Commit Graph

38522 Commits

Author SHA1 Message Date
bresch bf2fb70d67 vehicleIMU: compute and log accel variance 2021-11-05 09:45:52 -04:00
Silvan Fuhrer f02786d112 Navigator/Commander: make GPS failsafe consitent: switch to Descend also for FW and VTOL
- remove GPS failsafe mode
- for VTOL: transition to hover in Descend (unless NAV_FORCE_VT is not set)

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2021-11-05 12:09:39 +03:00
Silvan Fuhrer b77487d69c Fixed-wing Position controller: add modes for auto altitude and auto descend
- bit of clean up
- add GPS failsafe mode auto_altitude, that will keep current altitude with a fixed-bank angle
for some time, then switches to auto_descend that will descend with constant sink rate
of 0.5m/s
- params controlling GPS failsafe are not FW params: NAV_GPSF_R --> FW_GPSF_R and
NAV_GPSF_LT --> FW_GPSF_LT

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2021-11-05 12:09:39 +03:00
Daniel Agar c73a1b4c68 update UAVCAN-v0 dsdl to DroneCAN 2021-11-04 21:36:13 -04:00
Daniel Agar 67437396f1 mpu6000: add USER_CTRL I2C_MST_EN bit to checked registers 2021-11-04 21:22:14 -04:00
Daniel Agar 8fbb241c2e mpu6000: add gyro/accel self test bits to checked registers 2021-11-04 21:22:14 -04:00
Daniel Agar bffcdd6fad boards: modalai_fc-v2 fix bootloader board type 2021-11-04 15:43:29 -04:00
Matthias Grob f55590ce78 FlightTaskOrbit: remove duplicate newlines 2021-11-03 17:37:52 +01:00
Matthias Grob 6cea707330 FlightTaskOrbit: increase acceptance radius from 1 to 2m
to avoid reaproaching when tracking is not perfect while
acc/deccelerating by stick.
2021-11-03 17:37:52 +01:00
Matthias Grob eda9dce033 FlightTaskOrbit: fix direction change via MAVLink command 2021-11-03 17:37:52 +01:00
Thomas Debrunner d450afead6 FlightTaskOrbit: Direct orbit approach with slowdown at intersection point 2021-11-03 17:37:52 +01:00
Thomas Debrunner 0d0b87e193 Update src/modules/flight_mode_manager/tasks/Orbit/FlightTaskOrbit.cpp
Co-authored-by: Mathieu Bresciani <brescianimathieu@gmail.com>
2021-11-03 17:37:52 +01:00
Thomas Debrunner 9bd46be124 Orbit: Switch to PositionSmoothing library.
This also fixes the bug with altitude not follows and smoothes orbit approach trajectory
2021-11-03 17:37:52 +01:00
Vatsal Asitkumar Joshi ea1ae73526
Support for Raspberry PI RP2040 MCU (#18083) 2021-11-03 12:14:30 -04:00
Daniel Agar 8f6fd5f37b sensors/vehicle_angular_velocity: gyro RPM dynamic notch filter handle negative RPM
- some UAVCAN ESCs report negative RPM for reverse rotation
 - lower hard coded safety limit RPM limit to 10 Hz (600 RPM)
 - avoid disabling notch filters that weren't configured
2021-11-02 09:36:02 -04:00
Peter van der Perk c6f249f7f1 Kconfig merge_config only set to 'n' when BOOL
Run make updateconfig to fix delta's of derived configs
2021-11-02 09:34:21 -04:00
Daniel Agar fec0d6c5ed ekf2: change indication further reduce data precision 2021-11-02 10:21:54 +01:00
bresch 1317b1a6e1 [AUTO COMMIT] update change indication 2021-11-01 13:59:34 +01:00
bresch 9e54c6d1aa ekf2: move generic functions to control.cpp
these functions aren't specific to GPS fusion
2021-11-01 13:59:34 +01:00
bresch e90734881b ekf2_test: add more GPS fusion control tests 2021-11-01 13:59:34 +01:00
bresch 8aae39e82a ekf2: move GPS control logic to separate source file 2021-11-01 13:59:34 +01:00
bresch 689ab12845 ekf2: refactor gps vel/pos fusion control logic 2021-11-01 13:59:34 +01:00
bresch 9afc390552 ekf2: move gps yaw reset in starting function 2021-11-01 13:59:34 +01:00
Daniel Agar 1461eb0e32 logger: increase optimization to ${MAX_CUSTOM_OPT_LEVEL}
- ${MAX_CUSTOM_OPT_LEVEL} is -O2 on boards that aren't flash constrained
2021-11-01 09:13:12 +01:00
Thomas Debrunner 32be88404a
commander: Only run estimator navigation checks when armed 2021-10-28 12:06:31 -04:00
PX4 BuildBot 7006b0aee9 Update submodule jMAVSim to latest Thu Oct 28 12:38:55 UTC 2021
- jMAVSim in PX4/Firmware (c9b89ee869): 0a5a8c6d9d
    - jMAVSim current upstream: b23dc53d55
    - Changes: 0a5a8c6d9d...b23dc53d55

    b23dc53 2021-10-08 Ilya Petrov - Use low resolution texture also on Windows
2021-10-28 11:41:02 -04:00
Harrison MG c9b89ee869 fixed ulanding_radar autostart command 2021-10-28 00:01:37 -04:00
Daniel Agar be5c5856e7 cmake: px4_add_module always add module to PX4_MODULE_PATHS so that parameters aren't pruned 2021-10-27 23:00:40 -04:00
Peter van der Perk 51abb804ac UAVCANv1 Fix NodeClient header and Kconfig merge logic 2021-10-27 10:07:01 -04:00
Beat Küng 0decdb1c7b github action: run ./Tools/generate_board_targets_json.py in container
As it requires kconfiglib
2021-10-27 15:23:23 +02:00
Silvan Fuhrer e715e6c245 Fixed-wing position control: set yaw_sp to yaw_current instead of nav_bearing when not controlled
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2021-10-27 14:35:00 +03:00
Silvan Fuhrer b53808d11b fixed-wing: set yaw_sp to yaw_current instead of 0 when not controlled
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2021-10-27 14:35:00 +03:00
Silvan Fuhrer da4d6dc657 L1: increase the max allowed tangential velocity in the opposite direction to 2m/s
There is logic in L1 that prevents the vehicle from trying to achieve
an impossible loiter entry (e.g. due to wind). That check makes the
vehicle track the loiter center if the tangential velocity is in the wrong
direction while loitering. After the vehicle flies through the center, it can
then turn the other way around to join the loiter.
This check is though too sensitive if it purely checks for the wrong direction,
and it can end in delayed loiter entry for no reason.
This commit increases the threshold to 2m/s of tangential velocity
in the wrong direction to trigger the check.

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2021-10-27 12:32:58 +03:00
RomanBapst eee5f501cd navigator: fix flyaway when altitude change is commanded without a valid
triplet

Signed-off-by: RomanBapst <bapstroman@gmail.com>
2021-10-27 11:01:13 +03:00
RomanBapst bf6a47ba6a navigator: cleanup of set_loiter_item
Unwraps the set_loiter_item() to solve the issue where the altitdue setpoint
in a MC takeoff wasn't correctly used.

Signed-off-by: RomanBapst <bapstroman@gmail.com>
2021-10-27 11:01:13 +03:00
Silvan Fuhrer cb78ba34d7 Mission: for tangential loiter exit, set current position setpoint typ to position
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2021-10-27 11:01:13 +03:00
Silvan Fuhrer 4b21c0c49e Fw Pos C: always reset pos_sp type from LOITER to POSITION if far away
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2021-10-27 11:01:13 +03:00
RomanBapst d678e792cc mission_block: don't require an exiting heading when loitering if the next
waypoint is within the loiter radius of the current waypoint

Signed-off-by: RomanBapst <bapstroman@gmail.com>
2021-10-27 11:01:13 +03:00
Michael Schaeuble 5e1f62e9d0 Add option to warn the pilot in case of strong magnetic interference but still allow arming.
This PR changes the COM_ARM_MAG_STR parameter to accept values. If the parameter is set to 2, the check is performed and a warning is logged but the vehicle can still arm.
2021-10-27 09:59:18 +02:00
ponomarevda 2b6bd452df fix hardpoint hardfault by checking argc before std::strcmp 2021-10-27 08:11:23 +02:00
Beat Küng de488f0f40 omnibus/f4sd: add topic listener & change timer order
So it matches the usage in the channel definition order
2021-10-27 08:03:55 +02:00
Beat Küng 8476875b4d Kconfig: add missing serial ports 2021-10-27 08:03:55 +02:00
Beat Küng 48344c6e2a state_machine_helper: add missing 'break' (no behavior change) 2021-10-27 08:03:55 +02:00
Daniel Agar 6d0c6bb6ce
lib/world_magnetic_model: cmake remove helper target BYPRODUCTS
- otherwise ninja will try to rebuild these
2021-10-26 18:52:12 -04:00
dagar a2801bab80 [AUTO COMMIT] update change indication 2021-10-26 14:39:58 -04:00
Daniel Agar 88a979cf1d lib/world_magnetic_model: add cmake helpers for updating tables
- `world_magnetic_model_update` to fetch latest geo_magnetic_tables.hpp
 - `world_magnetic_model_tests_update` to fetch latest test_geo_lookup.cpp
2021-10-26 14:39:58 -04:00
Peter van der Perk 24ab430466
Tools/generate_board_targets_json.py: fix json board targets regression from #17100 2021-10-26 16:15:39 +02:00
bresch d0f89f7fff ekf2: refactor wind reset functions 2021-10-26 10:18:56 +02:00
bresch 456dfcb4b9 ekf2: update getter for true airspeed 2021-10-26 10:18:56 +02:00
bresch 3927c183de ekf2_test: adjust airspeed unit test
an airpseed of > 2m/s is required to start the fusion (set by param)
fw mode is also required

Given the larger estimated windspeed after those changes, the change of
static pressure is larger and the height estimate takes more time to
reach the final value
2021-10-26 10:18:56 +02:00