dark0707
/
px4-firmware
forked from Archive/PX4-Autopilot
1
0
Fork 0
Code Pull Requests Activity
35,559 Commits 514 Branches 136 Tags 234 MiB
Commit Graph

169 Commits

Author SHA1 Message Date
Ryan Johnston a1fa6a72ea
boards: MRO Control Zero H7 Board Support 2021-02-21 21:07:36 -05:00
Ryan Johnston 5376178987
boards: MRO Control Zero H7 OEM Board Support 2021-02-21 21:06:27 -05:00
Daniel Agar 414f9f81d9
move fake GPS to standalone module 2021-02-20 14:13:36 -05:00
Daniel Agar ab0d0fd0be
uORB move to PX4 platform layer 2021-02-17 11:25:56 -05:00
Daniel Agar e48a869160 boards: mRo pixracer pro disable USART6 (conflicts with SPI6) 2021-02-16 22:28:13 -05:00
Daniel Agar 2702306849 boards: mRo pixracer pro fix incorrect SPI2 sck 2021-02-16 22:28:13 -05:00
Daniel Agar fb2a199621 delete unmaintaned mkblctrl driver 2021-02-14 10:38:15 +01:00
Ryan Johnston 5a58f25d6a
boards: MRO Control Zero F7 OEM Support 2021-02-13 11:16:55 -05:00
Daniel Agar a257120e8d boards: use new param default mechanism 2021-02-12 08:27:47 -05:00
Daniel Agar 8f0918a16b boards: remove unused linker __param section 2021-02-08 23:22:48 -05:00
Daniel Agar a2442ffb48 board: enable UAVCAN sensors by default on F7/H7 2021-02-02 09:01:12 +01:00
Daniel Agar 78dff6adcb boards: add CONSTRAINED_MEMORY build option 
- currently the main change is that it reduces the max number of ORB multi instances to 4, but usage will be expanded as needed
 - limits number of EKF2 multi instances to 2.
 - enabled on all cortex m4 boards
 2021-02-01 08:56:22 +01:00
Daniel Agar 318c7e83b3 support up to PWM 14 
- generate PWM_MAIN 1-14
 - generate PWM_AUX 1-8
 - generate PWM_EXTRA 1-8
 - px4io and pwm_out directly read configuration parameters
    - only available and active physical outputs are actually shown for configuration
 - overall saves flash despite adding many new parameters
 2021-01-30 15:55:53 +01:00
Ryan Johnston d22eef9396
boards: mRo Control Zero F7 fix for voltage/current sensing 
* Rename GPIO_nVDD_BRICK1v to GPIO_VDD_BRICK1
 2021-01-19 15:48:17 -05:00
Ryan Johnston cea8ad4236 Control Zero F7 - RSSI Fix - SBUS Only/PPM Partial 
This fixes RSSI for the Control Zero F7 but I have noticed that while this works perfectly for SBUS receivers, for PPM receivers it does not decrease the RSSI visual value in QGC when removing the RC transmitter connection.

When a PPM receiver is connected and the connection is lost the autopilot goes into RC Scan Mode (in the RC Update Module) to determine what is connected (even though something already is connected).

The main issue with this is that PPM receivers don't go into RC Failsafe but I don't think it is an issue with this autopilot. It looks to be an issue with the RC Update Module and how it is handled at the module level for non I/O coprocessor autopilots. 


Tested with an X8R (SBUS) and a Dragonlink (PPM) as well as a Dragonlink set to SBUS as the output. SBUS worked as intended. See screenshots below.
 2021-01-19 20:42:28 +01:00
Daniel Agar 1ec10bfcc6
boards: disable CONFIG_ARMV7M_LAZYFPU again (#16573) 
- this was causing hard faults on the CUAV Nora and possibly other boards, disabling everywhere until we fully understand the root cause
 2021-01-17 22:40:21 -05:00
Daniel Agar 7f5fae91b0 boards: mro ctrl zero f7 fix default power module calibration 2021-01-12 16:51:05 -05:00
Daniel Agar cb74cb8692 boards: enable CONFIG_ARMV7M_LAZYFPU everywhere 2021-01-12 09:04:38 +01:00
Daniel Agar 763c3b8fda boards: start enabling multi-EKF by default on F7/H7 2021-01-10 17:56:34 +01:00
Daniel Agar 404f74f996 boards: mro/pixracerpro add flight_mode_manager 2020-12-30 10:25:08 -05:00
Matthias Grob 7545249215 Add flight_mode_manager to all targets with mc_pos_control 2020-12-30 10:25:08 -05:00
Daniel Agar 48da0055a1
boards: add initial mRo Pixracer Pro (M10064C) support 2020-12-27 12:12:15 -05:00
David Sidrane 22bc176885 Added mft for queries 2020-12-02 20:40:23 -05:00
David Sidrane 434f63d479 mro_x21: Use px4_platform_configure 2020-12-02 20:40:23 -05:00
David Sidrane 7c07ce9649 mro_x21-777: Use px4_platform_configure 2020-12-02 20:40:23 -05:00
David Sidrane 5703070974 mro_ctrl-zero-f7: Use px4_platform_configure 2020-12-02 20:40:23 -05:00
Daniel Agar c60743b306 boards: NuttX increase file name max 32 -> 40 2020-11-08 12:51:59 -05:00
Daniel Agar 233949a377 NuttX upgrade to 10.0.0+ defconfig changes 2020-10-28 14:25:25 -04:00
Daniel Agar 1bf0218c87 boards: mRo Control Zero F7 fix RC input and cleanup sensors init 2020-10-04 22:23:47 -04:00
Tanja Baumann b5ebdb8e41
add system command to get and set system time 
* add system_time command for all boards
 2020-09-26 13:09:01 -04:00
David Sidrane 00b4807443 mro_x21: Updates for NuttX 9.1.0+ External schedule_note 2020-09-16 21:32:04 -04:00
David Sidrane 4f5c88fc89 mro_x21-777: Updates for NuttX 9.1.0+ External schedule_note 2020-09-16 21:32:04 -04:00
David Sidrane 1e55ce0839 mro_ctrl-zero-f7: Updates for NuttX 9.1.0+ External schedule_note 2020-09-16 21:32:04 -04:00
David Sidrane aa1cb370e4 mro_x21 Updates for NuttX 9.1.0- 
mro_x21: defconfig MMCSD enable multiblock
 2020-09-16 21:32:04 -04:00
David Sidrane c9a323ebcc mro_x21-777 Updates for NuttX 9.1.0- 
mro_x21-777: defconfig MMCSD enable multiblock
 2020-09-16 21:32:04 -04:00
David Sidrane 2550d6f7c1 mro_ctrl-zero-f7 Updates for NuttX 9.1.0- 
mro_ctrl-zero-f7: defconfig MMCSD enable multiblock
 2020-09-16 21:32:04 -04:00
David Sidrane e8e463b875 cubepilot_cubeyellow Updates for NuttX 9.1.0- 
cubepilot_cubeyellow: defconfig MMCSD enable multiblock
 2020-09-16 21:32:04 -04:00
SalimTerryLi c037dbef21
Rename and move src/drivers/adc to src/drivers/adc/board_adc 2020-09-07 23:09:20 -04:00
Daniel Agar 2c3441aa90 boards: reduce CONFIG_NFILE_DESCRIPTORS 15 -> 12 
- reduced now that calibration uses uORB::Subscription
 - can likely be reduced further (perhaps < 8) with additional testing
 2020-08-21 10:12:13 -04:00
Daniel Agar fbc8e1b09e boards: mRo X2.1-777 fixes 
- ardupilot bootloader compatibility (first 3 sectors)
 - clock tree fixes
 - start mavlink
 - start mpu9250 magnetometer (only onboard mag)
 - fixes https://github.com/PX4/Firmware/issues/15466
 2020-08-09 14:24:49 -04:00
Daniel Agar e3d31a881e boards: NuttX disable posix message queues 2020-07-17 17:00:21 -04:00
Daniel Agar 13e34b32e6 new Bosch BMI088 IMU driver using FIFOs and DRDY 2020-06-11 12:25:13 -04:00
Daniel Agar 6f6efd60b7 boards: centralize optional external I2C sensor start 
- configured with new parameter SENS_EXT_I2C_PRB
 2020-06-10 09:04:13 -04:00
Daniel Agar 5e7d2e830d boards: delete old board.h boilerplate 2020-06-08 19:10:33 -04:00
Daniel Agar 5507c15bdc boards: move rgbled_pwm startup to appropriate boards 2020-06-08 16:49:46 -04:00
Daniel Agar d1c12ac7cf boards: mRo Control Zero fix IMU rotations 2020-06-04 11:34:31 -04:00
Daniel Agar 951969ba00
drivers/imu/invensense: new ICM20948 driver on SPI with AK09916 mag 2020-05-22 00:09:30 -04:00
Daniel Agar 746a8f5cf9 commander: reboot/shutdown usability fixes 
- always check with state machine before reboot/shutdown
 - respect BOARD_HAS_POWER_CONTROL (shutdown from command, low battery, power button)
 - px4_shutdown_request add optional delay and always execute from HPWORK
 - px4_shutdown_request split out px4_reboot_request
 2020-05-06 13:53:54 -04:00
Daniel Agar 28d2aca699 boards: include all procfs entries on boards that aren't flash constrained 2020-05-01 20:59:57 -04:00
Daniel Agar 8d0c92003a boards: remove all CONFIG_NXFONTS_DISABLE* 2020-05-01 20:59:57 -04:00
Daniel Agar 06478d9997 delete obsolete SENSORIOCSPOLLRATE/SENSORIOCRESET and systemcmds/config 2020-04-15 23:33:41 -04:00
mcsauder 6548fde024 Whitespace cleanup to quiet new blank line at EOF git hook. 2020-04-15 23:00:39 -04:00
Daniel Agar 1ac6230758 boards: always change default IMU_GYRO_RATEMAX on px4_fmu-v2/v3 and mro_x21 
- this can lower cpu usage considerably on older boards
 2020-04-15 21:52:02 -04:00
Daniel Agar 66eacd24bc
px4_fmu-v5_stackcheck: update stack sizes and add to Jenkins 
- increase stack sizes to run cleanly under stackcheck
     - this is likely overkill for most boards, but using stackcheck to set our minimum ensures we have a very safe margin on regular builds and it's something we can currently afford
 - remove holybro_durandal-v1_stackcheck from test rack (there's only one unit)
 2020-04-11 21:16:10 -04:00
Daniel Agar a89bba470a boards: STM32F76xxx/STM32F77xxx linker add ITCM RAM and .ramfuncs handling 
- this doesn't currently change anything, but gets us ready to start
experimenting with using the small amount of instruction tightly memory
on STM32F7
 - the .ramfuncs section works with NuttX CONFIG_ARCH_RAMFUNCS
 2020-04-08 13:20:54 -04:00
Daniel Agar 7aa7f0ed95 switch remaining boards to new InvenSense IMU drivers 2020-04-07 09:59:12 -04:00
Daniel Agar ad559a66a1 examples: add simple work_item example module 2020-04-06 09:43:55 -04:00
Daniel Agar 40b1043e12 NuttX boards minor lpwork and init stack increases 2020-04-02 23:39:17 -04:00
Daniel Agar 15332a7e56 boards: reduce CONFIG_NFILE_DESCRIPTORS 20 -> 15 2020-04-01 16:17:14 -04:00
Daniel Agar 7c8ab49eb9 boards: mro_ctrl-zero-f7 fix i2c 
- STM32_HSI_FREQUENCY 24 MHz -> 16 MHz (required for NuttX stm32f7 i2c)
 2020-04-01 14:27:33 -04:00
Daniel Agar ca81175b07 rename drivers/px4fmu -> drivers/pwm_out 
- split out header
 2020-03-31 19:12:31 -04:00
Daniel Agar 44bec269b0 boards: update all NuttX configs CONFIG_NSH_MAXARGUMENTS 12 -> 15 2020-03-25 17:59:22 -04:00
Daniel Agar f5fe50f839 invensense/icm20608g driver minor improvements 
- interupt pin set active low and latch
 - relax retry timeout if configure failed
 - improve configured empty rate (sample rate) rounding
 - fix RegisterCheck
 - check FIFO count as part of full transfer and reset or adjust timing if necessary
 - rename DRV_IMU_DEVTYPE_ICM20608 -> DRV_IMU_DEVTYPE_ICM20608G
 2020-03-25 01:05:38 -04:00
Beat Küng b156fe5787 boards: remove deprecated SPI + I2C defines from board_config.h 
chip-selects are deselected in stm32_spiinitialize()
 2020-03-24 09:46:20 -04:00
Beat Küng c4a19c8852 refactor icm20689: use driver base class 2020-03-24 09:46:20 -04:00
Beat Küng 54da4997ad refactor bmi088: use driver base class 2020-03-24 09:46:20 -04:00
Beat Küng 7626be0485 refactor mpu9250: use driver base class 2020-03-24 09:46:20 -04:00
Daniel Agar 8738c26426
boards: enable NuttX SPI DMA buffers 
- update to NuttX with stm32f4 and stm32f7 SPI DMA internal buffers
 - remove explicit DMA buffer allocations from new IMU drivers
 - restore original BOARD_DMA_ALLOC_POOL_SIZE
 - decrease SPI DMA thresholds based on fmu-v2/v3/v4/v5 bench testing
 2020-03-22 19:24:26 -04:00
Beat Küng 8ebde51648 refactor hmc5883: use driver base class 
Removes the calibration on startup, as these values were overwritten by
the system calibration values anyway.
So the only difference is that if all calibration scales were equal to 1,
the driver startup would have failed.
 2020-03-17 23:31:17 -04:00
Beat Küng 969a77f889 refactor mpu6000: use driver base class 2020-03-17 23:31:17 -04:00
Beat Küng be0a205438 refactor ist8310: use driver base class 2020-03-17 23:31:17 -04:00
Daniel Agar 0ce9e113ff boards: stm32f4/f7 enable SPI_DMATHRESHOLD=32 2020-03-11 22:08:37 -04:00
Beat Küng 179c89b6bd board configs: extend board_dma_map.h with a table 2020-03-11 22:08:37 -04:00
Daniel Agar 8c2ba5f39f mro_x21-777: add board_dma_map.h and enable SPI1 DMA 2020-03-11 22:08:37 -04:00
Daniel Agar 38a10fc7fc mro_x21: add board_dma_map.h and enable SPI1 DMA 2020-03-11 22:08:37 -04:00
Daniel Agar f309e3a5ba mro_ctrl-zero-f7: add board_dma_map.h and enable SPI1/SPI5 DMA 2020-03-11 22:08:37 -04:00
Daniel Agar f9794e99f8
move hover_thrust_estimator to new module (mc_hover_thrust_estimator) 
* MC_HTE: unitialize with hover_thrust parameter
* MC_HTE: constrain hover thrust setter between 0.1 and 0.9
* MC_HTE: integrate with land detector and velocity controller
* MCHoverThrustEstimator: Always publish an estimate even when not fusing measurements. This is required as the land detector and the position controller need to receive a hover thrust value.

* MC_HTE: use altitude agl threshold to start the estimator
local_position.z is relative to the origin of the EKF while dist_bottom
is above ground

Co-authored-by: bresch <brescianimathieu@gmail.com>
 2020-03-11 21:20:54 -04:00
Daniel Agar 46a09b711f boards: increase STDIO buffer size where we can afford it 2020-03-11 17:19:44 -04:00
Daniel Agar 505afc6063 boards: increase LPWORKSTACKSIZE 1536 -> 1600 2020-03-10 12:53:01 -04:00
Beat Küng 335623e11d SPI config: use enum to specify bus 2020-03-10 10:11:43 -04:00
Beat Küng b54e5a1c23 param: automatically update calibration ID params on import 
This avoids the need for recalibration, and also cleans up other driver
ID's (merge separate accel/gyro).

The SPI address was previously set to a board-specific (arbitrary) value,
and is now set to 0. This will allow extending for multiple sensors of the
same type on the same bus.
 2020-03-10 10:11:43 -04:00
Beat Küng 1851665fab boards: add new spi+i2c config 
Chip-select and SPI initialization uses the new config, whereas the drivers
still use the existing defines.

The configuration in board_config.h can be removed after all drivers are
updated.
 2020-03-10 10:11:43 -04:00
Daniel Agar 4698a09b98 delete unmaintained outback challenge (OBC) bottle drop example 2020-03-05 14:09:31 -05:00
Beat Küng d74d094940 nuttx configs: disable nuttx timers which are used for PWM output 
These are not required, and to be consistent we enforce disabling them now.
 2020-02-13 03:49:16 -08:00
Beat Küng 03210f5386 mro/x21: use hw description methods for timer configuration 2020-02-13 03:49:16 -08:00
Beat Küng bd3fe62fcf mro/x21-777: use hw description methods for timer configuration 2020-02-13 03:49:16 -08:00
Beat Küng b3fe4a6691 mro/ctrl-zero-f7: use hw description methods for timer configuration 2020-02-13 03:49:16 -08:00
Beat Küng 62b4f3487a io timer: remove some fields from io_timers_t and split out channel indexes 
- reduces amount of board configuration required
- removes the cyclic dependency between io_timers_t and timer_io_channels_t

Fixes a bug in the fmuk66-v3 config: the 2. timer has 3 channels associated
not 2.
Fixes a bug in the modelai config: the 2. timer has 4 channels associated.
 2020-02-13 03:49:16 -08:00
Beat Küng b399698306 ist8310: remove calibration code 
- it does nothing useful
- increases boot time by 2 seconds on pixhawk 4 due to a poll timeout:
IST8310 on I2C bus 3 at 0x0e (bus: 100 KHz, max: 400 KHz)
WARN  [ist8310] ERROR: TIMEOUT 2
 2020-02-06 12:39:39 -05:00
Daniel Agar 036a45377d boards rename auav_x21 -> mro_x21 2020-01-22 15:33:02 -05:00
Daniel Agar 693d532bba
mRo x2.1 777 board support 2020-01-22 15:02:55 -05:00
Daniel Agar dc05ceaad2
create temperature_compensation module 
- this is a new module for temperature compensation that consolidates the functionality previously handled in the sensors module (calculating runtime thermal corrections) and the events module (online thermal calibration)
 - by collecting this functionality into a single module we can optionally disable it on systems where it's not used and save some flash (if disabled at build time) or memory (disabled at run time)
 2020-01-20 21:42:42 -05:00
David Sidrane 4e04781d1f mro_ctrl-zero-f7:Support Nuttx SDIO Fixes 2020-01-08 12:23:01 -05:00
Daniel Agar 9b66cbd2d9 Infineon DPS310 Barometer 
- used as the primary barometer on the mRo Control Zero F7
 2019-12-02 00:51:01 -05:00
Daniel Agar fd72e5e795 mRo ctrl zero updates 
- add ICM20602 and ICM20648 data ready interrupts
 - enable Bosch BMI088 IMU
 - move HRT_TIMER to TIM3 (same timer as PPM channel)
 2019-12-01 17:43:15 -05:00
Daniel Agar bc182e94e6
sensors split rc_update into new standalone module 2019-11-24 13:25:11 -05:00
Daniel Agar 5aaf1b100b delete unused md25 driver 2019-11-21 18:56:24 -05:00
Daniel Agar 8c38176d77 boards: alphabetize and sync common drivers and modules 2019-11-21 18:56:24 -05:00
Daniel Agar 84fe64b1c2
create new multicopter rate controller module (mc_rate_control) split out of mc_att_control 2019-11-19 17:03:11 -05:00
Daniel Agar 99aae8b891 NuttX use toolchain math.h and avoid empty drivers/Kconfig 2019-11-16 11:43:42 +01:00