Commit Graph

42894 Commits

Author SHA1 Message Date
Matthias Grob 0200ef9a60
Tools/auterion: add Skynode upload scripts (#21842) 2023-08-21 08:03:07 +02:00
Peter van der Perk 068b1494fc ucans32K146: fix pwm startup 2023-08-18 12:38:50 -04:00
bresch dbebe7d168 fw-atune: use same attitude P rule as for multirotors
The current rule was producing too high gains. Also constrain the value
using the prameter's limits.
2023-08-18 11:48:08 -04:00
bresch 759f91ba52 fw-atune: limit max test signal
Whe the P gain is high, the test signal is large too. However, it should
not exceed what is allowed from the max rate parameter.
2023-08-18 11:48:08 -04:00
Mathieu Bresciani 74a54b3b12
EKF2: improve resilience against incorrect mag data
- when GNSS is used require low mag heading innovations during
  horizontal acceleration (yaw observable) to validate the mag
- only fuse mag heading just enough to constrain the yaw estimate
  variance to a sane value. Leave enough uncertainty to allow for a
  correction when the yaw is observable through GNSS fusion
2023-08-17 09:55:15 -04:00
Silvan Fuhrer eaad11bb74 ActuatorEffectiveness: add comment for 2% magic number to stop motors
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2023-08-17 13:28:09 +02:00
Alex Klimaj 0914e7feaa
new TDK IIM42653 IMU driver and ARKV6X Rev 2 2023-08-16 16:20:14 -04:00
Ludovic Vanasse 3a166247c1 Add condition for Iridium mode to not send params change after a time
In the mavlink_receiver code, after a while it will try to resend some
parameter update through the MAVLink instance. But for Iridium links
those are not a good idea. So this adds a condition that prevent the
sending if the MAVLink instance is in Iridium mode.

Related to issue #21496
2023-08-16 11:28:36 -04:00
Sverre Velten Rothmund b21ad6af14 multiple: Fix abs(int) usage on float values 2023-08-15 10:18:32 +02:00
alexklimaj 5f9443add4 ARK Jetson Carrier support 3rd power module 2023-08-14 10:41:44 -04:00
PX4 BuildBot 4fce159a2a Update submodule mavlink to latest Fri Aug 11 12:38:42 UTC 2023
- mavlink in PX4/Firmware (594d7743bab98001866a2f34e1cc835d5795fb3a): e04677782a
    - mavlink current upstream: 58435f6a83
    - Changes: e04677782a...58435f6a83

    58435f6a 2023-08-09 Hamish Willee - development.xml - remove mission_checksum (#2010)
048237b4 2023-08-02 Hamish Willee - Update Pymavlink - for Ava etc (#2025)
2023-08-11 09:48:45 -04:00
PX4 BuildBot cd015d30c8 update all px4board kconfig 2023-08-11 08:59:37 -04:00
PX4 BuildBot 28a34ef56c Update world_magnetic_model to latest Fri Aug 11 11:14:05 UTC 2023 2023-08-11 08:58:57 -04:00
Ville Juven 0cae33bf47 blockingqueue.hpp: Fix sem_wait not blocking if task is signaled
sem_wait() can be interrupted if the task receives a signal, however
the blockinglist implementation depends on blocking until the semaphore
can be obtained.
2023-08-11 07:44:10 +02:00
Jukka Laitinen c0084ab24d Fix maximum rotation value in GetBoardRotation()
Fix a memory overflow in case SENS_BOARD_ROT is set to Rotation::ROTATION_MAX (41) which is not a valid value

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
2023-08-10 07:54:53 +02:00
Beat Küng ae70f9c640 attitude_estimator_q: disable ATT_ACC_COMP by default
Improves tracking in the CI test, and I always disabled it on my vehicles
as well.
2023-08-08 12:28:52 -04:00
Beat Küng 57297234e2 autopilot_tester: slower descend for fly_forward_in_offboard_attitude
As CI was sometimes failing
2023-08-08 12:28:52 -04:00
bresch 1f02d55103 ekf2: update change indicator
change caused by fixing the yaw variance increase calculation
2023-08-08 12:09:56 -04:00
bresch 39a83ab138 ekf2_test: test yaw variance after reset 2023-08-08 12:09:56 -04:00
bresch b6fb95247b ekf2_derivation: fix typo 2023-08-08 12:09:56 -04:00
bresch de702a2e63 ekf2: fix function to increase yaw variance 2023-08-08 12:09:56 -04:00
bresch 01fc4c3cf1 SquareMatrix: add functions to copy upper and lower triangle 2023-08-08 12:09:56 -04:00
Silvan Fuhrer 56dd1dc930
Navigator: Resume mission with last flight speed (#21714)
* Navigator: DO_CHANGE_SPEED: only store sinlge cruising_speed_current_mode

This stored cruising speed setpoint is reset on mode change and
after a VTOL transition.

* Navigator Mission: replay DO_CHANGE_SPEED items when resuming mission

* Navigator: remove cruising_speed_sp_update()

Speed changes in a mission are handled directly in the position controllers,
and no longer in Navigator.

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>

---------

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2023-08-08 13:22:05 +02:00
Beat Küng 02a6640000 fix uxrce_dds_client: apparently we cannot use the upper 4 bits for ID's 2023-08-08 10:59:34 +02:00
hskrieg 64c21ad428 uorb: allow for more than 255 uORB messages
Increased size for ORB_ID from uint8_t to uint16_t

Created a type: orb_id_size_t = uint16_t.
There are still a couple of places where the size
of the ORB_ID is assumed to be less than 16-bits.
The places that I have found are commented regarding
this and can be found with a search on orb_id_size_t.
2023-08-08 10:59:34 +02:00
Christian Rauch e9fbb9a3ab pca9685_pwm_out: add parameter PCA9685_RATE to set update frequency 2023-08-07 20:44:07 -04:00
Christian Rauch dce7149363 remove unused debug.h 2023-08-07 20:42:58 -04:00
Christian Rauch cab78593b4 BMI0xx: remove unused board_dma_alloc.h 2023-08-07 20:42:58 -04:00
Christian Rauch 638b18dd07 ADIS16497: replace NuttX specific up_udelay with HAL version px4_udelay 2023-08-07 20:42:58 -04:00
Christian Rauch b689082d97 enable common barometer, IMU and magnetometer 2023-08-07 20:42:58 -04:00
Christian Rauch a128517897 skip SSH key check for simpler builds in the Docker container 2023-08-07 20:42:58 -04:00
Dusan Zivkovic 29f352d49d px4-rc.simulator: set Gazebo coordinate frame reference (SIM_GZ_HOME_* params) from PX4_HOME_* env variables 2023-08-07 14:41:35 -04:00
bresch cd77d52dc1 ekf2: calcRotVecVariances using SymForce 2023-08-07 14:28:06 -04:00
Beat Küng 2d09ad55e3 omnibus/f4sd: disable urxce_dds_client and enable tools & load_mon 2023-08-04 11:27:31 -04:00
Beat Küng 0277a6486f mavsdk_tests: add offboard attitude test & run with Q estimator 2023-08-04 11:27:31 -04:00
Daniel Agar d75bb62a65
ekf2: separate mag and mag heading control logic (#21212)
- split mag_3d into new standalone mag fusion and mag fusion allowed to update all states (full mag_3d)
 - new dedicated control logic for mag/mag_3d fusion and standalone mag heading fusion
 - if WMM available use for mag_I and mag_B init
 - mag states reset if external yaw reset (yaw estimator, GPS yaw, etc)
 - mag reset if declination changed (eliminate _mag_yaw_reset_req)
 - mag fusion (but not mag_hdg or mag_3d) can be active during gps_yaw or ev_yaw (if yaw aligned north)

Co-authored-by: bresch <brescianimathieu@gmail.com>
2023-08-04 10:39:16 -04:00
alexklimaj 7db667558e ARK RTK GPS support baro on I2C bus 1 instead of 2 2023-08-03 20:48:01 -04:00
Roman Dvorak 1feb79f27f update gps submodule 2023-08-03 10:27:34 -04:00
Daniel Agar 95b3005679
lib/world_magnetic_model: add constants for min/max/mean/median field strength
- add geo_magnetic_tables.hpp comments for blackout zone warnings
 - reduce unnecessary precision in generated tests (should reduce future update noise)
 - update copyright year
2023-07-28 17:14:25 -04:00
Daniel Agar 88e7452492
commander: collapse ArmStateMachine and simplify
- simplify vehicle_status.arming_state down to just armed and disarmed
    - ARMING_STATE_INIT doesn't matter
    - ARMING_STATE_STANDBY is effectively pre_flight_checks_pass
    - ARMING_STATE_STANDBY_ERROR not needed
    - ARMING_STATE_SHUTDOWN effectively not used (all the poweroff/shutdown calls loop forever in place)
    - ARMING_STATE_IN_AIR_RESTORE doesn't exist anymore
 - collapse ArmStateMachine into commander
     - all requests already go through Commander::arm() and Commander::dismarm()
 - other minor changes
     - VEHICLE_CMD_DO_FLIGHTTERMINATION undocumented (unused?) test command (param1 > 1.5f) removed
     - switching to NAVIGATION_STATE_TERMINATION triggers parachute command centrally (only if armed)

---------

Co-authored-by: Matthias Grob <maetugr@gmail.com>
2023-07-28 17:12:01 -04:00
Daniel Agar 84b6b472b4
ekf2: change delta angle and delta velocity bias states to accel and gyro bias (#21901)
* ekf2-test: remove outdated codegen comparison

The definition of states changed so the comparison with the old
derivation cannot work anymore.

---------

Co-authored-by: bresch <brescianimathieu@gmail.com>
2023-07-28 09:31:44 -04:00
Daniel Agar 444e5d2d4a boards: px4_fmu-v5_debug readd systemcmds/sd_stress 2023-07-27 14:48:41 -04:00
Silvan Fuhrer c0d9e2ac7a
commander: add warning for imminent navigation failure
Some system are able to dead-reckon for a while after losing GPS or
other sources providing positional feedback. If the estimated position
error grows above the failsafe threshold, the system enters a failsafe
mode. As the position error estimate is growing linerly over time, and
it is recommended to take action before entering the failsafe, we here
warn the user about the imminent failsafe and propose to take manual
control.

---------

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2023-07-27 14:12:04 -04:00
PX4 BuildBot 5f94eb1493 Update submodule sitl_gazebo-classic to latest Thu Jul 27 12:39:07 UTC 2023
- sitl_gazebo-classic in PX4/Firmware (1c1f8da7d9): c8ac7ff39b
    - sitl_gazebo-classic current upstream: 20ded0757b
    - Changes: c8ac7ff39b...20ded0757b

    20ded07 2023-07-21 Silvan Fuhrer - wind pluging: fix wind ramp (#998)
6620a6b 2023-07-20 Silvan Fuhrer - wind plugin: add option to simulate a constant wind change with ramp up (#996)
2023-07-27 12:58:59 -04:00
Julian Oes 42bdfe0fb2
boards: px4/fmu-v5 move some test commands to test config
I would expect anyone using these test commands can just use the test config instead.

Signed-off-by: Julian Oes <julian@oes.ch>
2023-07-27 10:36:03 -04:00
Daniel Agar e468798e91
Update world_magnetic_model to latest Thu Jul 27 11:14:06 UTC 2023
Co-authored-by: PX4 BuildBot <bot@px4.io>
2023-07-27 10:34:11 -04:00
Daniel Agar d928a3a8d0
Update submodule GPSDrivers to latest Thu Jul 27 12:39:18 UTC 2023 (#21897)
- GPSDrivers in PX4/Firmware (9762316d8a0a84b5cb8563ab4c289416421d2801): 261480cb78
    - GPSDrivers current upstream: b94378bcbb
    - Changes: 261480cb78...b94378bcbb

    b94378b 2023-07-26 Eric Katzfey - Fixing UBlox M10 support

Co-authored-by: PX4 BuildBot <bot@px4.io>
2023-07-27 10:33:22 -04:00
PX4 BuildBot 37a6ac5c93 Update submodule mavlink to latest Thu Jul 27 12:39:22 UTC 2023
- mavlink in PX4/Firmware (3476e500bf5baa837314e09ff29deeabb719071b): e47dfbb4b7
    - mavlink current upstream: e04677782a
    - Changes: e47dfbb4b7...e04677782a

    e0467778 2023-07-27 JaeyoungLim - Clarify SET_ATTITUDE_TARGET quaternion field (#2020)
2023-07-27 10:32:27 -04:00
PX4 BuildBot a3a19da651 update all px4board kconfig 2023-07-27 10:24:10 -04:00
Beat Küng 351a9050c3 commander: update param description for COM_MOT_TEST_EN 2023-07-27 09:39:24 -04:00