A parameter spcifies what the redundancy level for 5V rail supply
needs to be and a check makes sure that it's available before
taking off such that the user is aware of a broken or disconnected
redundant power module.
- ecl in PX4/Firmware (af11fa456d7282e324d662a452c71ae85ee59d9b): b3dc06d0cb
- ecl current upstream: 38cbd1a182
- Changes: b3dc06d0cb...38cbd1a18238cbd1a 2020-06-09 Matthias Grob - AlphaFilter: prevent setParameters division by zero
b7d54b5 2020-06-04 RomanBapst - gps: fixed filter initialization bug around gps - do not gps reference altitude to zero in case gps checks pass before the filter initialized - reset the filtered gps position and position derivative filters in case we are in air or there is movement on the ground
8f533cb 2020-06-03 bresch - terrain_estimator: fix sensor aid selection
821e1fa 2020-06-03 bresch - terrain_estimator: add unit tests
aa96fa6 2020-06-03 bresch - Random style fixes in the code
5d6a72e 2020-06-03 bresch - sensor_simulator: add possibility to set GPS position rate
Minimum requirement to use: set IMU_GYRO_RATEMAX to 400.
Logging rate of a single topic: ~85 KB/s. If multiple should be logged,
a really good SD card has to be used.
- sitl_gazebo in PX4/Firmware (39a33a35ae): 20e8dbe115
- sitl_gazebo current upstream: 3ba325b00f
- Changes: 20e8dbe115...3ba325b00f
3ba325b 2020-06-03 Julian Oes - geotagged_images: actually report number of images
92453d1 2020-05-21 JaeyoungLim - Cleanup
9aef888 2020-05-21 JaeyoungLim - Translate yaw to point at the right direction
- at start perform full sensor signal path reset and wait for max time
- issue full sensor reset on any error
- only allocate DRDY perf counter if GPIO is available
- allow running faster than accel ODR (safe limit of 2 kHz in place)
- perform full sensor signal path reset and wait for max time (100 ms)
- issue full sensor reset on any error
- always read FIFO count before transfersj
- only allocate drdy perf counter if GPIO is available
- perform full sensor signal path reset and wait for max time (100 ms)
- issue full sensor reset on any error
- always read FIFO count before transfersj
- only allocate drdy perf counter if GPIO is available
- ecl in PX4/Firmware (d4fcf77c546c31c4c0b813e5034c66581b3b2877): c91c78dcf6
- ecl current upstream: b3dc06d0cb
- Changes: c91c78dcf6...b3dc06d0cbb3dc06d 2020-05-25 Roman Bapst - Added height above ground source bitmask indicating which sensor is used
62e15cb 2020-06-03 bresch - sensor_simulator: set IMU rate to 200Hz as this is the new value used in the Firmware
6126c19 2020-06-03 bresch - sensor_simulator: update EKF at IMU rate
59183f7 2020-06-02 Paul Riseborough - EKF: Reduce EKF-GSF vulnerability to large yaw gyro bias errors (#831)
d0ddda8 2020-05-29 Matthias Grob - tecs: fix typo init(i)alized
86fc94b 2020-05-24 Kamil Ritz - Remove tilt align from position innovation check
b024cdd 2020-05-25 Mathieu Bresciani - unit test: check that the accel bias is only learned when observable (#827)
Greatly improves the noise on the d-term on a Kopis 2. Apparently the order
of filtering vs differentiating matters.
Also disables the DGYRO filter by default, as the D-term now already has
a default filter of 30Hz applied.
It cause bad transfers on a Kopis 2, though not on a bench KakuteF7 unit.
Not sure if this is a single case.
nsh> icm20689 status
INFO [SPI_I2C] Running on SPI Bus 4
INFO [icm20689] FIFO empty interval: 1000 us (1000.000 Hz)
icm20689: transfer: 46375 events, 6790549us elapsed, 146.43us avg, min 54us max 1709us 81.564us rms
icm20689: bad register: 0 events
icm20689: bad transfer: 4284 events
icm20689: FIFO empty: 0 events
icm20689: FIFO overflow: 1 events
icm20689: FIFO reset: 2 events
icm20689: DRDY interval: 375585 events, 124.93us avg, min 99us max 250us 2.322us rms
INFO [drivers_accelerometer] /dev/accel device instance: 0
INFO [drivers_accelerometer] calibration scale: 1.02174 0.99918 0.98338
INFO [drivers_accelerometer] calibration offset: 0.76124 -0.00725 -0.16437
INFO [drivers_gyroscope] /dev/gyro device instance: 0
INFO [drivers_gyroscope] calibration offset: -0.08153 0.02432 0.00050
Julian Oes
Ricardo Marques
Matthias Grob
CUAVcaijie
Mirko Denecke
Daniel Agar
PX4 BuildBot
Beat Küng
David Sidrane
RomanBapst