0000
+param set-default CA_ROTOR0_PX 0.5000
+param set-default CA_ROTOR0_PY 0.3000
+param set-default CA_ROTOR0_PZ 0.2000
+param set-default CA_ROTOR1_AX 1.0000
+param set-default CA_ROTOR1_AY 1.0000
+param set-default CA_ROTOR1_AZ 0.0000
+param set-default CA_ROTOR1_KM 0.0000
+param set-default CA_ROTOR1_PX 0.5000
+param set-default CA_ROTOR1_PY -0.3000
+param set-default CA_ROTOR1_PZ 0.2000
+param set-default CA_ROTOR2_AX 1.0000
+param set-default CA_ROTOR2_AY 1.0000
+param set-default CA_ROTOR2_AZ 0.0000
+param set-default CA_ROTOR2_KM 0.0000
+param set-default CA_ROTOR2_PX -0.5000
+param set-default CA_ROTOR2_PY 0.3000
+param set-default CA_ROTOR2_PZ 0.2000
+param set-default CA_ROTOR3_AX 1.0000
+param set-default CA_ROTOR3_AY -1.0000
+param set-default CA_ROTOR3_AZ 0.0000
+param set-default CA_ROTOR3_KM 0.0000
+param set-default CA_ROTOR3_PX -0.5000
+param set-default CA_ROTOR3_PY -0.3000
+param set-default CA_ROTOR3_PZ 0.2000
+param set-default CA_ROTOR4_AZ -1.0000
+param set-default CA_ROTOR4_KM 0.0000
+param set-default CA_ROTOR4_PX 0.5000
+param set-default CA_ROTOR4_PY 0.5000
+param set-default CA_ROTOR5_AZ 1.0000
+param set-default CA_ROTOR5_KM 0.0000
+param set-default CA_ROTOR5_PX 0.5000
+param set-default CA_ROTOR5_PY -0.5000
+param set-default CA_ROTOR6_AZ 1.0000
+param set-default CA_ROTOR6_KM 0.0000
+param set-default CA_ROTOR6_PX -0.5000
+param set-default CA_ROTOR6_PY 0.5000
+param set-default CA_ROTOR7_KM 0.0000
+param set-default CA_ROTOR7_PX -0.5000
+param set-default CA_ROTOR7_PY -0.5000

 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
--- a/ROMFS/px4fmu_common/init.d-posix/airframes/1030_gazebo-classic_plane
+++ b/ROMFS/px4fmu_common/init.d-posix/airframes/1030_gazebo-classic_plane
@ -54,9 +54,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
+param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10
--- a/ROMFS/px4fmu_common/init.d-posix/airframes/1031_gazebo-classic_plane_cam
+++ b/ROMFS/px4fmu_common/init.d-posix/airframes/1031_gazebo-classic_plane_cam
@ -57,9 +57,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
+param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10
--- a/ROMFS/px4fmu_common/init.d-posix/airframes/1032_gazebo-classic_plane_catapult
+++ b/ROMFS/px4fmu_common/init.d-posix/airframes/1032_gazebo-classic_plane_catapult
@ -57,9 +57,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
+param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10
--- a/ROMFS/px4fmu_common/init.d-posix/airframes/1033_jsbsim_rascal
+++ b/ROMFS/px4fmu_common/init.d-posix/airframes/1033_jsbsim_rascal
@ -42,9 +42,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
+param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10
--- a/ROMFS/px4fmu_common/init.d-posix/airframes/1034_flightgear_rascal-electric
+++ b/ROMFS/px4fmu_common/init.d-posix/airframes/1034_flightgear_rascal-electric
@ -42,9 +42,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
+param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10
--- a/ROMFS/px4fmu_common/init.d-posix/airframes/1035_gazebo-classic_techpod
+++ b/ROMFS/px4fmu_common/init.d-posix/airframes/1035_gazebo-classic_techpod
@ -40,9 +40,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
+param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10
--- a/ROMFS/px4fmu_common/init.d-posix/airframes/1036_jsbsim_malolo
+++ b/ROMFS/px4fmu_common/init.d-posix/airframes/1036_jsbsim_malolo
@ -42,9 +42,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
+param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10
--- a/ROMFS/px4fmu_common/init.d-posix/airframes/1037_gazebo-classic_believer
+++ b/ROMFS/px4fmu_common/init.d-posix/airframes/1037_gazebo-classic_believer
@ -48,9 +48,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
+param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10
--- a/ROMFS/px4fmu_common/init.d-posix/airframes/1038_gazebo-classic_glider
+++ b/ROMFS/px4fmu_common/init.d-posix/airframes/1038_gazebo-classic_glider
@ -55,9 +55,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
+param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10
--- a/ROMFS/px4fmu_common/init.d-posix/airframes/1039_flightgear_rascal
+++ b/ROMFS/px4fmu_common/init.d-posix/airframes/1039_flightgear_rascal
@ -47,9 +47,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
+param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10
--- a/ROMFS/px4fmu_common/init.d-posix/airframes/1039_gazebo-classic_advanced_plane
+++ b/ROMFS/px4fmu_common/init.d-posix/airframes/1039_gazebo-classic_advanced_plane
@ -45,9 +45,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
+param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10
--- a/ROMFS/px4fmu_common/init.d-posix/airframes/1040_gazebo-classic_standard_vtol
+++ b/ROMFS/px4fmu_common/init.d-posix/airframes/1040_gazebo-classic_standard_vtol
@ -27,8 +27,8 @@ param set-default CA_ROTOR2_KM -0.05
 param set-default CA_ROTOR3_PX -0.1515
 param set-default CA_ROTOR3_PY 0.1875
 param set-default CA_ROTOR3_KM -0.05
-param set-default CA_ROTOR4_AX 1
-param set-default CA_ROTOR4_AZ 0
+param set-default CA_ROTOR4_AX 1.0
+param set-default CA_ROTOR4_AZ 0.0
 param set-default CA_ROTOR4_PX 0.2

 param set-default CA_SV_CS_COUNT 3
@ -37,7 +37,7 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS1_TYPE 2
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
 param set-default PWM_MAIN_FUNC3 103
@ -47,8 +47,6 @@ param set-default PWM_MAIN_FUNC6 201
 param set-default PWM_MAIN_FUNC7 202
 param set-default PWM_MAIN_FUNC8 203

-param set-default FW_AIRSPD_MAX 25
-param set-default FW_THR_ASPD_MAX 0.4
 param set-default NPFG_PERIOD 12
 param set-default FW_PR_FF 0.2
 param set-default FW_PR_P 0.9
@ -64,18 +62,19 @@ param set-default FW_T_SINK_MAX 2.7
 param set-default FW_T_SINK_MIN 2.2

 param set-default MC_AIRMODE 1
-param set-default MC_ROLL_P 4
 param set-default MC_ROLLRATE_P 0.3
 param set-default MC_YAW_P 1.6
-param set-default MC_YAWRATE_P 0.3
-

 param set-default MIS_TAKEOFF_ALT 10

+param set-default MPC_XY_P 0.8
+param set-default MPC_XY_VEL_P_ACC 3
+param set-default MPC_XY_VEL_I_ACC 4
+param set-default MPC_XY_VEL_D_ACC 0.1
+
 param set-default NAV_ACC_RAD 5

 param set-default VT_FWD_THRUST_EN 4
-param set-default VT_FWD_THRUST_SC 1
 param set-default VT_F_TRANS_THR 0.75
 param set-default VT_TYPE 2

--- a/ROMFS/px4fmu_common/init.d-posix/airframes/1041_gazebo-classic_tailsitter
+++ b/ROMFS/px4fmu_common/init.d-posix/airframes/1041_gazebo-classic_tailsitter
@ -50,11 +50,11 @@ param set-default SENS_IMU_MODE 1

 param set-default FW_P_TC 0.6

-param set-default FW_PR_FF 0.0
+param set-default FW_PR_FF 0.1
 param set-default FW_PSP_OFF 2
 param set-default FW_RR_FF 0.1
 param set-default FW_RR_I 0.2
-param set-default FW_RR_P 0.5
+param set-default FW_RR_P 0.3
 param set-default FW_THR_TRIM 0.35
 param set-default FW_THR_MAX 0.8
 param set-default FW_THR_MIN 0.05
@ -66,6 +66,8 @@ param set-default FW_T_SINK_MIN 1.6
 param set-default MC_AIRMODE 1
 param set-default MC_ROLL_P 3
 param set-default MC_PITCH_P 3
+param set-default MC_ROLLRATE_P 0.3
+param set-default MC_PITCHRATE_P 0.3

 param set-default VT_ARSP_TRANS 10
 param set-default VT_B_TRANS_DUR 5
--- a/ROMFS/px4fmu_common/init.d-posix/airframes/1042_gazebo-classic_tiltrotor
+++ b/ROMFS/px4fmu_common/init.d-posix/airframes/1042_gazebo-classic_tiltrotor
@ -31,7 +31,7 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
 param set-default CA_SV_CS_COUNT 3
 param set-default CA_SV_TL_COUNT 2
--- a/ROMFS/px4fmu_common/init.d-posix/airframes/1043_gazebo-classic_standard_vtol_drop
+++ b/ROMFS/px4fmu_common/init.d-posix/airframes/1043_gazebo-classic_standard_vtol_drop
@ -27,8 +27,8 @@ param set-default CA_ROTOR2_KM -0.05
 param set-default CA_ROTOR3_PX -0.1515
 param set-default CA_ROTOR3_PY 0.1875
 param set-default CA_ROTOR3_KM -0.05
-param set-default CA_ROTOR4_AX 1
-param set-default CA_ROTOR4_AZ 0
+param set-default CA_ROTOR4_AX 1.0
+param set-default CA_ROTOR4_AZ 0.0
 param set-default CA_ROTOR4_PX 0.2

 param set-default CA_SV_CS_COUNT 3
@ -37,7 +37,7 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS1_TYPE 2
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
 param set-default PWM_MAIN_FUNC3 103
--- a/ROMFS/px4fmu_common/init.d-posix/airframes/1044_gazebo-classic_plane_lidar
+++ b/ROMFS/px4fmu_common/init.d-posix/airframes/1044_gazebo-classic_plane_lidar
@ -57,9 +57,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
+param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10
--- a/ROMFS/px4fmu_common/init.d-posix/airframes/1060_gazebo-classic_rover
+++ b/ROMFS/px4fmu_common/init.d-posix/airframes/1060_gazebo-classic_rover
@ -22,7 +22,7 @@ param set-default NAV_ACC_RAD 0.5
 param set-default NAV_LOITER_RAD 2

 param set-default GND_MAX_ANG 0.6
-param set-default GND_WHEEL_BASE 2
+param set-default GND_WHEEL_BASE 2.0

 param set-default CA_AIRFRAME 5

--- a/ROMFS/px4fmu_common/init.d-posix/airframes/1061_gazebo-classic_r1_rover
+++ b/ROMFS/px4fmu_common/init.d-posix/airframes/1061_gazebo-classic_r1_rover
@ -4,9 +4,31 @@
 # @type Rover
 # @class Rover

-. ${R}etc/init.d/rc.rover_differential_defaults
+. ${R}etc/init.d/rc.rover_defaults

+param set-default GND_L1_DIST 5
+param set-default GND_SP_CTRL_MODE 1
+param set-default GND_SPEED_D 3
+param set-default GND_SPEED_I 0.001
+param set-default GND_SPEED_IMAX 0.125
+param set-default GND_SPEED_P 0.25
+param set-default GND_SPEED_THR_SC 1
+param set-default GND_SPEED_TRIM 4
+param set-default GND_THR_CRUISE 0.3
+param set-default GND_THR_MAX 0.5
+param set-default GND_THR_MIN 0
+
+param set-default NAV_ACC_RAD 0.5
+param set-default NAV_LOITER_RAD 2
+
+param set-default GND_MAX_ANG 0.6
+param set-default GND_WHEEL_BASE 2.0
+
+param set-default CA_AIRFRAME 6
+
+param set-default CA_R_REV 3
 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 101
 param set-default PWM_MAIN_FUNC6 102
 param set-default PWM_MAIN_FUNC7 102
+
--- a/ROMFS/px4fmu_common/init.d-posix/airframes/1062_flightgear_tf-r1
+++ b/ROMFS/px4fmu_common/init.d-posix/airframes/1062_flightgear_tf-r1
@ -29,7 +29,7 @@ param set-default NAV_ACC_RAD 0.5
 param set-default NAV_LOITER_RAD 2

 param set-default GND_MAX_ANG 0.6
-param set-default GND_WHEEL_BASE 3
+param set-default GND_WHEEL_BASE 3.0

 param set-default CA_AIRFRAME 5

--- a/ROMFS/px4fmu_common/init.d-posix/airframes/1070_gazebo-classic_boat
+++ b/ROMFS/px4fmu_common/init.d-posix/airframes/1070_gazebo-classic_boat
@ -22,7 +22,7 @@ param set-default NAV_ACC_RAD 0.5
 param set-default NAV_LOITER_RAD 2

 param set-default GND_MAX_ANG 0.6
-param set-default GND_WHEEL_BASE 2
+param set-default GND_WHEEL_BASE 2.0

 param set-default CA_AIRFRAME 9

--- a/ROMFS/px4fmu_common/init.d-posix/airframes/17001_flightgear_tf-g1
+++ b/ROMFS/px4fmu_common/init.d-posix/airframes/17001_flightgear_tf-g1
@ -14,7 +14,7 @@

 param set-default FW_AIRSPD_STALL 8

-param set-default FW_P_RMAX_NEG 20
+param set-default FW_P_RMAX_NEG 20.0
 param set-default FW_W_RMAX 10
 param set-default FW_W_EN 1

@ -37,7 +37,7 @@ param set-default FW_P_LIM_MAX 25
 param set-default FW_P_LIM_MIN -5
 param set-default FW_R_LIM 30

-param set-default FW_MAN_R_MAX 30
+param set-default FW_MAN_R_MAX 30.0

 param set-default FW_THR_TRIM 0.8
 param set-default FW_THR_IDLE 0
--- a/ROMFS/px4fmu_common/init.d-posix/airframes/17002_flightgear_tf-g2
+++ b/ROMFS/px4fmu_common/init.d-posix/airframes/17002_flightgear_tf-g2
@ -14,7 +14,7 @@

 param set-default FW_AIRSPD_STALL 5

-param set-default FW_P_RMAX_NEG 20
+param set-default FW_P_RMAX_NEG 20.0
 param set-default FW_W_RMAX 10
 param set-default FW_W_EN 1

@ -29,9 +29,9 @@ param set-default NAV_LOITER_RAD 50
 # Parameters related to autogyro takeoff PR
 #param set-default AG_TKOFF 1
 #param set-default AG_PROT_TYPE 1
-#param set-default AG_PROT_MIN_RPM 50
-#param set-default AG_PROT_TRG_RPM 900
-#param set-defoult AG_ROTOR_RPM 900
+#param set-default AG_PROT_MIN_RPM 50.0
+#param set-default AG_PROT_TRG_RPM 900.0
+#param set-defoult AG_ROTOR_RPM 900.0

 param set-default FW_ARSP_SCALE_EN 0

@ -42,7 +42,7 @@ param set-default FW_P_LIM_MAX 25
 param set-default FW_P_LIM_MIN -5
 param set-default FW_R_LIM 30

-param set-default FW_MAN_R_MAX 30
+param set-default FW_MAN_R_MAX 30.0

 param set-default FW_THR_CRUISE 0.8
 param set-default FW_THR_IDLE 0
--- a/ROMFS/px4fmu_common/init.d-posix/airframes/2507_gazebo-classic_cloudship
+++ b/ROMFS/px4fmu_common/init.d-posix/airframes/2507_gazebo-classic_cloudship
@ -14,21 +14,21 @@
 param set-default CA_AIRFRAME 9

 param set-default CA_ROTOR_COUNT 3
-param set-default CA_ROTOR0_AX 1
-param set-default CA_ROTOR0_AZ 0
-param set-default CA_ROTOR0_KM 0
-param set-default CA_ROTOR0_PY 2
-param set-default CA_ROTOR1_AX 1
-param set-default CA_ROTOR1_AZ 0
-param set-default CA_ROTOR1_KM 0
-param set-default CA_ROTOR1_PY -2
-param set-default CA_ROTOR2_AY -1
-param set-default CA_ROTOR2_AZ 0
-param set-default CA_ROTOR2_KM 0
-param set-default CA_ROTOR2_PX -10
+param set-default CA_ROTOR0_AX 1.0000
+param set-default CA_ROTOR0_AZ 0.0000
+param set-default CA_ROTOR0_KM 0.0000
+param set-default CA_ROTOR0_PY 2.0000
+param set-default CA_ROTOR1_AX 1.0000
+param set-default CA_ROTOR1_AZ 0.0000
+param set-default CA_ROTOR1_KM 0.0000
+param set-default CA_ROTOR1_PY -2.0000
+param set-default CA_ROTOR2_AY -1.0000
+param set-default CA_ROTOR2_AZ 0.0000
+param set-default CA_ROTOR2_KM 0.0000
+param set-default CA_ROTOR2_PX -10.0000

 param set-default CA_SV_CS_COUNT 1
-param set-default CA_SV_CS0_TRQ_P 1
+param set-default CA_SV_CS0_TRQ_P 1.0000

 param set-default CA_R_REV 7

--- a/ROMFS/px4fmu_common/init.d-posix/airframes/3011_jsbsim_hexarotor_x
+++ b/ROMFS/px4fmu_common/init.d-posix/airframes/3011_jsbsim_hexarotor_x
@ -13,9 +13,9 @@ param set-default MAV_TYPE 13

 param set-default MC_PITCHRATE_P 0.1
 param set-default MC_PITCHRATE_I 0.05
-param set-default MC_PITCH_P 6
+param set-default MC_PITCH_P 6.0
 param set-default MC_ROLLRATE_I 0.1
-param set-default MC_ROLL_P 6
+param set-default MC_ROLL_P 6.0
 param set-default MPC_XY_VEL_I_ACC 4
 param set-default MPC_XY_VEL_P_ACC 3

@ -27,11 +27,11 @@ param set-default MNT_MODE_IN 4
 param set-default MNT_DO_STAB 2


-param set-default CA_ROTOR0_PX 0
-param set-default CA_ROTOR0_PY 1
+param set-default CA_ROTOR0_PX 0.0
+param set-default CA_ROTOR0_PY 1.0
 param set-default CA_ROTOR0_KM -0.05
-param set-default CA_ROTOR1_PX 0
-param set-default CA_ROTOR1_PY -1
+param set-default CA_ROTOR1_PX 0.0
+param set-default CA_ROTOR1_PY -1.0
 param set-default CA_ROTOR1_KM 0.05
 param set-default CA_ROTOR2_PX 0.866025
 param set-default CA_ROTOR2_PY -0.5
--- a/ROMFS/px4fmu_common/init.d-posix/airframes/4003_gz_rc_cessna
+++ b/ROMFS/px4fmu_common/init.d-posix/airframes/4003_gz_rc_cessna
@ -70,9 +70,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
+param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10
--- a/ROMFS/px4fmu_common/init.d-posix/airframes/4004_gz_standard_vtol
+++ b/ROMFS/px4fmu_common/init.d-posix/airframes/4004_gz_standard_vtol
@ -40,8 +40,8 @@ param set-default CA_ROTOR2_KM -0.05
 param set-default CA_ROTOR3_PX -0.1515
 param set-default CA_ROTOR3_PY 0.1875
 param set-default CA_ROTOR3_KM -0.05
-param set-default CA_ROTOR4_AX 1
-param set-default CA_ROTOR4_AZ 0
+param set-default CA_ROTOR4_AX 1.0
+param set-default CA_ROTOR4_AZ 0.0
 param set-default CA_ROTOR4_PX 0.2

 param set-default SIM_GZ_EC_FUNC1 101
@ -66,6 +66,7 @@ param set-default SIM_GZ_SV_FUNC2 202
 param set-default SIM_GZ_SV_FUNC3 203

 param set-default COM_RC_IN_MODE 1
+param set-default ASPD_PRIMARY 1

 param set-default CA_SV_CS_COUNT 3
 param set-default CA_SV_CS0_TYPE 1
@ -73,9 +74,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS1_TYPE 2
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0

-param set-default NPFG_PERIOD 12
+param set-default FW_L1_PERIOD 12
 param set-default FW_PR_FF 0.2
 param set-default FW_PR_P 0.9
 param set-default FW_PSP_OFF 2
--- a/ROMFS/px4fmu_common/init.d-posix/airframes/4006_gz_px4vision
+++ b/ROMFS/px4fmu_common/init.d-posix/airframes/4006_gz_px4vision
@ -52,8 +52,12 @@ param set-default MAV_1_MODE 9
 # param set-default SER_TEL1_BAUD 921600	Not found

 # Vehicle attitude PID tuning
+param set-default MC_ACRO_EXPO 0
+param set-default MC_ACRO_EXPO_Y 0
 param set-default MC_ACRO_P_MAX 200
 param set-default MC_ACRO_R_MAX 200
+param set-default MC_ACRO_SUPEXPO 0
+param set-default MC_ACRO_SUPEXPOY 0
 param set-default MC_ACRO_Y_MAX 150
 param set-default MC_PITCHRATE_D 0.0015
 param set-default MC_ROLLRATE_D 0.0015
@ -105,19 +109,31 @@ param set-default CBRK_IO_SAFETY 22027

 param set-default THR_MDL_FAC 0.3

-# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
 param set-default CA_ROTOR3_KM -0.05

+# Outputs
+# param set-default PWM_AUX_FUNC1 101
+# param set-default PWM_AUX_FUNC2 102
+# param set-default PWM_AUX_FUNC3 103
+# param set-default PWM_AUX_FUNC4 104
+
+# param set-default PWM_MAIN_FUNC1 101
+# param set-default PWM_MAIN_FUNC2 102
+# param set-default PWM_MAIN_FUNC3 103
+# param set-default PWM_MAIN_FUNC4 104
+
 param set-default SIM_GZ_EC_FUNC1 101
 param set-default SIM_GZ_EC_FUNC2 102
 param set-default SIM_GZ_EC_FUNC3 103
@ -132,3 +148,5 @@ param set-default SIM_GZ_EC_MAX1 1100
 param set-default SIM_GZ_EC_MAX2 1100
 param set-default SIM_GZ_EC_MAX3 1100
 param set-default SIM_GZ_EC_MAX4 1100
+
+
--- a/ROMFS/px4fmu_common/init.d-posix/airframes/4008_gz_advanced_plane
+++ b/ROMFS/px4fmu_common/init.d-posix/airframes/4008_gz_advanced_plane
@ -1,82 +0,0 @@
-#!/bin/sh
-#
-# @name Advanced Plane SITL
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-PX4_SIMULATOR=${PX4_SIMULATOR:=gz}
-PX4_GZ_WORLD=${PX4_GZ_WORLD:=default}
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=advanced_plane}
-
-param set-default SIM_GZ_EN 1
-
-param set-default SENS_EN_GPSSIM 1
-param set-default SENS_EN_MAGSIM 1
-param set-default SENS_EN_ARSPDSIM 1
-
-param set-default FW_LND_ANG 8
-param set-default NPFG_PERIOD 12
-
-param set-default FW_MAN_P_MAX 30
-param set-default FW_PR_P 0.9
-param set-default FW_PR_FF 0.5
-param set-default FW_PR_I 0.5
-
-param set-default FW_PSP_OFF 2
-param set-default FW_P_LIM_MAX 32
-param set-default FW_P_LIM_MIN -15
-
-param set-default FW_RR_FF 0.5
-param set-default FW_RR_P 0.3
-param set-default FW_RR_I 0.5
-
-param set-default FW_YR_FF 0.5
-param set-default FW_YR_P 0.6
-param set-default FW_YR_I 0.5
-
-param set-default FW_SPOILERS_LND 0.4
-
-param set-default FW_THR_MIN 0.05
-param set-default FW_THR_TRIM 0.25
-
-param set-default FW_T_CLMB_MAX 8
-param set-default FW_T_SINK_MAX 2.7
-param set-default FW_T_SINK_MIN 2.2
-
-param set-default FW_W_EN 1
-
-param set-default MIS_TAKEOFF_ALT 30
-
-param set-default NAV_ACC_RAD 15
-param set-default NAV_DLL_ACT 2
-
-param set-default RWTO_TKOFF 1
-
-param set-default CA_AIRFRAME 1
-
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-
-param set-default CA_SV_CS_COUNT 6
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
-param set-default CA_SV_CS3_TYPE 4
-param set-default CA_SV_CS4_TYPE 9
-param set-default CA_SV_CS5_TYPE 10
-
-param set-default SIM_GZ_EC_FUNC1 101
-param set-default SIM_GZ_EC_MIN1 10
-param set-default SIM_GZ_EC_MAX1 1600
-
-param set-default SIM_GZ_SV_FUNC1 201
-param set-default SIM_GZ_SV_FUNC2 202
-param set-default SIM_GZ_SV_FUNC3 203
-param set-default SIM_GZ_SV_FUNC4 204
-param set-default SIM_GZ_SV_FUNC5 205
-param set-default SIM_GZ_SV_FUNC6 206
--- a/ROMFS/px4fmu_common/init.d-posix/airframes/4009_gz_r1_rover
+++ b/ROMFS/px4fmu_common/init.d-posix/airframes/4009_gz_r1_rover
@ -1,31 +0,0 @@
-#!/bin/sh
-# @name Aion Robotics R1 Rover
-# @type Rover
-# @class Rover
-
-. ${R}etc/init.d/rc.rover_differential_defaults
-
-PX4_SIMULATOR=${PX4_SIMULATOR:=gz}
-PX4_GZ_WORLD=${PX4_GZ_WORLD:=default}
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=r1_rover}
-
-param set-default SIM_GZ_EN 1 # Gazebo bridge
-
-# Simulated sensors
-param set-default SENS_EN_GPSSIM 1
-param set-default SENS_EN_BAROSIM 0
-param set-default SENS_EN_MAGSIM 1
-param set-default SENS_EN_ARSPDSIM 1
-
-# Actuator mapping
-param set-default SIM_GZ_WH_FUNC1 101 # right wheel
-param set-default SIM_GZ_WH_MIN1 0
-param set-default SIM_GZ_WH_MAX1 200
-param set-default SIM_GZ_WH_DIS1 100
-
-param set-default SIM_GZ_WH_FUNC2 102 # left wheel
-param set-default SIM_GZ_WH_MIN2 0
-param set-default SIM_GZ_WH_MAX2 200
-param set-default SIM_GZ_WH_DIS2 100
-
-param set-default SIM_GZ_WH_REV 1 # reverse right wheel
--- a/ROMFS/px4fmu_common/init.d-posix/airframes/4010_gz_x500_mono_cam
+++ b/ROMFS/px4fmu_common/init.d-posix/airframes/4010_gz_x500_mono_cam
@ -1,10 +0,0 @@
-#!/bin/sh
-#
-# @name Gazebo x500 mono cam
-#
-# @type Quadrotor
-#
-
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=x500_mono_cam}
-
-. ${R}etc/init.d-posix/airframes/4001_gz_x500
--- a/ROMFS/px4fmu_common/init.d-posix/airframes/4011_gz_lawnmower
+++ b/ROMFS/px4fmu_common/init.d-posix/airframes/4011_gz_lawnmower
@ -1,80 +0,0 @@
-#!/bin/sh
-# @name Gazebo lawnmower
-# @type Rover
-# @class Rover
-
-. ${R}etc/init.d/rc.rover_differential_defaults
-
-PX4_SIMULATOR=${PX4_SIMULATOR:=gz}
-PX4_GZ_WORLD=${PX4_GZ_WORLD:=default}
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=lawnmower}
-
-param set-default SIM_GZ_EN 1 # Gazebo bridge
-
-# Simulated sensors
-param set-default SENS_EN_GPSSIM 1
-param set-default SENS_EN_BAROSIM 0
-param set-default SENS_EN_MAGSIM 1
-param set-default SENS_EN_ARSPDSIM 1
-# We can arm and drive in manual mode when it slides and GPS check fails:
-param set-default COM_ARM_WO_GPS 1
-
-# Set Differential Drive Kinematics Library parameters:
-param set RDD_WHEEL_BASE 0.9
-param set RDD_WHEEL_RADIUS 0.22
-param set RDD_WHEEL_SPEED 10.0	# Maximum wheel speed rad/s, approx 8 km/h
-
-# Actuator mapping - set SITL motors/servos output parameters:
-
-# "Motors" - motor channels 0 (Right) and 1 (Left) - via Wheels GZ bridge:
-param set-default SIM_GZ_WH_FUNC1 101 # right wheel
-#param set-default SIM_GZ_WH_MIN1 0
-#param set-default SIM_GZ_WH_MAX1 200
-#param set-default SIM_GZ_WH_DIS1 100
-#param set-default SIM_GZ_WH_FAIL1 100
-
-param set-default SIM_GZ_WH_FUNC2 102 # left wheel
-#param set-default SIM_GZ_WH_MIN2 0
-#param set-default SIM_GZ_WH_MAX2 200
-#aram set-default SIM_GZ_WH_DIS2 100
-#param set-default SIM_GZ_WH_FAIL2 100
-
-param set-default SIM_GZ_WH_REV 0 # no need to reverse any wheels
-
-# Note: The servo configurations ( SIM_GZ_SV_FUNC*) outlined below are intended for educational purposes in this simulation. 
-# They do not have physical effects in the simulated environment, except for actuating the joints. Their definitions are meant to demonstrate 
-# how actuators could be mapped and configured in a real-world application, providing a foundation for understanding and implementing actuator 
-# controls in practical scenarios.
-
-# Cutter deck blades clutch, PCA9685 servo channel 3,  "RC FLAPS" (406) - leftmost switch, or "Servo 3" (203):
-param set-default SIM_GZ_SV_FUNC3 203
-param set-default SIM_GZ_SV_MIN3 0
-param set-default SIM_GZ_SV_MAX3 1000
-param set-default SIM_GZ_SV_DIS3 500
-param set-default SIM_GZ_SV_FAIL3 500
-
-# Gas engine throttle, PCA9685 servo channel 4, "RC AUX1" (407) - left knob, or "Servo 4" (204):
-#    - on minimum when disarmed or failed:
-param set-default SIM_GZ_SV_FUNC4 204
-param set-default SIM_GZ_SV_MIN4 0
-param set-default SIM_GZ_SV_MAX4 1000
-param set-default SIM_GZ_SV_DIS4 500
-param set-default SIM_GZ_SV_FAIL4 500
-
-# Controlling PCA9685 servos 5,6,7,8 directly via "Servo 5..8" setting, by publishing actuator_servos.control[]:
-
-# Strobes, PCA9685 servo channel 5, "Servo 5" (205) - flashing indicates Mission mode:
-#param set-default SIM_GZ_SV_FUNC5 205
-#param set-default SIM_GZ_SV_MIN5 1000
-#param set-default SIM_GZ_SV_MAX5 2000
-#param set-default SIM_GZ_SV_DIS5 1000
-#param set-default SIM_GZ_SV_FAIL5 1000
-
-# Horn, PCA9685 servo channel 6, "Servo 6" (206) - for alarms like GPS failure:
-#param set-default SIM_GZ_SV_FUNC6 206
-
-# Spare PCA9685 servo channel 7 on "RC AUX2" (408) - right knob, or "Servo 7" (207):
-#param set-default SIM_GZ_SV_FUNC7 207
-
-# Spare PCA9685 servo channel 8 - "Servo 8" (208):
-#param set-default SIM_GZ_SV_FUNC8 208
--- a/ROMFS/px4fmu_common/init.d-posix/airframes/6011_gazebo-classic_typhoon_h480
+++ b/ROMFS/px4fmu_common/init.d-posix/airframes/6011_gazebo-classic_typhoon_h480
@ -9,14 +9,14 @@

 param set-default MAV_TYPE 13

-param set-default MC_PITCHRATE_P 0.08
-param set-default MC_PITCHRATE_I 0.04
-param set-default MC_PITCHRATE_D 0.001
-param set-default MC_PITCH_P 9
-param set-default MC_ROLLRATE_P 0.08
-param set-default MC_ROLLRATE_I 0.04
-param set-default MC_ROLLRATE_D 0.001
-param set-default MC_ROLL_P 9
+param set-default MC_PITCHRATE_P 0.0800
+param set-default MC_PITCHRATE_I 0.0400
+param set-default MC_PITCHRATE_D 0.0010
+param set-default MC_PITCH_P 9.0
+param set-default MC_ROLLRATE_P 0.0800
+param set-default MC_ROLLRATE_I 0.0400
+param set-default MC_ROLLRATE_D 0.0010
+param set-default MC_ROLL_P 9.0
 param set-default MPC_XY_VEL_I_ACC 4
 param set-default MPC_XY_VEL_P_ACC 3

@ -31,11 +31,11 @@ param set-default MAV_PROTO_VER 2
 param set-default CA_AIRFRAME 0
 param set-default CA_ROTOR_COUNT 6

-param set-default CA_ROTOR0_PX 0
-param set-default CA_ROTOR0_PY 1
+param set-default CA_ROTOR0_PX 0.0
+param set-default CA_ROTOR0_PY 1.0
 param set-default CA_ROTOR0_KM -0.05
-param set-default CA_ROTOR1_PX 0
-param set-default CA_ROTOR1_PY -1
+param set-default CA_ROTOR1_PX 0.0
+param set-default CA_ROTOR1_PY -1.0
 param set-default CA_ROTOR1_KM 0.05
 param set-default CA_ROTOR2_PX 0.866025
 param set-default CA_ROTOR2_PY -0.5
--- a/ROMFS/px4fmu_common/init.d-posix/airframes/CMakeLists.txt
+++ b/ROMFS/px4fmu_common/init.d-posix/airframes/CMakeLists.txt
@ -79,10 +79,6 @@ px4_add_romfs_files(
 	4004_gz_standard_vtol
 	4005_gz_x500_vision
 	4006_gz_px4vision
-	4008_gz_advanced_plane
-	4009_gz_r1_rover
-	4010_gz_x500_mono_cam
-	4011_gz_lawnmower

 	6011_gazebo-classic_typhoon_h480
 	6011_gazebo-classic_typhoon_h480.post
--- a/ROMFS/px4fmu_common/init.d-posix/px4-rc.simulator
+++ b/ROMFS/px4fmu_common/init.d-posix/px4-rc.simulator
@ -36,121 +36,157 @@ if [ "$PX4_SIMULATOR" = "sihsim" ] || [ "$(param show -q SYS_AUTOSTART)" -eq "0"
 		exit 1
 	fi

-elif [ "$PX4_SIMULATOR" = "gz" ] || [ "$(param show -q SIM_GZ_EN)" = "1" ]; then
-	# Use Gazebo
+elif [ "$PX4_SIMULATOR" = "gz" ] || [ "$(param show -q SIM_GZ_EN)" -eq "1" ]; then

-	echo "INFO  [init] Gazebo simulator"
+	# set local coordinate frame reference
+	if [ -n "${PX4_HOME_LAT}" ]; then
+		param set SIM_GZ_HOME_LAT ${PX4_HOME_LAT}
+	fi

-	# Only start up Gazebo if PX4_GZ_STANDALONE is not set.
-	if [ -z "${PX4_GZ_STANDALONE}" ]; then
+	if [ -n "${PX4_HOME_LON}" ]; then
+		param set SIM_GZ_HOME_LON ${PX4_HOME_LON}
+	fi

-		# "gz sim" only available in Garden and later
-		GZ_SIM_VERSIONS=$(gz sim --versions 2>&1)
-		if [ $? -eq 0 ] && [ "${GZ_SIM_VERSIONS}" != "" ]
-		then
-			# "gz sim" from Garden on
-			gz_command="gz"
-			gz_sub_command="sim"
+	if [ -n "${PX4_HOME_ALT}" ]; then
+		param set SIM_GZ_HOME_ALT ${PX4_HOME_LON}
+	fi

-			# Specify render engine if `GZ_SIM_RENDER_ENGINE` is set
-			# (for example, if you want to use Ogre 1.x instead of Ogre 2.x):
-			if [ -n "${PX4_GZ_SIM_RENDER_ENGINE}" ]; then
-				echo "INFO  [init] Setting Gazebo render engine to '${PX4_GZ_SIM_RENDER_ENGINE}'!"
-				gz_sub_command="${gz_sub_command} --render-engine ${PX4_GZ_SIM_RENDER_ENGINE}"
-			fi
-		else
-			echo "ERROR [init] Gazebo gz please install gz-garden"
-			exit 1
-		fi
+	# source generated gz_env.sh for GZ_SIM_RESOURCE_PATH
+	if [ -f ./gz_env.sh ]; then
+		. ./gz_env.sh

-		# look for running ${gz_command} gazebo world
-		gz_world=$( ${gz_command} topic -l | grep -m 1 -e "^/world/.*/clock" | sed 's/\/world\///g; s/\/clock//g' )
+	elif [ -f ../gz_env.sh ]; then
+		. ../gz_env.sh
+	fi

-		# shellcheck disable=SC2153
-		if [ -z "${gz_world}" ] && [ -n "${PX4_GZ_WORLD}" ]; then
-
-			# source generated gz_env.sh for GZ_SIM_RESOURCE_PATH
-			if [ -f ./gz_env.sh ]; then
-				. ./gz_env.sh
-
-			elif [ -f ../gz_env.sh ]; then
-				. ../gz_env.sh
-			fi
-
-			echo "INFO  [init] starting gazebo with world: ${PX4_GZ_WORLDS}/${PX4_GZ_WORLD}.sdf"
-
-			${gz_command} ${gz_sub_command} --verbose=1 -r -s "${PX4_GZ_WORLDS}/${PX4_GZ_WORLD}.sdf" &
-
-			if [ -z "${HEADLESS}" ]; then
-				# HEADLESS not set, starting gui
-				${gz_command} ${gz_sub_command} -g &
-			fi
-
-		else
-			# Gazebo is already running, do not start the simulator, nor the GUI
-			echo "INFO  [init] gazebo already running world: ${gz_world}"
-			PX4_GZ_WORLD=${gz_world}
-		fi
+	# "gz sim" only avaiilable in Garden and later
+	GZ_SIM_VERSIONS=$(gz sim --versions 2>&1)
+	if [ $? -eq 0 ] && [ "${GZ_SIM_VERSIONS}" != "" ]
+	then
+		# "gz sim" from Garden on
+		gz_command="gz"
+		gz_sub_command="sim"
 	else
-		echo "INFO  [init] Standalone PX4 launch, waiting for Gazebo"
+		echo "ERROR [init] Gazebo gz please install gz-garden"
+		exit 1
+	fi
+
+	# look for running ${gz_command} gazebo world
+	gz_world=$( ${gz_command} topic -l | grep -m 1 -e "^/world/.*/clock" | sed 's/\/world\///g; s/\/clock//g' )
+
+	# shellcheck disable=SC2153
+	if [ -z "${gz_world}" ] && [ -n "${PX4_GZ_WORLDS}" ] && [ -n "${PX4_GZ_WORLD}" ]; then
+
+		echo "INFO  [init] starting gazebo with world: ${PX4_GZ_WORLDS}/${PX4_GZ_WORLD}.sdf"
+
+		${gz_command} ${gz_sub_command} --verbose=1 -r -s "${PX4_GZ_WORLDS}/${PX4_GZ_WORLD}.sdf" &
+
+		if [ -z "${HEADLESS}" ]; then
+			# HEADLESS not set, starting gui
+			${gz_command} ${gz_sub_command} -g &
+		fi
+
+	else
+		echo "INFO  [init] gazebo already running world: ${gz_world}"
+		PX4_GZ_WORLD=${gz_world}
 	fi

 	# start gz_bridge
-	if [ -n "${PX4_SIM_MODEL#*gz_}" ] && [ -z "${PX4_GZ_MODEL_NAME}" ]; then
+	if [ -n "${PX4_GZ_MODEL}" ] && [ -z "${PX4_GZ_MODEL_NAME}" ]; then
 		# model specified, gz_bridge will spawn model

 		if [ -n "${PX4_GZ_MODEL_POSE}" ]; then
-			# model pose provided: [x, y, z, roll, pitch, yaw]
-
 			# Clean potential input line formatting.
 			model_pose="$( echo "${PX4_GZ_MODEL_POSE}" | sed -e 's/^[ \t]*//; s/[ \t]*$//; s/,/ /g; s/  / /g; s/ /,/g' )"
 			echo "INFO  [init] PX4_GZ_MODEL_POSE set, spawning at: ${model_pose}"

 		else
-			# model pose not provided, origin will be used
-
 			echo "WARN  [init] PX4_GZ_MODEL_POSE not set, spawning at origin."
 			model_pose="0,0,0,0,0,0"
 		fi

 		# start gz bridge with pose arg.
-		if ! gz_bridge start -p "${model_pose}" -m "${PX4_SIM_MODEL#*gz_}" -w "${PX4_GZ_WORLD}" -i "${px4_instance}"; then
-			echo "ERROR [init] gz_bridge failed to start and spawn model"
+		if gz_bridge start -p "${model_pose}" -m "${PX4_GZ_MODEL}" -w "${PX4_GZ_WORLD}" -i "${px4_instance}"; then
+			if param compare -s SENS_EN_BAROSIM 1
+			then
+				sensor_baro_sim start
+			fi
+			if param compare -s SENS_EN_GPSSIM 1
+			then
+				sensor_gps_sim start
+			fi
+			if param compare -s SENS_EN_MAGSIM 1
+			then
+				sensor_mag_sim start
+			fi
+			if param compare -s SENS_EN_ARSPDSIM 1
+			then
+				sensor_airspeed_sim start
+			fi
+
+		else
+			echo "ERROR [init] gz_bridge failed to start"
 			exit 1
 		fi

-	elif [ -n "${PX4_GZ_MODEL_NAME}" ]; then
+	elif [ -n "${PX4_GZ_MODEL_NAME}" ] && [ -z "${PX4_GZ_MODEL}" ]; then
 		# model name specificed, gz_bridge will attach to existing model

-		echo "INFO  [init] PX4_GZ_MODEL_NAME set, PX4 will attach to existing model"
-		if ! gz_bridge start -n "${PX4_GZ_MODEL_NAME}" -w "${PX4_GZ_WORLD}"; then
-			echo "ERROR [init] gz_bridge failed to start and attach to existing model"
+		if gz_bridge start -n "${PX4_GZ_MODEL_NAME}" -w "${PX4_GZ_WORLD}"; then
+			if param compare -s SENS_EN_BAROSIM 1
+			then
+				sensor_baro_sim start
+			fi
+			if param compare -s SENS_EN_GPSSIM 1
+			then
+				sensor_gps_sim start
+			fi
+			if param compare -s SENS_EN_MAGSIM 1
+			then
+				sensor_mag_sim start
+			fi
+			if param compare -s SENS_EN_ARSPDSIM 1
+			then
+				sensor_airspeed_sim start
+			fi
+
+		else
+			echo "ERROR [init] gz_bridge failed to start"
+			exit 1
+		fi
+
+	elif [ -n "${PX4_SIM_MODEL}" ] && [ -z "${PX4_GZ_MODEL_NAME}" ] && [ -z "${PX4_GZ_MODEL}" ]; then
+
+		echo "WARN  [init] PX4_GZ_MODEL_NAME or PX4_GZ_MODEL not set using PX4_SIM_MODEL."
+
+		if gz_bridge start -m "${PX4_SIM_MODEL#*gz_}" -w "${PX4_GZ_WORLD}" -i "${px4_instance}"; then
+			if param compare -s SENS_EN_BAROSIM 1
+			then
+				sensor_baro_sim start
+			fi
+			if param compare -s SENS_EN_GPSSIM 1
+			then
+				sensor_gps_sim start
+			fi
+			if param compare -s SENS_EN_MAGSIM 1
+			then
+				sensor_mag_sim start
+			fi
+			if param compare -s SENS_EN_ARSPDSIM 1
+			then
+				sensor_airspeed_sim start
+			fi
+
+		else
+			echo "ERROR [init] gz_bridge failed to start"
 			exit 1
 		fi

 	else
-		echo "ERROR [init] failed to pass only PX4_GZ_MODEL_NAME or PX4_SIM_MODEL"
+		echo "ERROR [init] failed to pass only PX4_GZ_MODEL_NAME or PX4_GZ_MODEL"
 		exit 1
 	fi

-	# Start the sensor simulator modules
-	if param compare -s SENS_EN_BAROSIM 1
-	then
-		sensor_baro_sim start
-	fi
-	if param compare -s SENS_EN_GPSSIM 1
-	then
-		sensor_gps_sim start
-	fi
-	if param compare -s SENS_EN_MAGSIM 1
-	then
-		sensor_mag_sim start
-	fi
-	if param compare -s SENS_EN_ARSPDSIM 1
-	then
-		sensor_airspeed_sim start
-	fi
-
 elif [ "$PX4_SIM_MODEL" = "jmavsim_iris" ] || [ "$(param show -q SYS_AUTOSTART)" -eq "10017" ]; then

 	echo "INFO  [init] jMAVSim simulator"
@ -167,12 +203,6 @@ elif [ "$PX4_SIM_MODEL" = "jmavsim_iris" ] || [ "$(param show -q SYS_AUTOSTART)"

 else
 	# otherwise start simulator (mavlink) module
-
-	# EKF2 specifics
-	param set-default EKF2_GPS_DELAY 10
-	param set-default EKF2_MULTI_IMU 3
-	param set-default SENS_IMU_MODE 0
-
 	simulator_tcp_port=$((4560+px4_instance))

 	# Check if PX4_SIM_HOSTNAME environment variable is empty
--- a/ROMFS/px4fmu_common/init.d-posix/rcS
+++ b/ROMFS/px4fmu_common/init.d-posix/rcS
@ -153,6 +153,7 @@ fi

 param set-default BAT1_N_CELLS 4

+param set-default CBRK_AIRSPD_CHK 0
 param set-default CBRK_SUPPLY_CHK 894281

 # disable check, no CPU load reported on posix yet
@ -164,6 +165,10 @@ param set-default COM_RC_IN_MODE 1
 # Speedup SITL startup
 param set-default EKF2_REQ_GPS_H 0.5

+# Multi-EKF
+param set-default EKF2_MULTI_IMU 3
+param set-default SENS_IMU_MODE 0
+
 param set-default IMU_GYRO_FFT_EN 1
 param set-default MAV_PROTO_VER 2 # Ensures QGC does not drop the first few packets after a SITL restart due to MAVLINK 1 packets

@ -244,12 +249,7 @@ then
 fi

 load_mon start
-
-if param compare SIM_BAT_ENABLE 1
-then
-	battery_simulator start
-fi
-
+battery_simulator start
 tone_alarm start
 rc_update start
 manual_control start
--- a/ROMFS/px4fmu_common/init.d/CMakeLists.txt
+++ b/ROMFS/px4fmu_common/init.d/CMakeLists.txt
@ -34,79 +34,26 @@
 add_subdirectory(airframes)

 px4_add_romfs_files(
-
+	rc.airship_apps
+	rc.airship_defaults
 	rc.autostart_ext
-
-	rcS
-	rc.sensors
-	rc.vehicle_setup
-
-	# TODO
 	rc.balloon_apps
 	rc.balloon_defaults
+	rc.boat_defaults
+	rc.fw_apps
+	rc.fw_defaults
+	rc.heli_defaults
+	rc.logging
+	rc.mc_apps
+	rc.mc_defaults
+	rcS
+	rc.sensors
+	rc.thermal_cal
+	rc.rover_apps
+	rc.rover_defaults
+	rc.uuv_apps
+	rc.uuv_defaults
+	rc.vehicle_setup
+	rc.vtol_apps
+	rc.vtol_defaults
 )
-
-if(CONFIG_MODULES_AIRSHIP_ATT_CONTROL)
-	px4_add_romfs_files(
-		rc.airship_apps
-		rc.airship_defaults
-	)
-endif()
-
-if(CONFIG_MODULES_FW_RATE_CONTROL)
-	px4_add_romfs_files(
-		rc.fw_apps
-		rc.fw_defaults
-	)
-endif()
-
-if(CONFIG_MODULES_MC_RATE_CONTROL)
-	px4_add_romfs_files(
-		rc.heli_defaults
-		rc.mc_apps
-		rc.mc_defaults
-	)
-endif()
-
-if(CONFIG_MODULES_ROVER_POS_CONTROL)
-	px4_add_romfs_files(
-		rc.rover_apps
-		rc.rover_defaults
-
-		rc.boat_defaults # hack
-	)
-endif()
-
-if(CONFIG_MODULES_DIFFERENTIAL_DRIVE)
-	px4_add_romfs_files(
-		rc.rover_differential_apps
-		rc.rover_differential_defaults
-	)
-endif()
-
-if(CONFIG_MODULES_UUV_ATT_CONTROL)
-	px4_add_romfs_files(
-		rc.uuv_apps
-		rc.uuv_defaults
-	)
-endif()
-
-if(CONFIG_MODULES_VTOL_ATT_CONTROL)
-	px4_add_romfs_files(
-		rc.vtol_apps
-		rc.vtol_defaults
-	)
-endif()
-
-
-if(CONFIG_MODULES_LOGGER)
-	px4_add_romfs_files(
-		rc.logging
-	)
-endif()
-
-if(CONFIG_MODULES_TEMPERATURE_COMPENSATION)
-	px4_add_romfs_files(
-		rc.thermal_cal
-	)
-endif()
--- a/ROMFS/px4fmu_common/init.d/airframes/1001_rc_quad_x.hil
+++ b/ROMFS/px4fmu_common/init.d/airframes/1001_rc_quad_x.hil
@ -11,30 +11,30 @@

 . ${R}etc/init.d/rc.mc_defaults

+
 param set SYS_HITL 1

 param set UAVCAN_ENABLE 0

-# disable some checks to allow to fly
-# - without real battery
-param set-default CBRK_SUPPLY_CHK 894281
-# - without safety switch
-param set-default CBRK_IO_SAFETY 22027
-
-# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
 param set-default CA_ROTOR3_KM -0.05

 param set-default HIL_ACT_FUNC1 101
 param set-default HIL_ACT_FUNC2 102
 param set-default HIL_ACT_FUNC3 103
 param set-default HIL_ACT_FUNC4 104
+
+# disable some checks to allow to fly
+# - without real battery
+param set-default CBRK_SUPPLY_CHK 894281
+# - without safety switch
+param set-default CBRK_IO_SAFETY 22027
--- a/ROMFS/px4fmu_common/init.d/airframes/1002_standard_vtol.hil
+++ b/ROMFS/px4fmu_common/init.d/airframes/1002_standard_vtol.hil
@ -14,6 +14,7 @@

 . ${R}etc/init.d/rc.vtol_defaults

+
 param set-default BAT1_N_CELLS 3

 param set-default COM_RC_IN_MODE 1
@ -54,29 +55,26 @@ param set-default VT_TYPE 2

 param set-default CA_AIRFRAME 2
 param set-default CA_ROTOR_COUNT 5
-param set-default CA_ROTOR4_AX 1
-param set-default CA_ROTOR4_AZ 0
-param set-default CA_ROTOR4_PX 0.2
-
-# Square quadrotor X PX4 numbering
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
 param set-default CA_ROTOR3_KM -0.05
+param set-default CA_ROTOR4_AX 1.0
+param set-default CA_ROTOR4_AZ 0.0
+param set-default CA_ROTOR4_PX 0.2

 param set-default CA_SV_CS_COUNT 3
 param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3

 param set-default HIL_ACT_FUNC1 101
@ -100,3 +98,5 @@ param set-default CBRK_SUPPLY_CHK 894281
 param set-default CBRK_IO_SAFETY 22027

 param set-default MAV_TYPE 22
+
+
--- a/ROMFS/px4fmu_common/init.d/airframes/1100_rc_quad_x_sih.hil
+++ b/ROMFS/px4fmu_common/init.d/airframes/1100_rc_quad_x_sih.hil
@ -12,8 +12,26 @@

 . ${R}etc/init.d/rc.mc_defaults

+
 param set UAVCAN_ENABLE 0

+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
+param set-default CA_ROTOR3_KM -0.05
+
+param set-default HIL_ACT_FUNC1 101
+param set-default HIL_ACT_FUNC2 102
+param set-default HIL_ACT_FUNC3 103
+param set-default HIL_ACT_FUNC4 104
+
 # set SYS_HITL to 2 to start the SIH and avoid sensors startup
 param set SYS_HITL 2

@ -24,21 +42,3 @@ param set-default CBRK_SUPPLY_CHK 894281
 param set-default CBRK_IO_SAFETY 22027

 param set SIH_VEHICLE_TYPE 0
-
-# Square quadrotor X PX4 numbering
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default HIL_ACT_FUNC1 101
-param set-default HIL_ACT_FUNC2 102
-param set-default HIL_ACT_FUNC3 103
-param set-default HIL_ACT_FUNC4 104
--- a/ROMFS/px4fmu_common/init.d/airframes/1101_rc_plane_sih.hil
+++ b/ROMFS/px4fmu_common/init.d/airframes/1101_rc_plane_sih.hil
@ -21,9 +21,9 @@ param set-default CA_ROTOR0_PX 0.3
 param set-default CA_SV_CS_COUNT 4
 param set-default CA_SV_CS0_TRQ_R 0.5
 param set-default CA_SV_CS0_TYPE 2
-param set-default CA_SV_CS1_TRQ_P 1
+param set-default CA_SV_CS1_TRQ_P 1.0
 param set-default CA_SV_CS1_TYPE 3
-param set-default CA_SV_CS2_TRQ_Y 1
+param set-default CA_SV_CS2_TRQ_Y 1.0
 param set-default CA_SV_CS2_TYPE 4
 param set-default CA_SV_CS3_TYPE 10

@ -46,7 +46,7 @@ param set-default CBRK_IO_SAFETY 22027

 param set-default BAT_N_CELLS 3

-param set SIH_T_MAX 6
+param set SIH_T_MAX 6.0
 param set SIH_MASS 0.3
 param set SIH_IXX 0.00402
 param set SIH_IYY 0.0144
--- a/ROMFS/px4fmu_common/init.d/airframes/1102_tailsitter_duo_sih.hil
+++ b/ROMFS/px4fmu_common/init.d/airframes/1102_tailsitter_duo_sih.hil
@ -71,7 +71,7 @@ param set SIH_MASS 0.2
 param set SIH_IXX 0.00354
 param set SIH_IYY 0.000625
 param set SIH_IZZ 0.00300
-param set SIH_IXZ 0
+param set SIH_IXZ 0.0
 param set SIH_KDV 0.2
 param set SIH_L_ROLL 0.145

--- a/ROMFS/px4fmu_common/init.d/airframes/13000_generic_vtol_standard
+++ b/ROMFS/px4fmu_common/init.d/airframes/13000_generic_vtol_standard
@ -14,21 +14,6 @@

 param set-default CA_AIRFRAME 2
 param set-default CA_ROTOR_COUNT 5
-param set-default CA_ROTOR4_AX 1
-param set-default CA_ROTOR4_AZ 0
-param set-default CA_SV_CS_COUNT 4
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS2_TRQ_P 1
-param set-default CA_SV_CS3_TRQ_Y 1
-param set-default CA_SV_CS3_TYPE 4
-param set-default VT_TYPE 2
-param set-default MAV_TYPE 22
-
-# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR0_PX 1
 param set-default CA_ROTOR0_PY 1
 param set-default CA_ROTOR1_PX -1
@ -39,3 +24,16 @@ param set-default CA_ROTOR2_KM -0.05
 param set-default CA_ROTOR3_PX -1
 param set-default CA_ROTOR3_PY 1
 param set-default CA_ROTOR3_KM -0.05
+param set-default CA_ROTOR4_AX 1.0
+param set-default CA_ROTOR4_AZ 0.0
+param set-default CA_SV_CS_COUNT 4
+param set-default CA_SV_CS0_TYPE 1
+param set-default CA_SV_CS0_TRQ_R -0.5
+param set-default CA_SV_CS1_TYPE 2
+param set-default CA_SV_CS1_TRQ_R 0.5
+param set-default CA_SV_CS2_TYPE 3
+param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS3_TRQ_Y 1.0
+param set-default CA_SV_CS3_TYPE 4
+param set-default VT_TYPE 2
+param set-default MAV_TYPE 22
--- a/ROMFS/px4fmu_common/init.d/airframes/13013_deltaquad
+++ b/ROMFS/px4fmu_common/init.d/airframes/13013_deltaquad
@ -28,13 +28,13 @@ param set-default BAT1_CAPACITY 23000
 param set-default BAT1_N_CELLS 4
 param set-default BAT1_R_INTERNAL 0.0025

-param set-default SYS_HAS_NUM_ASPD 0
+param set-default CBRK_AIRSPD_CHK 162128
 param set-default CBRK_IO_SAFETY 22027

 param set-default EKF2_GPS_POS_X -0.12
 param set-default EKF2_IMU_POS_X -0.12

-param set-default FW_USE_AIRSPD 0
+param set-default FW_ARSP_MODE 1
 param set-default NPFG_PERIOD 25
 param set-default FW_PR_FF 0.7
 param set-default FW_PR_I 0.18
@ -120,8 +120,8 @@ param set-default CA_ROTOR2_KM -0.05
 param set-default CA_ROTOR3_PX -0.1515
 param set-default CA_ROTOR3_PY 0.1875
 param set-default CA_ROTOR3_KM -0.05
-param set-default CA_ROTOR4_AX 1
-param set-default CA_ROTOR4_AZ 0
+param set-default CA_ROTOR4_AX 1.0
+param set-default CA_ROTOR4_AZ 0.0
 param set-default CA_ROTOR4_PX 0.2

 param set-default CA_SV_CS_COUNT 3
@ -130,4 +130,4 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS1_TYPE 2
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
--- a/ROMFS/px4fmu_common/init.d/airframes/13014_vtol_babyshark
+++ b/ROMFS/px4fmu_common/init.d/airframes/13014_vtol_babyshark
@ -80,10 +80,6 @@ param set-default VT_TYPE 2

 param set-default CA_AIRFRAME 2
 param set-default CA_ROTOR_COUNT 5
-param set-default CA_ROTOR4_AX 1
-param set-default CA_ROTOR4_AZ 0
-
-# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR0_PX 1
 param set-default CA_ROTOR0_PY 1
 param set-default CA_ROTOR1_PX -1
@ -94,16 +90,18 @@ param set-default CA_ROTOR2_KM -0.05
 param set-default CA_ROTOR3_PX -1
 param set-default CA_ROTOR3_PY 1
 param set-default CA_ROTOR3_KM -0.05
+param set-default CA_ROTOR4_AX 1.0
+param set-default CA_ROTOR4_AZ 0.0

 param set-default CA_SV_CS_COUNT 3
 param set-default CA_SV_CS0_TYPE 15
-param set-default CA_SV_CS0_TRQ_R 1
-param set-default CA_SV_CS1_TRQ_P 0.5
-param set-default CA_SV_CS1_TRQ_R 0
-param set-default CA_SV_CS1_TRQ_Y -0.5
+param set-default CA_SV_CS0_TRQ_R 1.0
+param set-default CA_SV_CS1_TRQ_P 0.5000
+param set-default CA_SV_CS1_TRQ_R 0.0000
+param set-default CA_SV_CS1_TRQ_Y -0.5000
 param set-default CA_SV_CS1_TYPE 13
-param set-default CA_SV_CS2_TRQ_P 0.5
-param set-default CA_SV_CS2_TRQ_Y 0.5
+param set-default CA_SV_CS2_TRQ_P 0.5000
+param set-default CA_SV_CS2_TRQ_Y 0.5000
 param set-default CA_SV_CS2_TYPE 14

 param set-default PWM_MAIN_FUNC1 201
--- a/ROMFS/px4fmu_common/init.d/airframes/13030_generic_vtol_quad_tiltrotor
+++ b/ROMFS/px4fmu_common/init.d/airframes/13030_generic_vtol_quad_tiltrotor
@ -19,30 +19,30 @@ param set-default MAV_TYPE 21
 param set-default VT_TYPE 1

 param set-default CA_AIRFRAME 3
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
 param set-default CA_ROTOR0_TILT 1
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
 param set-default CA_ROTOR1_TILT 2
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
+param set-default CA_ROTOR2_KM -0.05
 param set-default CA_ROTOR2_TILT 3
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
+param set-default CA_ROTOR3_KM -0.05
 param set-default CA_ROTOR3_TILT 4
 param set-default CA_SV_CS_COUNT 4
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
+param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_TL_COUNT 4

-# Square quadrotor X PX4 numbering
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
-param set-default CA_ROTOR3_KM -0.05
+
--- a/ROMFS/px4fmu_common/init.d/airframes/13100_generic_vtol_tiltrotor
+++ b/ROMFS/px4fmu_common/init.d/airframes/13100_generic_vtol_tiltrotor
@ -12,22 +12,19 @@
 . ${R}etc/init.d/rc.vtol_defaults

 param set-default CA_AIRFRAME 3
-param set-default CA_ROTOR0_TILT 2
-param set-default CA_ROTOR2_TILT 1
-
-# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
 param set-default CA_ROTOR0_PX 1
 param set-default CA_ROTOR0_PY 1
+param set-default CA_ROTOR0_TILT 2
 param set-default CA_ROTOR1_PX -1
 param set-default CA_ROTOR1_PY -1
 param set-default CA_ROTOR2_PX 1
 param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR2_TILT 1
 param set-default CA_ROTOR2_KM -0.05
 param set-default CA_ROTOR3_PX -1
 param set-default CA_ROTOR3_PY 1
 param set-default CA_ROTOR3_KM -0.05
-
 param set-default CA_SV_CS_COUNT 4
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS0_TRQ_R -0.5
--- a/ROMFS/px4fmu_common/init.d/airframes/14001_generic_mc_with_tilt
+++ b/ROMFS/px4fmu_common/init.d/airframes/14001_generic_mc_with_tilt
@ -20,16 +20,16 @@ param set-default MAV_TYPE 15

 param set-default CA_AIRFRAME 8
 # Tricopter
-param set-default CA_ROTOR0_PX 0.25
-param set-default CA_ROTOR0_PY 0.433
-param set-default CA_ROTOR1_PX 0.25
-param set-default CA_ROTOR1_PY -0.43
-param set-default CA_ROTOR2_PX -0.5
-param set-default CA_ROTOR2_PY 0
+param set-default CA_ROTOR0_PX 0.2500
+param set-default CA_ROTOR0_PY 0.4330
+param set-default CA_ROTOR1_PX 0.2500
+param set-default CA_ROTOR1_PY -0.4300
+param set-default CA_ROTOR2_PX -0.5000
+param set-default CA_ROTOR2_PY 0.0000
 param set-default CA_ROTOR2_TILT 1
 param set-default CA_ROTOR_COUNT 3
-param set-default CA_SV_TL0_MAXA 45
-param set-default CA_SV_TL0_MINA -45
+param set-default CA_SV_TL0_MAXA 45.0000
+param set-default CA_SV_TL0_MINA -45.0000
 param set-default CA_SV_TL0_TD 90
 param set-default CA_SV_TL_COUNT 1

--- a/ROMFS/px4fmu_common/init.d/airframes/2100_standard_plane
+++ b/ROMFS/px4fmu_common/init.d/airframes/2100_standard_plane
@ -18,7 +18,7 @@ param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1
+param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
--- a/ROMFS/px4fmu_common/init.d/airframes/2106_albatross
+++ b/ROMFS/px4fmu_common/init.d/airframes/2106_albatross
@ -35,17 +35,17 @@ param set-default FW_W_RMAX 0
 param set-default CA_AIRFRAME 1
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_SV_CS_COUNT 7
-param set-default CA_SV_CS0_TRQ_R -0.5
+param set-default CA_SV_CS0_TRQ_R -0.5000
 param set-default CA_SV_CS0_TYPE 1 #left aileron
-param set-default CA_SV_CS1_TRQ_R 0.5
+param set-default CA_SV_CS1_TRQ_R 0.5000
 param set-default CA_SV_CS1_TYPE 2 #right aileron
-param set-default CA_SV_CS2_TRQ_P 0.5
-param set-default CA_SV_CS2_TRQ_Y -0.5
+param set-default CA_SV_CS2_TRQ_P 0.5000
+param set-default CA_SV_CS2_TRQ_Y -0.5000
 param set-default CA_SV_CS2_TYPE 13 #left A-tail
-param set-default CA_SV_CS3_TRQ_P 0.5
-param set-default CA_SV_CS3_TRQ_Y 0.5
+param set-default CA_SV_CS3_TRQ_P 0.5000
+param set-default CA_SV_CS3_TRQ_Y 0.5000
 param set-default CA_SV_CS3_TYPE 14 #right A-tail
-param set-default CA_SV_CS4_TRQ_Y 1
+param set-default CA_SV_CS4_TRQ_Y 1.0000
 param set-default CA_SV_CS4_TYPE 12
 param set-default CA_SV_CS5_TYPE 9 #left flap
 param set-default CA_SV_CS6_TYPE 10 #right flap
--- a/ROMFS/px4fmu_common/init.d/airframes/2507_cloudship
+++ b/ROMFS/px4fmu_common/init.d/airframes/2507_cloudship
@ -21,21 +21,21 @@ param set-default CBRK_IO_SAFETY 22027
 param set-default CA_AIRFRAME 9

 param set-default CA_ROTOR_COUNT 3
-param set-default CA_ROTOR0_AX 1
-param set-default CA_ROTOR0_AZ 0
-param set-default CA_ROTOR0_KM 0
-param set-default CA_ROTOR0_PY 2
-param set-default CA_ROTOR1_AX 1
-param set-default CA_ROTOR1_AZ 0
-param set-default CA_ROTOR1_KM 0
-param set-default CA_ROTOR1_PY -2
-param set-default CA_ROTOR2_AY -1
-param set-default CA_ROTOR2_AZ 0
-param set-default CA_ROTOR2_KM 0
-param set-default CA_ROTOR2_PX -10
+param set-default CA_ROTOR0_AX 1.0000
+param set-default CA_ROTOR0_AZ 0.0000
+param set-default CA_ROTOR0_KM 0.0000
+param set-default CA_ROTOR0_PY 2.0000
+param set-default CA_ROTOR1_AX 1.0000
+param set-default CA_ROTOR1_AZ 0.0000
+param set-default CA_ROTOR1_KM 0.0000
+param set-default CA_ROTOR1_PY -2.0000
+param set-default CA_ROTOR2_AY -1.0000
+param set-default CA_ROTOR2_AZ 0.0000
+param set-default CA_ROTOR2_KM 0.0000
+param set-default CA_ROTOR2_PX -10.0000

 param set-default CA_SV_CS_COUNT 1
-param set-default CA_SV_CS0_TRQ_P 1
+param set-default CA_SV_CS0_TRQ_P 1.0000

 param set-default CA_R_REV 7

--- a/ROMFS/px4fmu_common/init.d/airframes/4001_quad_x
+++ b/ROMFS/px4fmu_common/init.d/airframes/4001_quad_x
@ -10,15 +10,15 @@

 . ${R}etc/init.d/rc.mc_defaults

-# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
 param set-default CA_ROTOR3_KM -0.05
+
--- a/ROMFS/px4fmu_common/init.d/airframes/4014_s500
+++ b/ROMFS/px4fmu_common/init.d/airframes/4014_s500
@ -18,15 +18,14 @@ param set-default MC_PITCHRATE_P 0.18
 param set-default MC_ROLLRATE_I 0.15
 param set-default MC_PITCHRATE_I 0.15

-# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
 param set-default CA_ROTOR3_KM -0.05
--- a/ROMFS/px4fmu_common/init.d/airframes/4015_holybro_s500
+++ b/ROMFS/px4fmu_common/init.d/airframes/4015_holybro_s500
@ -22,15 +22,14 @@ param set-default MC_PITCHRATE_I 0.3
 param set-default MC_ROLLRATE_D 0.004
 param set-default MC_PITCHRATE_D 0.004

-# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
 param set-default CA_ROTOR3_KM -0.05
--- a/ROMFS/px4fmu_common/init.d/airframes/4016_holybro_px4vision
+++ b/ROMFS/px4fmu_common/init.d/airframes/4016_holybro_px4vision
@ -45,8 +45,12 @@ param set-default MAV_1_MODE 9
 param set-default SER_TEL1_BAUD 921600

 # Vehicle attitude PID tuning
+param set-default MC_ACRO_EXPO 0
+param set-default MC_ACRO_EXPO_Y 0
 param set-default MC_ACRO_P_MAX 200
 param set-default MC_ACRO_R_MAX 200
+param set-default MC_ACRO_SUPEXPO 0
+param set-default MC_ACRO_SUPEXPOY 0
 param set-default MC_ACRO_Y_MAX 150
 param set-default MC_PITCHRATE_D 0.0015
 param set-default MC_ROLLRATE_D 0.0015
@ -97,17 +101,18 @@ param set-default CBRK_IO_SAFETY 22027

 param set-default THR_MDL_FAC 0.3

-# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
 param set-default CA_ROTOR3_KM -0.05

 # Outputs
@ -115,3 +120,4 @@ param set-default PWM_AUX_FUNC1 101
 param set-default PWM_AUX_FUNC2 102
 param set-default PWM_AUX_FUNC3 103
 param set-default PWM_AUX_FUNC4 104
+
--- a/ROMFS/px4fmu_common/init.d/airframes/4017_nxp_hovergames
+++ b/ROMFS/px4fmu_common/init.d/airframes/4017_nxp_hovergames
@ -21,15 +21,14 @@ param set-default MC_ROLLRATE_I 0.15
 param set-default MC_PITCHRATE_P 0.18
 param set-default MC_PITCHRATE_I 0.15

-# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
 param set-default CA_ROTOR3_KM -0.05
--- a/ROMFS/px4fmu_common/init.d/airframes/4019_x500_v2
+++ b/ROMFS/px4fmu_common/init.d/airframes/4019_x500_v2
@ -22,20 +22,19 @@ param set-default MC_PITCHRATE_I 0.3
 param set-default MC_ROLLRATE_D 0.004
 param set-default MC_PITCHRATE_D 0.004

+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.25
+param set-default CA_ROTOR0_PY 0.25
+param set-default CA_ROTOR1_PX -0.25
+param set-default CA_ROTOR1_PY -0.25
+param set-default CA_ROTOR2_PX 0.25
+param set-default CA_ROTOR2_PY -0.25
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.25
+param set-default CA_ROTOR3_PY 0.25
+param set-default CA_ROTOR3_KM -0.05
+
 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
 param set-default PWM_MAIN_FUNC3 103
 param set-default PWM_MAIN_FUNC4 104
-
-# Square quadrotor X PX4 numbering
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
-param set-default CA_ROTOR3_KM -0.05
--- a/ROMFS/px4fmu_common/init.d/airframes/4020_holybro_px4vision_v1_5
+++ b/ROMFS/px4fmu_common/init.d/airframes/4020_holybro_px4vision_v1_5
@ -45,8 +45,12 @@ param set-default MAV_1_MODE 9
 param set-default SER_TEL1_BAUD 921600

 # Vehicle attitude PID tuning
+param set-default MC_ACRO_EXPO 0
+param set-default MC_ACRO_EXPO_Y 0
 param set-default MC_ACRO_P_MAX 200
 param set-default MC_ACRO_R_MAX 200
+param set-default MC_ACRO_SUPEXPO 0
+param set-default MC_ACRO_SUPEXPOY 0
 param set-default MC_ACRO_Y_MAX 150
 param set-default MC_PITCHRATE_D 0.0015
 param set-default MC_ROLLRATE_D 0.0015
@ -98,17 +102,18 @@ param set-default CBRK_IO_SAFETY 22027

 param set-default THR_MDL_FAC 0.3

-# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
 param set-default CA_ROTOR3_KM -0.05

 # Outputs
@ -116,3 +121,4 @@ param set-default PWM_AUX_FUNC1 101
 param set-default PWM_AUX_FUNC2 102
 param set-default PWM_AUX_FUNC3 103
 param set-default PWM_AUX_FUNC4 104
+
--- a/ROMFS/px4fmu_common/init.d/airframes/4040_reaper
+++ b/ROMFS/px4fmu_common/init.d/airframes/4040_reaper
@ -0,0 +1,65 @@
+#!/bin/sh
+#
+# @name Reaper 500 Quad
+#
+# @type Quadrotor H
+# @class Copter
+#
+# @maintainer Blankered
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+param set-default MC_ROLLRATE_P 0.14
+param set-default MC_ROLLRATE_I 0.1
+param set-default MC_ROLLRATE_D 0.004
+param set-default MC_PITCH_P 6
+param set-default MC_PITCHRATE_P 0.14
+param set-default MC_PITCHRATE_I 0.09
+param set-default MC_PITCHRATE_D 0.004
+param set-default MC_YAW_P 4
+
+param set-default NAV_ACC_RAD 2
+
+param set-default RTL_RETURN_ALT 30
+param set-default RTL_DESCEND_ALT 10
+
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR0_KM -0.05
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR1_KM -0.05
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
+param set-default CA_ROTOR2_KM 0.05
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
+param set-default CA_ROTOR3_KM 0.05
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+param set-default PWM_MAIN_MIN1 1100
+param set-default PWM_MAIN_MIN2 1100
+param set-default PWM_MAIN_MIN3 1100
+param set-default PWM_MAIN_MIN4 1100
+param set-default PWM_MAIN_MAX1 1900
+param set-default PWM_MAIN_MAX2 1900
+param set-default PWM_MAIN_MAX3 1900
+param set-default PWM_MAIN_MAX4 1900
+
+param set-default PWM_MAIN_TIM0 50
+param set-default PWM_MAIN_TIM1 50
+param set-default PWM_MAIN_TIM2 50
+
+param set-default PWM_AUX_TIM0 50
+param set-default PWM_AUX_TIM1 50
+param set-default PWM_AUX_TIM2 50
+
+
--- a/ROMFS/px4fmu_common/init.d/airframes/4041_beta75x
+++ b/ROMFS/px4fmu_common/init.d/airframes/4041_beta75x
@ -46,20 +46,22 @@ param set-default SYS_HAS_MAG 0

 param set-default BAT1_N_CELLS 2

-# Square quadrotor X with reverse turn direction
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
+param set-default CA_ROTOR0_PX 0.03
+param set-default CA_ROTOR0_PY 0.03
 param set-default CA_ROTOR0_KM -0.05
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
+param set-default CA_ROTOR1_PX -0.03
+param set-default CA_ROTOR1_PY -0.03
 param set-default CA_ROTOR1_KM -0.05
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR2_PX 0.03
+param set-default CA_ROTOR2_PY -0.03
+param set-default CA_ROTOR2_KM 0.05
+param set-default CA_ROTOR3_PX -0.03
+param set-default CA_ROTOR3_PY 0.03
+param set-default CA_ROTOR3_KM 0.05

 param set-default PWM_MAIN_FUNC1 104
 param set-default PWM_MAIN_FUNC2 101
 param set-default PWM_MAIN_FUNC3 102
 param set-default PWM_MAIN_FUNC4 103
+
--- a/ROMFS/px4fmu_common/init.d/airframes/4050_generic_250
+++ b/ROMFS/px4fmu_common/init.d/airframes/4050_generic_250
@ -36,15 +36,16 @@ param set-default SDLOG_PROFILE 19
 param set-default IMU_DGYRO_CUTOFF 50
 param set-default IMU_GYRO_CUTOFF 90

-# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
 param set-default CA_ROTOR3_KM -0.05
+
+
--- a/ROMFS/px4fmu_common/init.d/airframes/4052_holybro_qav250
+++ b/ROMFS/px4fmu_common/init.d/airframes/4052_holybro_qav250
@ -46,20 +46,20 @@ param set-default MPC_Z_VEL_I_ACC 1.7

 param set-default THR_MDL_FAC 0.3

-# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
 param set-default CA_ROTOR3_KM -0.05

 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
 param set-default PWM_MAIN_FUNC3 103
 param set-default PWM_MAIN_FUNC4 104
+
--- a/ROMFS/px4fmu_common/init.d/airframes/4053_holybro_kopis2
+++ b/ROMFS/px4fmu_common/init.d/airframes/4053_holybro_kopis2
@ -53,17 +53,16 @@ param set-default MC_AIRMODE 1

 param set-default EV_TSK_RC_LOSS 1

-# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
 param set-default CA_ROTOR3_KM -0.05

 param set-default PWM_MAIN_FUNC1 104
@ -73,3 +72,5 @@ param set-default PWM_MAIN_FUNC4 103

 param set-default PWM_MAIN_TIM0 -2
 param set-default PWM_MAIN_TIM1 -2
+
+
--- a/ROMFS/px4fmu_common/init.d/airframes/4061_atl_mantis_edu
+++ b/ROMFS/px4fmu_common/init.d/airframes/4061_atl_mantis_edu
@ -11,11 +11,12 @@

 . ${R}etc/init.d/rc.mc_defaults

+
 # Battery settings
 param set-default BAT_CRIT_THR 0.20
 param set-default BAT_LOW_THR 0.25

-param set-default BAT1_CAPACITY 2800
+param set-default BAT1_CAPACITY 2800.0
 param set-default BAT1_N_CELLS 3
 param set-default BAT1_R_INTERNAL 0.02
 param set-default BAT1_V_CHARGED 4.26
@ -37,7 +38,7 @@ param set-default COM_RC_LOSS_T 3

 # ekf2
 param set-default EKF2_TERR_MASK 1
-param set-default EKF2_BARO_NOISE 2
+param set-default EKF2_BARO_NOISE 2.0

 param set-default EKF2_BCOEF_X 31.5
 param set-default EKF2_BCOEF_Y 25.5
@ -55,11 +56,11 @@ param set-default EKF2_MAG_NOISE 0.1
 param set-default EKF2_MIN_RNG 0.15

 param set-default EKF2_OF_DELAY 38
-param set-default EKF2_OF_GATE 2
+param set-default EKF2_OF_GATE 2.0
 param set-default EKF2_OF_POS_X -0.035
 param set-default EKF2_OF_POS_Z 0.033
 param set-default EKF2_OF_MIN_RNG 0.01
-param set-default EKF2_OF_A_HMAX 7
+param set-default EKF2_OF_A_HMAX 7.0
 param set-default EKF2_OF_QMIN 30

 param set-default EKF2_PCOEF_XN -0.3
@ -67,18 +68,18 @@ param set-default EKF2_PCOEF_XP -0.4
 param set-default EKF2_PCOEF_YN -0.4
 param set-default EKF2_PCOEF_YP -0.4

-param set-default EKF2_RNG_A_VMAX 1
+param set-default EKF2_RNG_A_VMAX 1.0
 param set-default EKF2_RNG_CTRL 0
 param set-default EKF2_RNG_DELAY 55
 param set-default EKF2_RNG_POS_X -0.035
-param set-default EKF2_RNG_POS_Y 0
+param set-default EKF2_RNG_POS_Y 0.0
 param set-default EKF2_RNG_POS_Z 0.033

-param set-default EKF2_TERR_NOISE 1
+param set-default EKF2_TERR_NOISE 1.0


 # Maximum allowed angle velocity in the landed state
-param set-default LNDMC_ROT_MAX 40
+param set-default LNDMC_ROT_MAX 40.0

 # Maximum vertical velocity allowed in the landed state
 param set-default LNDMC_Z_VEL_MAX 0.7
@ -93,36 +94,36 @@ param set-default IMU_GYRO_CUTOFF 65
 param set-default MC_PITCHRATE_P 0.075
 param set-default MC_PITCHRATE_I 0.1
 param set-default MC_PITCHRATE_D 0.0005
-param set-default MC_PITCHRATE_MAX 360
-param set-default MC_PITCH_P 8
+param set-default MC_PITCHRATE_MAX 360.0
+param set-default MC_PITCH_P 8.0

 # Roll angle & rate setting
 param set-default MC_ROLLRATE_P 0.055
 param set-default MC_ROLLRATE_I 0.1
 param set-default MC_ROLLRATE_D 0.0005
-param set-default MC_ROLLRATE_MAX 360
-param set-default MC_ROLL_P 8
+param set-default MC_ROLLRATE_MAX 360.0
+param set-default MC_ROLL_P 8.0

 # Yaw angle & rate setting
 param set-default MC_YAWRATE_P 0.1
-param set-default MC_YAWRATE_MAX 120
+param set-default MC_YAWRATE_MAX 120.0
 param set-default MC_YAW_P 2.5

-param set-default MPC_ACC_DOWN_MAX 2
-param set-default MPC_ACC_HOR 3
-param set-default MPC_ACC_HOR_MAX 10
-param set-default MPC_ACC_UP_MAX 3
+param set-default MPC_ACC_DOWN_MAX 2.0
+param set-default MPC_ACC_HOR 3.0
+param set-default MPC_ACC_HOR_MAX 10.0
+param set-default MPC_ACC_UP_MAX 3.0
 param set-default MPC_ALT_MODE 0
 param set-default MPC_LAND_SPEED 0.5
 param set-default MPC_MAN_TILT_MAX 20
-param set-default MPC_YAWRAUTO_MAX 80
+param set-default MPC_YAWRAUTO_MAX 80.0
 param set-default MPC_THR_HOVER 0.54
 param set-default MPC_THR_MAX 0.9
 param set-default MPC_THR_MIN 0.06
 param set-default MPC_TILTMAX_AIR 30
-param set-default MPC_XY_P 1
-param set-default MPC_Z_P 2
-param set-default MPC_Z_VEL_MAX_DN 2
+param set-default MPC_XY_P 1.0
+param set-default MPC_Z_P 2.0
+param set-default MPC_Z_VEL_MAX_DN 2.0

 # gimbal configuration
 param set-default MNT_MODE_IN 0
@ -149,22 +150,21 @@ param set-default RC1_TRIM          1000
 # optical flow
 param set-default SENS_FLOW_MAXR   7.4
 param set-default SENS_FLOW_MINHGT 0.15
-param set-default SENS_FLOW_MAXHGT 5
+param set-default SENS_FLOW_MAXHGT 5.0

 # ignore the SD card errors and use normal startup sound
 set STARTUP_TUNE "1"

-# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
 param set-default CA_ROTOR3_KM -0.05

 param set-default TAP_ESC_FUNC1 101
--- a/ROMFS/px4fmu_common/init.d/airframes/4071_ifo
+++ b/ROMFS/px4fmu_common/init.d/airframes/4071_ifo
@ -73,22 +73,23 @@ param set-default MAV_1_CONFIG 102
 param set-default MAV_1_MODE 0
 param set-default SER_TEL2_BAUD 57600

-param set-default PWM_MAIN_TIM0 0

-# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
 param set-default CA_ROTOR3_KM -0.05

+param set-default PWM_MAIN_TIM0 0
+
 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
 param set-default PWM_MAIN_FUNC3 103
 param set-default PWM_MAIN_FUNC4 104
+
--- a/ROMFS/px4fmu_common/init.d/airframes/4073_ifo-s
+++ b/ROMFS/px4fmu_common/init.d/airframes/4073_ifo-s
@ -91,22 +91,22 @@ param set-default EKF2_OF_POS_Z -0.07
 # Failsafe
 param set-default COM_LOW_BAT_ACT 3

-param set-default PWM_MAIN_TIM0 -3
-
-# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
 param set-default CA_ROTOR3_KM -0.05

+param set-default PWM_MAIN_TIM0 -3
+
 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
 param set-default PWM_MAIN_FUNC3 103
 param set-default PWM_MAIN_FUNC4 104
+
--- a/ROMFS/px4fmu_common/init.d/airframes/4500_clover4
+++ b/ROMFS/px4fmu_common/init.d/airframes/4500_clover4
@ -27,17 +27,16 @@ param set-default MPC_XY_P 1.1
 param set-default MPC_Z_VEL_P_ACC 4.8
 param set-default MPC_Z_P 1.2

-# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
 param set-default CA_ROTOR3_KM -0.05

 param set-default PWM_MAIN_FUNC1 101
--- a/ROMFS/px4fmu_common/init.d/airframes/4900_crazyflie
+++ b/ROMFS/px4fmu_common/init.d/airframes/4900_crazyflie
@ -0,0 +1,91 @@
+#!/bin/sh
+#
+# @name Crazyflie 2
+#
+# @type Quadrotor x
+# @class Copter
+#
+# @maintainer Dennis Shtatov <densht@gmail.com>
+#
+# @board px4_fmu-v2 exclude
+# @board px4_fmu-v3 exclude
+# @board px4_fmu-v4 exclude
+# @board px4_fmu-v4pro exclude
+# @board px4_fmu-v5 exclude
+# @board px4_fmu-v5x exclude
+# @board diatone_mamba-f405-mk2 exclude
+#
+. ${R}etc/init.d/rc.mc_defaults
+
+param set-default BAT1_N_CELLS 1
+param set-default BAT1_CAPACITY 240
+param set-default BAT1_SOURCE 1
+
+param set-default CBRK_SUPPLY_CHK 894281
+param set-default COM_RC_IN_MODE 1
+
+param set-default EKF2_ABL_LIM 2
+param set-default EKF2_HGT_REF 2
+param set-default EKF2_RNG_CTRL 2
+param set-default EKF2_MAG_TYPE 1
+param set-default EKF2_OF_CTRL 1
+param set-default EKF2_OF_DELAY 10
+
+param set-default IMU_GYRO_CUTOFF 100
+param set-default IMU_ACCEL_CUTOFF 30
+
+param set-default MC_AIRMODE 1
+param set-default IMU_DGYRO_CUTOFF 70
+param set-default MC_PITCHRATE_D 0.002
+param set-default MC_PITCHRATE_P 0.07
+param set-default MC_ROLLRATE_D 0.002
+param set-default MC_ROLLRATE_P 0.07
+param set-default MC_YAW_P 3
+
+param set-default MPC_THR_HOVER 0.7
+param set-default MPC_Z_P 1.5
+param set-default MPC_Z_VEL_P_ACC 8
+param set-default MPC_Z_VEL_I_ACC 6
+param set-default MPC_HOLD_MAX_XY 0.1
+param set-default MPC_MAX_FLOW_HGT 3
+
+param set-default NAV_RCL_ACT 3
+
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.03
+param set-default CA_ROTOR0_PY 0.03
+param set-default CA_ROTOR1_PX -0.03
+param set-default CA_ROTOR1_PY 0.03
+param set-default CA_ROTOR1_KM -0.05
+param set-default CA_ROTOR2_PX -0.03
+param set-default CA_ROTOR2_PY -0.03
+param set-default CA_ROTOR3_PX 0.03
+param set-default CA_ROTOR3_PY -0.03
+param set-default CA_ROTOR3_KM -0.05
+
+# Run the motors at 328.125 kHz (recommended)
+param set-default PWM_MAIN_TIM0 3921
+param set-default PWM_MAIN_TIM1 3921
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+param set-default PWM_MAIN_DIS0 0
+param set-default PWM_MAIN_DIS1 0
+param set-default PWM_MAIN_DIS2 0
+param set-default PWM_MAIN_DIS3 0
+param set-default PWM_MAIN_MIN0 0
+param set-default PWM_MAIN_MIN1 0
+param set-default PWM_MAIN_MIN2 0
+param set-default PWM_MAIN_MIN3 0
+param set-default PWM_MAIN_MAX0 255
+param set-default PWM_MAIN_MAX1 255
+param set-default PWM_MAIN_MAX2 255
+param set-default PWM_MAIN_MAX3 255
+
+
+param set-default SENS_FLOW_MINRNG 0.05
+
+syslink start
+mavlink start -d /dev/bridge0 -b 57600 -m osd -r 40000
--- a/ROMFS/px4fmu_common/init.d/airframes/4901_crazyflie21
+++ b/ROMFS/px4fmu_common/init.d/airframes/4901_crazyflie21
@ -17,6 +17,7 @@
 #
 . ${R}etc/init.d/rc.mc_defaults

+
 param set-default SYS_MC_EST_GROUP 2
 param set-default SYS_HAS_MAG 0
 param set-default EKF2_OF_CTRL 1
@ -49,22 +50,22 @@ param set-default MPC_MAX_FLOW_HGT 3

 param set-default NAV_RCL_ACT 3

+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.03
+param set-default CA_ROTOR0_PY 0.03
+param set-default CA_ROTOR1_PX -0.03
+param set-default CA_ROTOR1_PY 0.03
+param set-default CA_ROTOR1_KM -0.05
+param set-default CA_ROTOR2_PX -0.03
+param set-default CA_ROTOR2_PY -0.03
+param set-default CA_ROTOR3_PX 0.03
+param set-default CA_ROTOR3_PY -0.03
+param set-default CA_ROTOR3_KM -0.05
+
 # Run the motors at 328.125 kHz (recommended)
 param set-default PWM_MAIN_TIM0 3921
 param set-default PWM_MAIN_TIM1 3921

-# Square quadrotor X clockwise numbering
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY 1
-param set-default CA_ROTOR1_KM -0.05
-param set-default CA_ROTOR2_PX -1
-param set-default CA_ROTOR2_PY -1
-param set-default CA_ROTOR3_PX 1
-param set-default CA_ROTOR3_PY -1
-param set-default CA_ROTOR3_KM -0.05
-
 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
 param set-default PWM_MAIN_FUNC3 103
--- a/ROMFS/px4fmu_common/init.d/airframes/50003_aion_robotics_r1_rover
+++ b/ROMFS/px4fmu_common/init.d/airframes/50003_aion_robotics_r1_rover
@ -11,15 +11,51 @@
 # @board bitcraze_crazyflie exclude
 #

-. ${R}etc/init.d/rc.rover_differential_defaults
+. ${R}etc/init.d/rc.rover_defaults

 param set-default BAT1_N_CELLS 4

 param set-default EKF2_GBIAS_INIT 0.01
 param set-default EKF2_ANGERR_INIT 0.01
+param set-default EKF2_MAG_TYPE 1
+
+param set-default FW_AIRSPD_MIN 0
+param set-default FW_AIRSPD_TRIM 1
+param set-default FW_AIRSPD_MAX 3
+
+param set-default GND_SP_CTRL_MODE 1
+param set-default GND_L1_DIST 5
+param set-default GND_L1_PERIOD 3
+param set-default GND_THR_CRUISE 0.7
+param set-default GND_THR_MAX 0.5
+
+# Because this is differential drive, it can make a turn with radius 0.
+# This corresponds to a turn angle of pi radians.
+# If a special case is made for differential-drive, this will need to change.
+param set-default GND_MAX_ANG 3.142
+param set-default GND_WHEEL_BASE 0.3
+
+# TODO: Set to -1.0, to allow reversing. This will require many changes in the codebase
+# to support negative throttle.
+param set-default GND_THR_MIN 0
+param set-default GND_SPEED_P 0.25
+param set-default GND_SPEED_I 3
+param set-default GND_SPEED_D 0.001
+param set-default GND_SPEED_IMAX 0.125
+param set-default GND_SPEED_THR_SC 1
+
+param set-default NAV_ACC_RAD 0.5
+
+# Differential drive acts like ackermann steering with a maximum turn angle of 180 degrees, or pi radians
+param set-default GND_MAX_ANG 3.1415

 # Set geometry & output configration
-param set-default RBCLW_ADDRESS 128
-param set-default RBCLW_FUNC1 101
-param set-default RBCLW_FUNC2 102
-param set-default RBCLW_REV 1 # reverse right wheels
+param set-default CA_AIRFRAME 6
+param set-default CA_R_REV 3
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_DIS1 1500
+param set-default PWM_MAIN_DIS2 1500
+param set-default PWM_MAIN_TIM0 50
+param set-default PWM_MAIN_TIM1 50
+
--- a/ROMFS/px4fmu_common/init.d/airframes/50004_nxpcup_car_dfrobot_gpx
+++ b/ROMFS/px4fmu_common/init.d/airframes/50004_nxpcup_car_dfrobot_gpx
@ -36,9 +36,9 @@ param set-default GND_THR_MAX 0.5
 param set-default GND_MAX_ANG 1.042
 param set-default GND_WHEEL_BASE 0.17

-# TODO: Set to -1, to allow reversing. This will require many changes in the codebase
+# TODO: Set to -1.0, to allow reversing. This will require many changes in the codebase
 # to support negative throttle.
-param set-default GND_THR_MIN 0
+param set-default GND_THR_MIN 0.0
 param set-default GND_SPEED_P 0.25
 param set-default GND_SPEED_I 3
 param set-default GND_SPEED_D 0.001
--- a/ROMFS/px4fmu_common/init.d/airframes/5001_quad_+
+++ b/ROMFS/px4fmu_common/init.d/airframes/5001_quad_+
@ -1,10 +1,12 @@
 #!/bin/sh
 #
-# @name Generic Quad + geometry
+# @name Generic 10" Quad + geometry
 #
 # @type Quadrotor +
 # @class Copter
 #
+# @maintainer Lorenz Meier <lorenz@px4.io>
+#
 # @board bitcraze_crazyflie exclude
 # @board px4_fmu-v2 exclude
 #
@ -12,17 +14,13 @@
 . ${R}etc/init.d/rc.mc_defaults

 param set-default CA_ROTOR_COUNT 4
-
-param set-default CA_ROTOR0_PX 0
-param set-default CA_ROTOR0_PY 1
-
-param set-default CA_ROTOR1_PX 0
-param set-default CA_ROTOR1_PY -1
-
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY 0
-param set-default CA_ROTOR2_KM -0.05
-
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 0
-param set-default CA_ROTOR3_KM -0.05
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR0_KM -0.05
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR1_KM -0.05
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
--- a/ROMFS/px4fmu_common/init.d/airframes/60000_uuv_generic
+++ b/ROMFS/px4fmu_common/init.d/airframes/60000_uuv_generic
@ -5,6 +5,8 @@
 # @type Underwater Robot
 # @class Underwater Robot
 #
+# @maintainer
+#
 # @board px4_fmu-v2 exclude
 # @board bitcraze_crazyflie exclude
 #
--- a/ROMFS/px4fmu_common/init.d/airframes/60001_uuv_hippocampus
+++ b/ROMFS/px4fmu_common/init.d/airframes/60001_uuv_hippocampus
@ -12,7 +12,38 @@
 #

 . ${R}etc/init.d/rc.uuv_defaults
-. ${R}etc/init.d/airframes/60000_uuv_generic
+
+param set-default CA_AIRFRAME 7
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_R_REV 255
+param set-default CA_ROTOR0_AX 1
+param set-default CA_ROTOR0_AY 0
+param set-default CA_ROTOR0_AZ 0
+param set-default CA_ROTOR0_KM 0
+param set-default CA_ROTOR0_PX 0
+param set-default CA_ROTOR0_PY -0.3
+param set-default CA_ROTOR0_PZ -0.3
+param set-default CA_ROTOR1_AX 1
+param set-default CA_ROTOR1_AY 0
+param set-default CA_ROTOR1_AZ 0
+param set-default CA_ROTOR1_KM 0
+param set-default CA_ROTOR1_PX 0
+param set-default CA_ROTOR1_PY 0.3
+param set-default CA_ROTOR1_PZ -0.3
+param set-default CA_ROTOR2_AX 1
+param set-default CA_ROTOR2_AY 0
+param set-default CA_ROTOR2_AZ 0
+param set-default CA_ROTOR2_KM 0
+param set-default CA_ROTOR2_PX 0
+param set-default CA_ROTOR2_PY 0.3
+param set-default CA_ROTOR2_PZ 0.3
+param set-default CA_ROTOR3_AX 1
+param set-default CA_ROTOR3_AY 0
+param set-default CA_ROTOR3_AZ 0
+param set-default CA_ROTOR3_KM 0
+param set-default CA_ROTOR3_PX 0
+param set-default CA_ROTOR3_PY -0.3
+param set-default CA_ROTOR3_PZ 0.3

 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
--- a/ROMFS/px4fmu_common/init.d/airframes/60002_uuv_bluerov2_heavy
+++ b/ROMFS/px4fmu_common/init.d/airframes/60002_uuv_bluerov2_heavy
@ -30,7 +30,7 @@ param set-default MAV_1_CONFIG 102

 param set-default BAT1_A_PER_V 37.8798
 param set-default BAT1_CAPACITY 18000
-param set-default BAT1_V_DIV 11
+param set-default BAT1_V_DIV 11.0
 param set-default BAT1_N_CELLS 4
 param set-default BAT_V_OFFS_CURR 0.33

@ -38,49 +38,49 @@ param set-default CA_AIRFRAME 7

 param set-default CA_ROTOR_COUNT 8
 param set-default CA_R_REV 255
-param set-default CA_ROTOR0_AX 1
-param set-default CA_ROTOR0_AY -1
-param set-default CA_ROTOR0_AZ 0
-param set-default CA_ROTOR0_KM 0
-param set-default CA_ROTOR0_PX 0.5
-param set-default CA_ROTOR0_PY 0.3
-param set-default CA_ROTOR0_PZ 0.2
-param set-default CA_ROTOR1_AX 1
-param set-default CA_ROTOR1_AY 1
-param set-default CA_ROTOR1_AZ 0
-param set-default CA_ROTOR1_KM 0
-param set-default CA_ROTOR1_PX 0.5
-param set-default CA_ROTOR1_PY -0.3
-param set-default CA_ROTOR1_PZ 0.2
-param set-default CA_ROTOR2_AX 1
-param set-default CA_ROTOR2_AY 1
-param set-default CA_ROTOR2_AZ 0
-param set-default CA_ROTOR2_KM 0
-param set-default CA_ROTOR2_PX -0.5
-param set-default CA_ROTOR2_PY 0.3
-param set-default CA_ROTOR2_PZ 0.2
-param set-default CA_ROTOR3_AX 1
-param set-default CA_ROTOR3_AY -1
-param set-default CA_ROTOR3_AZ 0
-param set-default CA_ROTOR3_KM 0
-param set-default CA_ROTOR3_PX -0.5
-param set-default CA_ROTOR3_PY -0.3
-param set-default CA_ROTOR3_PZ 0.2
-param set-default CA_ROTOR4_AZ -1
-param set-default CA_ROTOR4_KM 0
-param set-default CA_ROTOR4_PX 0.5
-param set-default CA_ROTOR4_PY 0.5
-param set-default CA_ROTOR5_AZ 1
-param set-default CA_ROTOR5_KM 0
-param set-default CA_ROTOR5_PX 0.5
-param set-default CA_ROTOR5_PY -0.5
-param set-default CA_ROTOR6_AZ 1
-param set-default CA_ROTOR6_KM 0
-param set-default CA_ROTOR6_PX -0.5
-param set-default CA_ROTOR6_PY 0.5
-param set-default CA_ROTOR7_KM 0
-param set-default CA_ROTOR7_PX -0.5
-param set-default CA_ROTOR7_PY -0.5
+param set-default CA_ROTOR0_AX 1.0000
+param set-default CA_ROTOR0_AY -1.0000
+param set-default CA_ROTOR0_AZ 0.0000
+param set-default CA_ROTOR0_KM 0.0000
+param set-default CA_ROTOR0_PX 0.5000
+param set-default CA_ROTOR0_PY 0.3000
+param set-default CA_ROTOR0_PZ 0.2000
+param set-default CA_ROTOR1_AX 1.0000
+param set-default CA_ROTOR1_AY 1.0000
+param set-default CA_ROTOR1_AZ 0.0000
+param set-default CA_ROTOR1_KM 0.0000
+param set-default CA_ROTOR1_PX 0.5000
+param set-default CA_ROTOR1_PY -0.3000
+param set-default CA_ROTOR1_PZ 0.2000
+param set-default CA_ROTOR2_AX 1.0000
+param set-default CA_ROTOR2_AY 1.0000
+param set-default CA_ROTOR2_AZ 0.0000
+param set-default CA_ROTOR2_KM 0.0000
+param set-default CA_ROTOR2_PX -0.5000
+param set-default CA_ROTOR2_PY 0.3000
+param set-default CA_ROTOR2_PZ 0.2000
+param set-default CA_ROTOR3_AX 1.0000
+param set-default CA_ROTOR3_AY -1.0000
+param set-default CA_ROTOR3_AZ 0.0000
+param set-default CA_ROTOR3_KM 0.0000
+param set-default CA_ROTOR3_PX -0.5000
+param set-default CA_ROTOR3_PY -0.3000
+param set-default CA_ROTOR3_PZ 0.2000
+param set-default CA_ROTOR4_AZ -1.0000
+param set-default CA_ROTOR4_KM 0.0000
+param set-default CA_ROTOR4_PX 0.5000
+param set-default CA_ROTOR4_PY 0.5000
+param set-default CA_ROTOR5_AZ 1.0000
+param set-default CA_ROTOR5_KM 0.0000
+param set-default CA_ROTOR5_PX 0.5000
+param set-default CA_ROTOR5_PY -0.5000
+param set-default CA_ROTOR6_AZ 1.0000
+param set-default CA_ROTOR6_KM 0.0000
+param set-default CA_ROTOR6_PX -0.5000
+param set-default CA_ROTOR6_PY 0.5000
+param set-default CA_ROTOR7_KM 0.0000
+param set-default CA_ROTOR7_PX -0.5000
+param set-default CA_ROTOR7_PY -0.5000

 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
--- a/ROMFS/px4fmu_common/init.d/airframes/6001_hexa_x
+++ b/ROMFS/px4fmu_common/init.d/airframes/6001_hexa_x
@ -16,10 +16,10 @@
 param set-default MAV_TYPE 13

 param set-default CA_ROTOR_COUNT 6
-param set-default CA_ROTOR0_PX 0
+param set-default CA_ROTOR0_PX 0.0
 param set-default CA_ROTOR0_PY 0.5
 param set-default CA_ROTOR0_KM -0.05
-param set-default CA_ROTOR1_PX 0
+param set-default CA_ROTOR1_PX 0.0
 param set-default CA_ROTOR1_PY -0.5
 param set-default CA_ROTOR2_PX 0.43
 param set-default CA_ROTOR2_PY -0.25
--- a/ROMFS/px4fmu_common/init.d/airframes/6002_draco_r
+++ b/ROMFS/px4fmu_common/init.d/airframes/6002_draco_r
@ -97,10 +97,10 @@ param set-default SER_TEL2_BAUD 921600


 param set-default CA_ROTOR_COUNT 6
-param set-default CA_ROTOR0_PX 0
+param set-default CA_ROTOR0_PX 0.0
 param set-default CA_ROTOR0_PY 0.5
 param set-default CA_ROTOR0_KM -0.05
-param set-default CA_ROTOR1_PX 0
+param set-default CA_ROTOR1_PX 0.0
 param set-default CA_ROTOR1_PY -0.5
 param set-default CA_ROTOR2_PX 0.43
 param set-default CA_ROTOR2_PY -0.25
--- a/ROMFS/px4fmu_common/init.d/airframes/7001_hexa_+
+++ b/ROMFS/px4fmu_common/init.d/airframes/7001_hexa_+
@ -17,10 +17,10 @@ param set-default MAV_TYPE 13

 param set-default CA_ROTOR_COUNT 6
 param set-default CA_ROTOR0_PX 0.5
-param set-default CA_ROTOR0_PY 0
+param set-default CA_ROTOR0_PY 0.0
 param set-default CA_ROTOR0_KM -0.05
 param set-default CA_ROTOR1_PX -0.5
-param set-default CA_ROTOR1_PY 0
+param set-default CA_ROTOR1_PY 0.0
 param set-default CA_ROTOR2_PX -0.25
 param set-default CA_ROTOR2_PY -0.43
 param set-default CA_ROTOR2_KM -0.05
--- a/ROMFS/px4fmu_common/init.d/airframes/CMakeLists.txt
+++ b/ROMFS/px4fmu_common/init.d/airframes/CMakeLists.txt
@ -32,127 +32,96 @@
 ############################################################################

 px4_add_romfs_files(
-	# [0-999] Reserved (historical)
+	# [0-999] Reserved (historical)"
+
+	# [1000, 1999] Simulation setups"
+	1001_rc_quad_x.hil
+	1002_standard_vtol.hil
+	1100_rc_quad_x_sih.hil
+	1101_rc_plane_sih.hil
+	1102_tailsitter_duo_sih.hil
+
+	# [2000, 2999] Standard planes"
+	2100_standard_plane
+	2106_albatross
+
+	2507_cloudship
+
+	# [3000, 3999] Flying wing"
+	3000_generic_wing
+
+	# [4000, 4999] Quadrotor x"
+	4001_quad_x
+	4014_s500
+	4015_holybro_s500
+	4016_holybro_px4vision
+	4017_nxp_hovergames
+	4019_x500_v2
+	4020_holybro_px4vision_v1_5
+	4040_reaper
+	4041_beta75x
+	4050_generic_250
+	4052_holybro_qav250
+	4053_holybro_kopis2
+	4061_atl_mantis_edu
+	4071_ifo
+	4073_ifo-s
+	4500_clover4
+	4900_crazyflie
+	4901_crazyflie21
+
+	# [5000, 5999] Quadrotor +"
+	5001_quad_+
+
+	# [6000, 6999] Hexarotor x"
+	6001_hexa_x
+	6002_draco_r
+
+	# [7000, 7999] Hexarotor +"
+	7001_hexa_+
+
+	# [8000, 8999] Octorotor +"
+	8001_octo_x
+
+	# [9000, 9999] Octorotor +"
+	9001_octo_+
+
+	# [11000, 11999] Hexa Cox
+	11001_hexa_cox
+
+	# [12000, 12999] Octo Cox
+	12001_octo_cox
+
+	# [13000, 13999] VTOL
+	13000_generic_vtol_standard
+	13100_generic_vtol_tiltrotor
+	13013_deltaquad
+	13014_vtol_babyshark
+	13030_generic_vtol_quad_tiltrotor
+	13200_generic_vtol_tailsitter
+
+	# [14000, 14999] MC with tilt
+	14001_generic_mc_with_tilt
+
+	16001_helicopter
+
+	# [17000, 17999] Autogyro
+	17002_TF-AutoG2
+	17003_TF-G2

 	# [18000, 18999] High-altitude balloons
 	18001_TF-B1

 	# [22000, 22999] Reserve for custom models
+
+	24001_dodeca_cox
+
+	50000_generic_ground_vehicle
+	50004_nxpcup_car_dfrobot_gpx
+	50003_aion_robotics_r1_rover
+
+	# [60000, 61000] (Unmanned) Underwater Robots
+	60000_uuv_generic
+	60001_uuv_hippocampus
+	60002_uuv_bluerov2_heavy
 )
-
-if(CONFIG_MODULES_SIMULATION_PWM_OUT_SIM)
-	px4_add_romfs_files(
-		# [1000, 1999] Simulation setups
-		1001_rc_quad_x.hil
-		1002_standard_vtol.hil
-		1100_rc_quad_x_sih.hil
-		1101_rc_plane_sih.hil
-		1102_tailsitter_duo_sih.hil
-	)
-endif()
-
-if(CONFIG_MODULES_MC_RATE_CONTROL)
-	px4_add_romfs_files(
-		# [4000, 4999] Quadrotor x
-		4001_quad_x
-		4014_s500
-		4015_holybro_s500
-		4016_holybro_px4vision
-		4017_nxp_hovergames
-		4019_x500_v2
-		4020_holybro_px4vision_v1_5
-		4041_beta75x
-		4050_generic_250
-		4052_holybro_qav250
-		4053_holybro_kopis2
-		4061_atl_mantis_edu
-		4071_ifo
-		4073_ifo-s
-		4500_clover4
-		4901_crazyflie21
-
-		# [5000, 5999] Quadrotor +
-		5001_quad_+
-
-		# [6000, 6999] Hexarotor x
-		6001_hexa_x
-		6002_draco_r
-
-		# [7000, 7999] Hexarotor +
-		7001_hexa_+
-
-		# [8000, 8999] Octorotor +
-		8001_octo_x
-
-		# [9000, 9999] Octorotor +
-		9001_octo_+
-
-		# [11000, 11999] Hexa Cox
-		11001_hexa_cox
-
-		# [12000, 12999] Octo Cox
-		12001_octo_cox
-
-		# [14000, 14999] MC with tilt
-		14001_generic_mc_with_tilt
-
-		16001_helicopter
-
-		24001_dodeca_cox
-	)
-endif()
-
-if(CONFIG_MODULES_FW_RATE_CONTROL)
-	px4_add_romfs_files(
-		# [2000, 2999] Standard planes
-		2100_standard_plane
-		2106_albatross
-
-		# [3000, 3999] Flying wing
-		3000_generic_wing
-
-		# [17000, 17999] Autogyro
-		17002_TF-AutoG2
-		17003_TF-G2
-	)
-endif()
-
-if(CONFIG_MODULES_AIRSHIP_ATT_CONTROL)
-	px4_add_romfs_files(
-		2507_cloudship
-	)
-endif()
-
-if(CONFIG_MODULES_VTOL_ATT_CONTROL)
-	px4_add_romfs_files(
-		# [13000, 13999] VTOL
-		13000_generic_vtol_standard
-		13100_generic_vtol_tiltrotor
-		13013_deltaquad
-		13014_vtol_babyshark
-		13030_generic_vtol_quad_tiltrotor
-		13200_generic_vtol_tailsitter
-	)
-endif()
-
-if(CONFIG_MODULES_ROVER_POS_CONTROL)
-	px4_add_romfs_files(
-		50000_generic_ground_vehicle
-		50004_nxpcup_car_dfrobot_gpx
-	)
-endif()
-
-if(CONFIG_MODULES_DIFFERENTIAL_DRIVE)
-	px4_add_romfs_files(
-		50003_aion_robotics_r1_rover
-	)
-endif()
-
-if(CONFIG_MODULES_UUV_ATT_CONTROL)
-	px4_add_romfs_files(
-		# [60000, 61000] (Unmanned) Underwater Robots
-		60000_uuv_generic
-		60001_uuv_hippocampus
-		60002_uuv_bluerov2_heavy
-	)
-endif()
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
bresch	e9b012fad9	[AUTO COMMIT] update change indication	2023-11-01 10:19:39 +00:00
bresch	5f02c21d73	ekf2: Compute stapdown INS propagation using closed-form solution	2023-10-31 18:42:22 +01:00